Browse > Article
http://dx.doi.org/10.6113/JPE.2019.19.5.1087

Analysis of Key Parameters for Inductively Coupled Power Transfer Systems Realized by Detuning Factor in Synchronous Generators  

Liu, Jinfeng (Engineering Research Center of Automotive Electronics Drive Control and System Integration, Ministry of Education, Harbin University of Science and Technology)
Li, Kun (Engineering Research Center of Automotive Electronics Drive Control and System Integration, Ministry of Education, Harbin University of Science and Technology)
Jin, Ningzhi (Engineering Research Center of Automotive Electronics Drive Control and System Integration, Ministry of Education, Harbin University of Science and Technology)
Iu, Herbert Ho-Ching (School of Electrical, Electronics and Computer Engineering, University of Western Australia)
Publication Information
Journal of Power Electronics / v.19, no.5, 2019 , pp. 1087-1098 More about this Journal
Abstract
In this paper, a detuning factor (DeFac) method is proposed to design the key parameters for optimizing the transfer power and efficiency of an Inductively Coupled Power Transfer (ICPT) system with primary-secondary side compensation. Depending on the robustness of the system, the DeFac method can guarantee the stability of the transfer power and efficiency of an ICPT system within a certain range of resistive-capacitive or resistive-inductive loads. A MATLAB-Simulink model of a ICPT system was built to assess the system's main evaluation criteria, namely its maximum power ratio (PR) and efficiency, in terms of different approaches. In addition, a magnetic field simulation model was built using Ansoft to specify the leakage flux and current density. Simulation results show that both the maximum PR and efficiency of the ICPT system can reach almost 70% despite the severe detuning imposed by the DeFac method. The system also exhibited low levels of leakage flux and a high current density. Experimental results confirmed the validity and feasibility of an ICPT system using DeFac-designed parameters.
Keywords
Detuning factor; Efficiency; ICPT; Resonant compensation; Rotary transformer; Transfer power;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 X. Liu, W. M. Ng, C. K. Lee, and S. Y. Hui, "Optimal operation of contactless transformers with resonance in secondary circuits," in Conf. Proc. IEEE Appl. Power Electron. Conf. Expo., APEC, pp. 645-650, 2008.
2 M. Hedieh and M. Axel, "Design metrics of compensation methods for contactless charging of electric vehicles," in Euro. Conf. Power Electron. Appl., EPE ECCE Europe, pp. 1-10, 2017.
3 H. H. Wu, G. A. Covic, J. T. Boys, and D. J. Robertson, “Series-tuned inductive-power-transfer pickup with a controllable AC-voltage output,” IEEE Trans. Power Electron., Vol. 26, No. 1, pp. 98-109, Aug. 2011.   DOI
4 J. Hua, H. Z. Wang, Y. Zhao, and A. L. Zou, "LCL resonant compensation of movable ICPT systems with a multi-load," J. Power Electron., Vol. 15, No.6, pp. 1654-1663, Nov. 2015.   DOI
5 Y. J. Luan, B. Lin, and Q. Yang, “Effect of temperature and radial force on the transmission performance of contactless power transfer for rotary ultrasonic grinding,” IET Eletr. Power Appl., Vol. 11, No. 7, pp. 1169-1176, Aug. 2017.   DOI
6 C. Auvigne, P. Germano, D. Ladas, and Y. Perriard, "A dual-topology ICPT applied to an electric vehicle battery charger," in Proc. Int. Conf. Electr. Mach, pp. 2287-2292, 2012.
7 A. Momeneh, M. Castilla, I. M. M. Ghahderjan, and J. Miret, “Analysis, design and implementation of a residential inductive contactless energy transfer system with multiple mobile clamps,” IET Power Electron., Vol. 10, No. 8, pp. 875-883, Jun. 2017.   DOI
8 S. J. Huang, S. H. Dai, J. L. Su, and T. S. Li, "Design of a contactless power supply system with dual output capability for AGV applications," in IEEE Glob. Conf. Consum. Electron., GCCE, pp. 1-3, 2017.
9 C. Y. Xia, W. Wang, G. P. Chen, and X. J. Wu, “Robust control for the relay ICPT system under external disturbance and parametric uncertainty,” IEEE Trans. Contr. Syst. Technol., Vol. 25, No. 6, pp. 2168-2175, Nov. 2017.   DOI
10 S. H. Chang, P. Y. Chen, Y. H. Ting, and S. W. Hung, “Robust current control-based sliding mode control with simple uncertainties estimation in permanent magnet synchronous motor drive systems,” IET Electr. Power Appl., Vol. 4, No. 6, pp. 441-450, Jul. 2010.   DOI
11 Y. Li, Y. X. Zhang, Q. X Yang, and Z. Yan, “Analysis and experimental validation on maximum power and efficiency in wireless power transfer system via coupled magnetic resonances,” Diangong Jishu Xuebao, Vol. 31, No. 2, pp. 18-24, Jan. 2016.
