Browse > Article
http://dx.doi.org/10.1007/s43236-022-00455-5

IPOS three-state boost converter and its volt-second balance method based output voltage sharing control strategy for bipolar DC bus applications  

Chen, Zhangyong (School of Automation Engineering, Institute of Electric Vehicle Driving Systems and Safety Technology, University of Electronic Science and Technology of China)
Feng, Chenchen (School of Automation Engineering, Institute of Electric Vehicle Driving Systems and Safety Technology, University of Electronic Science and Technology of China)
Chen, Gen (School of Automation Engineering, Institute of Electric Vehicle Driving Systems and Safety Technology, University of Electronic Science and Technology of China)
Chen, Yong (School of Automation Engineering, Institute of Electric Vehicle Driving Systems and Safety Technology, University of Electronic Science and Technology of China)
Zhu, Xintong (School of Automation Engineering, Institute of Electric Vehicle Driving Systems and Safety Technology, University of Electronic Science and Technology of China)
Publication Information
Journal of Power Electronics / v.22, no.9, 2022 , pp. 1472-1483 More about this Journal
Abstract
The bipolar DC bus configuration has been widely used in DC nano-grids due to its flexibility and stability. Input-parallel-output-series (IPOS) converters are utilized in bipolar DC bus and RES applications due to their simple structure. However, there is a big challenge with this structure. To ensure system safety and stability, the two output voltages of an IPOS converter need to be balanced. On this basis, an IPOS three-state boost converter with a balanced output voltage is proposed in this paper. At the same time, output voltage balance can be obtained by adjusting the duration of the three-state converter based on the volt-second balance method. In the proposed strategy, a switch series diode is added to the IPOS Boost converter topology, and the voltage across the main inductor can be changed through one degree of freedom, where the corresponding output voltage is regulated due to a change in inductor voltage. In addition, under different dead time conditions, adjusting the gate drive of the switch can be used to achieve voltage balance. Moreover, a comprehensive analysis and relative calculations are provided. Finally, a 20-200 V prototype is built to verify the analysis.
Keywords
Bipolar DC bus; IPOS converter; Unequal dead time; Voltage imbalance; Three-state converter;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Rodriguez-Diaz, E., Chen, F., Vasquez, J.C., Guerrero, J.M., Burgos, R., Boroyevich, D.: Voltage-level selection of future twolevel lvdc distribution grids: a compromise between grid compatibiliy, safety, and efficiency. IEEE Electr. Mag. 4(2), 20-28 (2016)   DOI
2 Rivera, S., Lizana, F.R., Kouro, S., Dragicevic, T., Wu, B.: Bipolar DC power conversion: state-of-the-art and emerging technologies. IEEE J. Emerg. Sel. Top. Power Electron. 9(2), 1192-1204 (2021)   DOI
3 Zubieta, L.E.: Are microgrids the future of energy?: DC microgrids from concept to demonstration to deployment. IEEE Electr. Mag. 4(2), 37-44 (2016)   DOI
4 Park, J., Byun, H., Kim, B., Kim, S., Won, C.: Analysis and design of coupled-inductor for interleaved buck-type voltage balancer in bipolar DC microgrid. Energies 13(11), 2775 (2020)   DOI
5 Kim, S., Cha, H., Kim, H.-G.: High-efficiency voltage balancer having DC-DC converter function for EV charging station. IEEE J. Emerg. Sel. Top. Power Electron. 9(1), 812-821 (2021)   DOI
6 de Andrade, J.M., Salvador, M.A., Coelho, R.F., Lazzarin, T.B.: General method for synthesizing high gain step-up DC-DC converters based on differential connections. IEEE Trans. Power. Electron. 35(12), 13239-13254 (2020)   DOI
7 Zhuo, S., Gaillard, A., Paire, D., Gao, F.: High-order ESO-based voltage control for high-gain DC-DC floating interleaved boost converter with time-varying disturbance. In: IEEE Transportation Electrification Conference and Expo (ITEC), pp. 1-6. (2019)
8 Zhuo, S., Xu, L., Gaillard, A., Huangfu, Y., Paire, D., Gao, F.: Robust open-circuit fault diagnosis of multi-phase floating interleaved DC-DC boost converter based on sliding mode observer. IEEE Trans. Transp. Electrif. 5(3), 638-649 (2019)   DOI
9 Huangfu, Y., Zhuo, S., Chen, F., Pang, S., Zhao, D., Gao, F.: Robust voltage control of floating interleaved boost converter for fuel cell systems. IEEE Trans. Ind. Appl. 54(1), 665-674 (2018)   DOI
