1 |
C. S. Hong and J. H. Crews, Jr., Stress concentration factors for finite orthotropic laminates with a circular hole and uniaxial loading, NSA TP-1469 (1979)
|
2 |
N. Tsangarakis, Fatigue failure of an orthotropic plate with a circular hole, J. Compos. Mater. 18, 47–57 (1984)
DOI
ScienceOn
|
3 |
F. Z. Hu, C. Soutis and E. C. Edge, Interlaminar stresses in composite laminates with a circular hole, Compos. Struct. 37, 223–232 (1997)
DOI
ScienceOn
|
4 |
S. Sihn, R. Y. Kim, K. Kawabe and S. W. Tsai, Experimental studies of thin-ply laminated composites, Compos. Sci. Technol. 67, 996–1008 (2007)
DOI
ScienceOn
|
5 |
J. Senthilvasan, D. P. Thambiratnam and G. H. Brameld, Dynamic response of a curved bridge under moving truck load, Engng Struct. 24, 1283–1293 (2002)
DOI
ScienceOn
|
6 |
M. R. Kharrazi and S. Sarkani, Frequency-dependent fatigue damage accumulation in fiberreinforced plastics, J. Compos. Mater. 35, 1924–1953 (2001)
DOI
|
7 |
N. Tsangarakism, J. M. Slepetz and J. Nunes, Static and fatigue notch strength prediction in alumina fiber reinforced aluminium plates with a circular hole, J. Compos. Mater. 22, 386–393 (1988)
DOI
|
8 |
T. Shimokawa, Y. Kakuta, Y. Hamaguchi and T. Aiyama, Static and fatigue strengths of a G40-800/5260 carbon fiber/bismaleimide composite material at room temperature and 150 , J. Compos. Mater. 42, 655–679 (2008)
DOI
ScienceOn
|
9 |
S. Yashiro, J. Takatsubo and N. Toyama, An NDT technique for composite structures using visualized Lamb-wave propagation, Compos. Sci. Technol. 67, 3202–3208 (2007)
DOI
ScienceOn
|
10 |
R. Y. Kim and S. L. Donaldson, Experimental and analytical studies on the damage initiation in composite laminates at cryogenic temperatures, Compos. Struct. 76, 62–66 (2006)
DOI
ScienceOn
|
11 |
J. C. Brewer and P. A. Legace, Quadratic stress criterion for initiation of delamination, J. Compos. Mater. 22, 1141–1155 (1988)
|
12 |
C. S. Hong, Stress concentration factors for finite orthotropic graphite/E laminate with a circular hole, Trans. Korean Soc. Mech. Engrs 4, 113–118 (1980)
|
13 |
C. Scarponi and G. Briotti, Ultrasonic technique for the evaluation of delaminations on CFRP, GFRP, KFRP composite materials, Composites Part B: Engng 31, 237–243 (2000)
DOI
ScienceOn
|
14 |
K. Kurashiki, Q. Q. Ni and M. Iwamoto, Fatigue damage evaluation of GFRP using infrared thermography - effects of matrix resin and fiber content on evaluation of fatigue damage, Zairyo/J. Soc. Mater. Sci., Japan 52, 1253–1257 (2003)
|
15 |
J. P. Hou, N. Petrinic and C. Ruiz, A delamination criterion for laminated composites under lowvelocity impact, Compos. Sci. Technol. 61, 2069–2074 (2001)
DOI
ScienceOn
|
16 |
R. J. Nuismer and J. M. Whitney, Uniaxial failure of composite laminates containing stress concentrations, ASTM STP 593, 117–142 (1975)
|
17 |
S.W. Tsai and E.M.Wu, A general theory of strength for anisotropic materials, J. Compos. Mater. 5, 58–80 (1971)
DOI
|
18 |
Y. Hamaguchi and T. Shimokawa, Fatigue Strength of Open Hole Specimens of a T800H/PMR-15 Carbon/Polyimide Composite, Technical Report of National Aerospace Laboratory NAL TR-1392 (1999)
|
19 |
S. C. Tan, Laminated composites containing an elliptical ppening. II. Experiment and model modification, J. Compos. Mater. 21, 949–968 (1987)
DOI
ScienceOn
|
20 |
L. Toubal, M. Karama and B. Lorrain, Damage evolution and infrared thermography in woven composite laminates under fatigue loading, Intl J. Fatigue 28, 1867–1872 (2006)
DOI
ScienceOn
|
21 |
S. Sugimoto and T. Ishikawa, Numerical analysis of heat conduction effect corresponding to infrared stress measurements in multi-lamina CFRP plates, Adv. Compos. Mater.: Official J. Japan Soc. Compos. Mater. 8, 269–279 (1999)
DOI
|
22 |
R. Steinberger, T. I. Valadas Leitao, E. Ladstatter, G. Pinter,W. Billinger and R.W. Rang, Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing, Intl J. Fatigue 28, 1340–1347 (2006)
DOI
ScienceOn
|
23 |
G. Ben, Y. Tanimoto and M. Hashimoto, Transverse shear properties of CFRP laminates under static loading, Zairyo/J. Soc. Mater. Sci., Japan 47, 287–292 (1998)
|