Browse > Article
http://dx.doi.org/10.6113/JPE.2018.18.1.23

A SiC MOSFET Based High Efficiency Interleaved Boost Converter for More Electric Aircraft  

Zaman, Haider (School of Automation, Northwestern Polytechnical University)
Zheng, Xiancheng (School of Automation, Northwestern Polytechnical University)
Yang, Mengxin (School of Automation, Northwestern Polytechnical University)
Ali, Husan (School of Automation, Northwestern Polytechnical University)
Wu, Xiaohua (School of Automation, Northwestern Polytechnical University)
Publication Information
Journal of Power Electronics / v.18, no.1, 2018 , pp. 23-33 More about this Journal
Abstract
Silicon Carbide (SiC) MOSFET belongs to the family of wide-band gap devices with inherit property of low switching and conduction losses. The stable operation of SiC MOSFET at higher operating temperatures has invoked the interest of researchers in terms of its application to high power density (HPD) power converters. This paper presents a performance study of SiC MOSFET based two-phase interleaved boost converter (IBC) for regulation of avionics bus voltage in more electric aircraft (MEA). A 450W HPD, IBC has been developed for study, which delivers 28V output voltage when supplied by 24V battery. A gate driver design for SiC MOSFET is presented which ensures the operation of converter at 250kHz switching frequency, reduces the miller current and gate signal ringing. The peak current mode control (PCMC) has been employed for load voltage regulation. The efficiency of SiC MOSFET based IBC converter is compared against Si counterpart. Experimentally obtained efficiency results are presented to show that SiC MOSFET is the device of choice under a heavy load and high switching frequency operation.
Keywords
High Power Density (HPD); Interleaved Boost Converter (IBC); More Electrical Aircraft (MEA); Peak Current Mode Control (PCMC); Silicon Carbide (SiC);
Citations & Related Records
연도 인용수 순위
  • Reference
1 X. Roboam, B. Sareni, and A. D. Andrade, "More electricity in the air: Toward optimized electrical networks embedded in more-electrical aircraft," IEEE Ind. Electron. Mag., Vol. 6, No. 4, pp. 6-17, Dec. 2012.   DOI
2 B. Sarlioglu and C. T. Morris, "More electric aircraft: Review, challenges, and opportunities for commercial transport aircraft," IEEE Trans. Transport. Electrific., Vol. 1, No. 1, pp. 54-64, Jun. 2015.   DOI
3 X. Roboam, O. Langlois, H. Piquet, B. Morin, and C. Turpin, "Hybrid power generation system for aircraft electrical emergency network," IET Electrical Syst. Transport., Vol. 1, No. 4, pp. 148-155, Dec. 2011.   DOI
4 A. Diab-Marzouk and O. Trescases, "SiC-based bidirectional cuk converter with differential power processing and MPPT for a solar powered aircraft," IEEE Trans. Transport. Electrific., Vol. 1, No. 4, pp. 369-381, Dec. 2015.   DOI
5 J. Wang, X. Zhou, J. Li, T. Zhao, A. Q. Huang, R. Callanan, F. Husna, and A. Agarwal,"10-kV SiC MOSFET-based boost converter," IEEE Trans. Ind. Appl., Vol. 45, No. 6, pp. 2056-2063, Nov. 2009.   DOI
6 C. E. Weitzel, J. W. Palmour, C. H. Carter, K. Moore, K. K. Nordquist, S. Allen, C. Thero, and M. Bhatnagar, “Silicon carbide high-power devices,” IEEE Trans. Electron. Dev., Vol. 43, No. 10, pp. 1732-1741, Oct. 1996.   DOI
7 J. Liu, K. L. Wong, S. Allen, and J. Mookken, "Performance evaluations of hard-switching interleaved DC/DC boost converter with new generation silicon carbide MOSFETs," Cree Inc, pp. 1-6, 2013.
8 D. Han, J. Noppakunkajorn, and B. Sarlioglu, "Comprehensive efficiency, weight, and volume comparison of SiC- and Si-based bidirectional DC-DC converters for hybrid electric vehicles," IEEE Trans. Veh. Technol., Vol. 63, No. 7, pp. 3001-3010, Sep. 2014.   DOI
9 F. Lacressonnire, E. Bru, G. Fontes, and X. Roboam, "Experimental validation of a hybrid emergency network with low and medium voltage Li-Ion batteries for more electrical aircraft," in Power Electronics and Applications (EPE), 2013 15th European Conference on, pp. 1-9, 2013.
