1 |
L. Jain and Y.W. Mai, On the effect of stitching on mode I delamination toughness of laminated composites, Compos. Sci. Technol. 51, 331-345 (1994)
DOI
ScienceOn
|
2 |
K. A. Dransfield, L. K. Jain and Y. W. Mai, On the effects of stitching in CFRPs - I. Mode I delamination toughness, Compos. Sci. Technol. 58, 815-827 (1998)
DOI
ScienceOn
|
3 |
S. Yashiro, N. Takeda, T. Okabe and H. Sekine, A new approach to predicting multiple damage states in composite laminates with embedded FBG sensors, Compos. Sci. Technol. 65, 659-667 (2005)
DOI
ScienceOn
|
4 |
H. Suemasu and O. Majima, Multiple delaminations and their severity in circular axisymmetric plates subjected to transverse loading, J. Compos. Mater. 30, 441-453 (1996)
DOI
|
5 |
M. Z. Shah Khan and A. P. Mouritz, Fatigue behaviour of stitched GRP laminates, Compos. Sci. Technol. 56, 695-701 (1996)
DOI
ScienceOn
|
6 |
F. Aymerich, P. Priolo and C. T. Sun, Static and fatigue behaviour of stitched graphite/epoxy composite laminates, Compos. Sci. Technol. 63, 907-917 (2003)
DOI
ScienceOn
|
7 |
N. Takeda and S. Ogihara, In situ observation and probabilistic prediction of microscopic failure processes in CFRP cross-ply laminates, Compos. Sci. Technol. 52, 183-195 (1994)
DOI
ScienceOn
|
8 |
R. Kamiya, B. A. Cheeseman, P. Popper and C. T.Wei, Some recent advantages in the fabrication and design of three-dimensional textile preforms: a review, Compos. Sci. Technol. 60, 33-47 (2000)
DOI
ScienceOn
|
9 |
O. Majima and H. Suemasu, A finite element analysis of delamination propagation in composite laminates, J. Japan Soc. Compos. Mater. 25, 140-148 (1999)
DOI
|
10 |
L. Jain and Y. W. Mai, Determination of mode II delamination toughness of stitched laminated composites, Compos. Sci. Technol. 55, 241-253 (1995)
DOI
ScienceOn
|
11 |
D. R. J. Owen, Finite Elements in Plasticity. Pineridge Press, Swansea (1980)
|
12 |
T. Okabe, H. Sekine, J. Noda, M. Nishikawa and N. Takeda, Characterization of tensile damage and strength in GFRP cross-ply laminates, Mater. Sci. Engng A - Struct 383, 381-389 (2004)
DOI
ScienceOn
|
13 |
Y. Yamada, N. Yoshimura and T. Sakurai, Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by the finite element method, Int. Mech. Sci. 10, 343-354 (1968)
DOI
ScienceOn
|
14 |
P. H. Geubelle and J. S. Baylor, Impact-induced delamination of composites: a 2D simulation, Composites Part B 29, 589-602 (1998)
DOI
ScienceOn
|
15 |
M. A. Crisfield, G. Jelenic, Y. Mi, H. G. Zhong and Z. Fan, Some aspects of the nonlinear finite element method, Finite Elem. Anal. Des. 27, 19-40 (1997)
DOI
ScienceOn
|
16 |
F. Larsson, Damage tolerance of a stitched carbon/epoxy laminate, Composites Part A 28A, 923-934 (1997)
|
17 |
Y. Iwahori, T. Ishikawa, Y. Hayashi and N. Watanabe, Study of interlaminar fracture toughness improvement on stitched CFRP laminates, J. Japan Soc. Compos. Mater. 26, 90-100 (2000)
DOI
|
18 |
N. A. Warrior, C. D. Rudd and S. P. Gardner, Experimental studies of embroidery for the local reinforcement of composites structures 1. Stress concentrations, Compos. Sci. Technol. 59, 2125-2137 (1999)
DOI
ScienceOn
|
19 |
H. Okamura, An Introduction to Linear Fracture Mechanics. Baifukan, Tokyo (1976)
|
20 |
E. Wu and J. Wang, Behavior of stitched laminates under in-plane tensile and transverse impact loading, J. Compos. Mater. 29, 2254-2279 (1995)
DOI
|
21 |
L. Chen, P. G. Ifju and B. V. Sankar, Analysis of mode I and mode II tests for composites with translaminar reinforcements, J. Compos. Mater. 39, 1311-1333 (2005)
DOI
|