Browse > Article
http://dx.doi.org/10.6113/JPE.2013.13.1.77

A Dead Time Compensation Algorithm of Independent Multi-Phase PMSM with Three-Dimensional Space Vector Control  

Park, Ouk-Sang (STX Engine)
Park, Je-Wook (Dept. of Electrical Eng., Pusan National University)
Bae, Chae-Bong (Dept. of LV drive, LSIS)
Kim, Jang-Mok (Dept. of Electrical Eng., Pusan National University)
Publication Information
Journal of Power Electronics / v.13, no.1, 2013 , pp. 77-85 More about this Journal
Abstract
This paper proposes a new dead time compensation method of independent six-phase permanent magnet synchronous motors (IS-PMSM). The current of the independent phase machines contains odd-numbered harmonics because of the dead time and the nonlinear characteristics of the switching devices. By using the d-q-n three-dimensional vector analysis, these harmonics can be extracted at the n-axis current. Thus, the current distortion can be compensated by controlling the n-axis current of the IS-PMSM to zero. The proposed method is simple and can be easily implemented without additional hardware setup. The validity of the proposed compensation method is verified with simulations and several experiments.
Keywords
Current harmonics; Dead time; Independent phase; IS-PMSM; Vector control;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 P. Zhao and G. Yang, "Torque density improvement of five-phase pmsm drive for electric vehicles applications," Journal of Power Electronics, Vol. 11, No. 4, pp. 401-407, Jul. 2011.   DOI   ScienceOn
2 G. K. Singh, "Multi-phase induction machine drive research a survey," Electric Power Systems Res, Vol. 62, pp. 139-147, 2002.   DOI   ScienceOn
3 R. Bojoi, F. Farina, A. Tenconi, and F. Profumo, "Analysis of the asymmetrical operation of dual three-phase induction machines," Conf. Rec. IEEE IEMDC, pp. 429-435, 2003.
4 R. Bojoi, A. Tenconi, and F. Profumo: "Digital synchronous frame current regulation for dual-three phase induction motor drives," Conf. Rec. IEEE PESC, pp. 1475-1480, 2003.
5 T. Gopalarathnam, S. Waikar, H. A. Toliyat, M. S. Arefeen, J. C. Moreira, "Development of low cost multi-phase brushless permanent magnet (BPM) motors with unipolar current excitations", Proceedings of the IEEE-IAS 1999 Annual Meeting, Phoenix, AZ, Oct. 3-7, 1999, pp. 173-179, 1999.
6 Y. Murai, T. Watanabe, and H. Iwasaki, "Waveform distortion and correction circuit for PWM inverters with switching lag-times," IEEE Trans. Ind. Appl., Vol. IA-23, No. 5, pp. 881-886, Sep./Oct. 1987.   DOI
7 S. G. jeong and M. H. Park, "The analysis and compensation of deadtime effects in PWM inverters," IEEE Trans. Ind. Electron., Vol. 38, No. 2, pp. 108-114, Apr. 1991.   DOI   ScienceOn
8 D. Leggate and R. Kerkman, "Pulse-based dead-time compensator for PWM voltage inverters," IEEE Trans. Ind. Electron., Vol. 38, No. 2, pp. 191-197, Apr. 1997.
9 J. W. Choi and S.-K. Sul, "Inverter output voltage synthesis using novel dead time compensation," IEEE Trans. Power Electron., Vol. 11, No. 2, pp. 221-227, Mar. 1996.   DOI   ScienceOn
10 T. Sukegawa, K. Mizuno, T. Matsui, and T. Okuyama, "Fully digital, vector controlled PWM VSI-fed ac drives with an inverter dead-time compensation strategy," IEEE Trans. Ind. Appl., Vol. 27, No. 3, pp. 552-559, May/Jun., 1991.   DOI   ScienceOn
11 H. Zhao, Q. M. J. Wu, and A. Kawamura, "An accurate approach of nonlinearity compensation for VSI inverter output voltage," IEEE Trans. Power Electron., Vol. 19, No. 14, pp. 1029-1035, Jul. 2004.   DOI   ScienceOn
12 A. Cichowski and J. Nieznanski, "Self-tuning dead-time compensation method for voltage-source inverters," IEEE Power Electronics. Letter, Vol. 3, No. 2, pp. 72-75, Jun. 2005.   DOI   ScienceOn
13 S. Sayeef and M. F. Rahman, "Improved flux and torque estimators of a direct torque controlled interior PM machine with compensations for dead-time effects and forward voltage drops," Journal of Power Electronics, Vol. 9, No. 3, pp. 438-446, May 2009.
14 A. R. Munoz and T. A. Lipo, "On-line dead-time compensation technique for open-loop PWM-VSI drives," IEEE Trans. Power Electron., Vol. 14, No. 4, pp. 683-689, Jul. 1999.   DOI   ScienceOn
15 H. M. Ryu, J. H. Kim, and S.K. Sul, "Analysis of multiphase space vector pulse-width modulation based on multiple d-q spaces concept", IEEE Trans. Power Electron., Vol. 20, No. 6, pp. 1364-1371, Nov. 2005.   DOI   ScienceOn
16 H. S. Kim, H. T. Moon, and M. J. Youn, "On-line dead-time compensation method using disturbance observer," IEEE Trans. Power Electron., Vol. 18, No. 6, pp. 1336-1345, Nov. 2003.   DOI   ScienceOn
17 N. Urasaki, T. Senjyu, K. Uezato, and T. Funabashi, "Adaptive dead-time compensation strategy for permanent magnet synchronous motor drive," IEEE Trans. Energy Convers., Vol. 22, No. 2, pp. 271-280, Jun. 2007.   DOI   ScienceOn
18 K. R. Cho and J. K. Seok, "Inverter nonliearity compensation in the presence of current measurement errors and switching device parameter uncertainties," IEEE Trans. Power Electron., Vol. 22, No. 2, pp. 576-583, Mar. 2007.   DOI   ScienceOn
19 H. M. Ryu and S. K. Sul, "Multiple d-q Spaces Concept for Multi-Phase AC Motor Drive," ICPE(ISPE), pp. 670-674, 2004.
20 J. Holz, "Pulsewidth Modulation-A Survey," IEEE Trans. Industrial Electron., Vol.39, No.5, pp.410-420, Dec. 1992   DOI   ScienceOn
21 H. W. Van der Broeck, and H. C. Skudelny, "Analysis and realization of a pulsewidth modulator based on voltage space vectors," IEEE Trans. Ind. Appl., Vol.24, pp.142-150, Jan./Feb. 1988.   DOI   ScienceOn
22 P. Khluabwannarat. C. Thammarat, S. Tadsuan, and S. Bunjongjit, "An analysis of iron loss supplied by sinusoidal, square wave, bipolar PWM inverter and unipolar PWM inverter," in IPEC 2007, pp. 1185-1190, 2007.
23 S. H. Hwang and J. M. Kim, "Dead time compensation method for voltage-fed pwm inverter," IEEE Trans. Energy Convers., Vol. 25, No. 1, pp 1-10, Mar. 2010.   DOI   ScienceOn
24 SIMULINK Model Based and System Based Design, The Math Works Inc., Natick, MA, 2002.