10 Chew, B.S.H., Xu, Y., Wu, Q.: Voltage balancing for bipolar DC distribution grids: a power flow based binary integer multi-objective optimization approach. IEEE Trans. Power Syst. 34(1), 28-39 (2019)   DOI
11 Zhang, X., Gong, C., Yao, Z.: Three-level DC converter for balancing DC 800-V voltage. IEEE Trans. Power Electron. 30(7), 3499-3507 (2015)   DOI
12 Garcia, F.S., Pomilio, J.A., Spiazzi, G.: Modeling and control design of the interleaved double dual boost converter. IEEE Trans. Ind. Electron. 60(8), 3283-3290 (2013)   DOI
13 Kang, H., Cha, H.: A new nonisolated high-voltage-gain boost converter with inherent output voltage balancing. IEEE Trans. Ind. Electron. 65(3), 2189-2198 (2018)   DOI
14 Wang, H., Wu, W., Li, Y., Blaabjerg, F.: A coupled-inductor-based buck-boost AC-DC converter with balanced DC output voltages. IEEE Trans. Power Electron. 34(1), 151-159 (2019)   DOI
15 Wang, H., Wu, W., Gao, N., He, Y., Chung, H.S., Blaabjerg, F.: Modified dual buck-boost AC/DC converter with self-balanced DC output voltages. IET Power Electron. 12, 1170-1178 (2019)   DOI
16 Wang, H., Wu, W., Chung, H.S., Blaabjerg, F.: Coupled-inductorbased aalborg inverter with input DC energy regulation. IEEE Trans. Ind. Electron. 65(5), 3826-3836 (2018)   DOI
17 Wang, F., Lei, Z., Xu, X., Shu, X.: Topology deduction and analysis of voltage balancers for DC microgrid. IEEE J. Emerg. Sel. Top. Power Electron. 5(2), 672-680 (2017)   DOI
18 Koyama, K., Tada, Y., Uno, M.: Highly extendable interleaved high step-up boost converter with automatic current balancing and reduced semiconductor voltage stresses for renewable energy systems. In: IECON The 46th Annual Conference of the IEEE Industrial Electronics Society, pp. 1335-1341. (2020)
19 Bhaskar, M.S., Meraj, M., Iqbal, A., Al-ammari, R., Padmanaban, S.: New DC-DC multilevel configurations of 2L-Y boost converters with high voltage conversion ratio for renewable energy applications. In: IEEE 28th International Symposium on Industrial Electronics (ISIE), pp. 2527-2532. (2019)
20 Liao, J., Zhou, N., Huang, Y., Wang, Q.: Unbalanced voltage suppression in a bipolar DC distribution network based on DC electric springs. IEEE Trans. Smart Grid 11(2), 1667-1678 (2020)   DOI
21 Tan, L., Wu, B., Yaramasu, V., Rivera, S., Guo, X.: Effective voltage balance control for bipolar-DC-bus-fed EV charging station with three-level DC-DC fast charger. IEEE Trans. Ind. Electron. 63(7), 4031-4041 (2016)
22 Tan, L., Wu, B., Rivera, S., Yaramasu, V.: Comprehensive DC power balance management in high-power three-level DC-DC converter for electric vehicle fast charging. IEEE Trans. Power Electron. 31(1), 89-100 (2016)   DOI
23 Rivera, S., Wu, B.: Electric vehicle charging station with an energy storage stage for split-DC bus voltage balancing. IEEE Trans. Power Electron. 32(3), 2376-2386 (2017)   DOI
24 Kim, S., Nam, H.-T., Cha, H., Kim, H.-G.: Investigation of selfoutput voltage balancing in input-parallel output-series DC-DC converter. IEEE J. Emerg. Sel. Top. Power Electron. 8(3), 2850-2860 (2020)   DOI
25 Ferrera, M.B., Litran, S.P., Duran Aranda, E., Andujar Marquez, J.M.: A converter for bipolar DC link based on SEPIC-cuk combination. IEEE Trans. Power Electron. 30(12), 6483-6487 (2015)   DOI
26 Nathan, K., Ghosh, S., Siwakoti, Y., Long, T.: A new DC-DC converter for photovoltaic systems: coupled-inductors combined cuk- SEPIC converter. IEEE Trans. Energy Convers. 34(1), 191-201 (2019)   DOI
27 Prabhakaran, P., Agarwal, V.: Novel boost-SEPIC type interleaved DC-DC converter for mitigation of voltage imbalance in a lowvoltage bipolar DC microgrid. IEEE Trans. Ind. Electron. 67(8), 6494-6504 (2020)   DOI
28 Li, B., et al.: DC/DC converter for bipolar LVdc system with integrated voltage balance capability. IEEE Trans. Power Electron. 36(5), 5415-5424 (2021)   DOI
29 Sim, J., Lee, J.Y., Jung, J.H.: Isolated three-port DC-DC converter employing ESS to obtain voltage balancing capability for bipolar LVDC distribution system. J. Power Electron. 20, 802-810 (2020)   DOI
30 Lee, J.-Y., Kim, H.-S., Jung, J.-H.: Enhanced dual-active-bridge DC-DC converter for balancing bipolar voltage level of DC distribution system. IEEE Trans. Ind. Electron. 67(12), 10399-10409 (2020)   DOI
31 Zhuo, S., Gaillard, A., Paire, D., Breaz, E., Gao, F.: Design and control of a floating interleaved boost DC-DC converter for fuel cell applications. In: IECON-44th Annual Conference of the IEEE Industrial Electronics Society, pp. 2026-2031 (2018)
32 Kim, S., Kim, H., Cha, H.: A new voltage balancer with DC- DC converter function. In: Asian Conference on Energy, Power and Transportation Electrification (ACEPT), pp. 1-7. Singapore, (2018)