12 M. Y. Yang, P. Wang, Y. Z. G, and Z. F. Yang, “Models and experiments for the main topologies of MRC-WPT systems,” J. Power Electron., Vol. 17, No. 6, pp. 1694-1706, Nov. 2017.   DOI
13 X. D. Wang, M. C. Yang, J. F. Liu, and Y. Yu, “Transient analysis of contactless excitation systems with relative rotating pot core transformers,” Proc. the CSEE, Vol. 35, No. 22, pp. 5915-5923, Nov. 2015.
14 T. Imura, "Study on maximum air-gap and efficiency of magnetic resonant coupling for wireless power transfer using equivalent circuit," in IEEE Int. Symp. Ind. Electron., pp. 3664-3669, 2010.
15 C. Fang, X. F. Li, Z. M. Xie, and J. Y. Xu, “Design and optimization of an inductively coupled power transfer system for the underwater sensors of ocean buoys,” Energies, Vol. 10, No. 1, pp. 23-32, Jan. 2017.   DOI
16 M. W. Lin, D.J. Li, and C. J. Yang, "Design of an ICPT system for battery charging applied to underwater docking systems," Ocean Eng., Vol. 145, pp. 373-381, Nov. 2017.   DOI
17 J. T. Boys, G. A. Covic, and G. A. J. Elliott, “Pick-up transformer for ICPT applications,” Electron. Lett., Vol. 38, No. 21, pp. 1276-1278, Oct. 2002.   DOI
18 K. Keisuke, “Development trend of inductive power transfer systems with focus on transmission frequency and transmission power,” IEEJ Trans. Ind. Appl, Vol. 137, No. 5, pp. 445-457, Feb. 2017.   DOI
19 A. Dukju and H. Songcheol, “A study on magnetic field repeater in wireless power transfer,” IEEE Trans. Ind. Electron., Vol. 60, No. 1, pp. 360-371, Apr. 2013.   DOI
20 H. Z. Z. Beh, G. A. Covic, and B. John, “Wireless Fleet Charging System for Electric Bicycles,” IEEJ. Emerg. Sel. Top. Power Electron., Vol. 3, No. 1, pp. 75-86, Mar. 2015.   DOI
21 C. S. Wang, O. H. Stielau, and G. A. Covic., “Design considerations for a contactless electric vehicle battery charger,” IEEE Trans. Ind. Electron., Vol. 52, No. 5, pp. 1308-1314, Oct. 2005.   DOI
22 Y. Li, Q. X. Yang, Z. Yan, and C. Zhang, “Analysis on effective range of wireless power transfer and its impact factors,” Diangong Jishu Xuebao, Vol. 28, No. 1, pp. 106-122, Jan. 2013.
23 X. Li, Y. Sun, Z. H. Wang, and C. S. Tan, “Development of current-fed ICPT system with quasi sliding mode control,” WSEAS Trans. Circuits Syst., Vol. 11, No. 11, pp. 351-360, Nov. 2012.
24 Y Sun, C. Y. Xia, X. Dai, and Y. G. Su, "Analysis and optimization of mutual inductance for inductively coupled power transfer system," Proc. the CSEE, Vol. 30, No. 33, pp. 44-55, Nov. 2010.
25 X. Zhang, Q. X. Yang, and H. Y. Chen, "Research on characteristics of frequency splitting in electromagnetic coupling resonant power transmission systems," Proc. the CSEE, Vol. 32, No. 9, pp. 167-173, Mar. 2012.
26 Y. Li, Q. X. Y, Z. Yan, and H. Y. Chen, “Characteristic of frequency in wireless power transfer system via magnetic resonance coupling,” Electric Machines and Control, Vol. 16, No. 7, pp. 7-11, Jul. 2012.   DOI
27 N. Y. Kim, K. Y. Kim, and C. W. Kim, "Automated frequency tracking system for efficient mid-range magnetic resonance wireless power transfer," Microwave Opt. Technol. Lett., Vol. 54, No.6, pp. 1423-1426, Jun. 2012.   DOI
28 R. K. M, Y. R. Lin, and Y. Li, “An active-rectifier-based maximum efficiency tracking method using an additional measurement coil for wireless power transfer,” IEEE Trans. Power Electron., Vol. 33, No. 1, pp. 716-728, Jan. 2018.   DOI
29 E. R. Joy, B. K. Kushwaha, G. Rituraj, and P. Kuma, "Analysis and Comparison of four compensation topologies of contactless power transfer system," in Int. Conf. Electr. Power Energy Convers. Syst., EPECS, pp. 1-6, 2015.
30 M. C. Yan, X. D. Wang, J. F. Liu, and Y. Yu, “Analysis of contactless excitation power supply resonance compensation,” Electric Machines and Control, Vol. 19, No. 3, pp. 45-53, Mar. 2015.
31 Y. J. Wang, Y. S. Yao, X. S. Liu, and D. G. Xu, “An LC/S compensation topology and coil design technique for wireless power transfer,” IEEE Trans. Power Electron., Vol. 33, No. 3, pp. 2007-2025, Mar. 2018.   DOI