10 E. Bataller-Planes, N. Lapena-Rey, J. Mosquera, F. Ort, J, Oliver, O. Garcia, and F. Moreno, "Power balance of a hybrid power source in a power plant for a small propulsion aircraft," IEEE Trans. Power Electron., Vol. 24, No. 12, pp. 2856-2866, Dec. 2009.   DOI
11 B. Bryant and M. K. Kazimierczuk, "Modeling the closed-current loop of PWM boost DC-DC converters operating in CCM with peak current-mode control," IEEE Trans. Circuits Syst. I: Reg. Papers, Vol. 52, No. 11, pp. 2404-2412, Nov. 2005.   DOI
12 O. Hegazy, J. V. Mierlo, and P. Lataire, “Analysis, modeling, and implementation of a multidevice interleaved DC/DC converter for fuel cell hybrid electric vehicles,” IEEE Trans. Power Electron., Vol. 27, No. 11, pp. 4445-4458, Nov. 2012.   DOI
13 J. R. Tsai, T. F. Wu, C. Y. Wu, Y. M. Chen, and M. C. Lee, “Interleaving phase shifters for critical-mode boost PFC,” IEEE Trans. Power Electron., Vol. 23, No. 3, pp. 1348-1357, May 2008.   DOI
14 D. H. Kim, G. Y. Choe, and B. K. Lee, “DCM analysis and inductance design method of interleaved boost converters,” IEEE Trans. Power Electron., Vol. 28, No. 10, pp. 4700-4711, Oct. 2013.   DOI
15 D. Peftitsis and J. Rabkowski, “Gate and base drivers for silicon carbide power transistors: An overview,” IEEE Trans. Power Electron., Vol. 31, No. 10, pp. 7194-7213, Oct. 2016.   DOI
16 J. He, M. E. Jacobs, and K. Sridhar, "Gate drive circuit for isolated gate devices and method of operation thereof," ed: Google Patents, 2000.
17 D. Aggeler, F. Canales, J. Biela, and J. W. Kolar, “Dv/Dt-control methods for the SiC JFET/Si MOSFET cascode,” IEEE Trans. Power Electron., Vol. 28, No. 8, pp. 4074-4082, Aug. 2013.   DOI
18 D. P. Sadik, J. Colmenares, G. Tolstoy, D. Peftitsis, M. Bakowski, J. Rabkowski, and H.-P. Nee, "Short-circuit protection circuits for silicon-carbide power transistors," IEEE Trans. Ind. Electron., Vol. 63, No. 4, pp. 1995-2004, Apr. 2016.   DOI
19 A. Ghosh, S. Banerjee, M. K. Sarkar, and P. Dutta, "Design and implementation of type-II and type-III controller for DC-DC switched-mode boost converter by using k-factor approach and optimisation techniques," IET Power Electron., Vol. 9, No. 5, pp. 938-950, Apr. 2016.   DOI
20 N. Kondrath and M. K. Kazimierczuk, “Control current and relative stability of peak current-mode controlled pulse-width modulated DC-DC converters without slope compensation,” IET Power Electron., Vol. 3, No. 6, pp. 936-946, Nov. 2010.   DOI
21 M. Sanz, V. Valdivia, P. Zumel, D. L. d. Moral, C. Fernandez, A. Lazaro, and A. Barrado, "Analysis of the stability of power electronics systems: A practical approach," in 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014, pp. 2682-2689, 2014.
22 N. Kondrath and M. K. Kazimierczuk, "Loop gain and margins of stability of inner-current loop of peak current-mode-controlled PWM DC-DC converters in continuous conduction mode," IET Power Electron., Vol. 4, No. 6, pp. 701-707, Jul. 2011.   DOI
23 A. Riccobono and E. Santi, "Comprehensive review of stability criteria for DC power distribution systems," IEEE Trans. Ind. Appl., Vol. 50, No. 5, pp. 3525-3535, Oct. 2014.   DOI