Browse > Article

Active Vibration Suppression of a Flexible Structure Using Sliding Mode Control  

Itik Mehmet (Erciyes University, Yozgat Engineering and Architecture Faculty, Mechanical Engineering Department)
Salamci Metin U. (Gazi University, Engineering and Architecture Faculty, Mechanical Engineering Department)
Publication Information
Journal of Mechanical Science and Technology / v.20, no.8, 2006 , pp. 1149-1158 More about this Journal
Abstract
In this paper, sliding mode control (SMC) is designed and applied to an elastic structure to suppress some of its vibration modes. The system is an elastic beam clamped on one end and the designed controller uses only the deflection measurement of the free end. The infinite dimensional mathematical model of the beam is reduced to an ordinary differential equation set to represent the behavior of required modes. Since the states of the finite dimensional model are not physically measurable quantities, an observer is designed to estimate these states by measuring the tip deflection of the beam. The performance of the observer is important because the observed states are used in the SMC design. In this study, by using the output information, an observer is designed and tested to estimate the states of the finite dimensional model of the beam. Then the designed SMC is applied to the experimental beam system which gives satisfactory suppressed vibrations.
Keywords
Sliding Mode Control; Active Vibration Control; Observer Design; Elastic Structures;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
Times Cited By Web Of Science : 0  (Related Records In Web of Science)
Times Cited By SCOPUS : 1
연도 인용수 순위
1 Zames, G., 1981, 'Feedback and Optimal Sensitivity: Model Reference Transformations, Multiplicative Seminorms, and Approximate Inverses,' IEEE Trans. On Automatic Control, Vol. AC-26, No.2, pp. 301-320   DOI
2 Zinober, A. S. I., (editor), 1990, 'Deterministic Control of Uncertain Systems,' Peter Peregrinus Ltd., London
3 Young, K. K. D., (editor), 1993, 'Variable Structure Control for Robotics and Aerospace Applications,' Elsevier, Amsterdam
4 Young, K. K. D. and Ozguner, U., 1993, 'Frequency Shaping Compensator Design for Sliding Mode,' International Journal of Control, Vol. 57, No.5, pp. 1005-1019   DOI   ScienceOn
5 Spurgeon, S. K. and Edwards, C., 1998, 'Sliding Mode Control: Theory and Applications,' Taylor & Francis, London
6 Zames, G. and Francis, B.A., 1983, 'Feedback Minimax Sensitivity and Optimal Robustness,' IEEE Trans. On Automatic Control, Vol. AC-28, No.5, pp. 585-600   DOI
7 Salamci, M. U., Ozgoren, M. K. and Banks, S. P., 2000, 'Sliding Mode Control with Optimal Sliding Surfaces for a Missile Autopilot Design,' AIAA Journal of Guidance, Control and Dynamics, Vol. 23, No.4, pp. 719-727   DOI   ScienceOn
8 Shin, H. C. and Choi, S. B., 2001, 'Position Control of Two Link Flexible Manipulator Featuring Piezoelectric Actuators and Sensors,' Mechatronics, Vol. 11, pp. 707-729   DOI   ScienceOn
9 Utkin, V.I. and Yang, K. D., 1978, 'Methods for Constructing Discontinuity Planes in Multidimensional Variable Structure Systems,' Automation and Remote Control, Vol. 39, pp. 1466-1470
10 Utkin, V. I., 1992, 'Sliding Modes in Control and Optimization,' Springer Verlag, Berlin
11 Dorling, C. M. and Zinober, A. S. I., 1986, 'Two Approaches to Hyperplane Design in Multivariable Structure Control Systems,' International Journal of Control, Vol. 44, pp. 65-82   DOI   ScienceOn
12 Itik, M., Salamci, M. D., Ulker, F. D. and Yaman, Y., 2005, 'Active Vibration Suppression of a Flexible Beam via Sliding Mode and Hinfinity Control,' to be presented in IEEE Conference on Decision and Control and European Control Conference (CDC-ECC05) to be held in Seville, Spain, on December 12-15
13 Jean, S., Ahn, H. J. and Han, D. c., 2002, 'Model Validation and Controller Design for Vibration Suppression of Flexible Rotor Using AMB,' KSME International Journal, Vol. 16, No. 12, pp. 1583-1593   과학기술학회마을
14 Petersen, I. R. and Pota H. R., 2003, 'Minimax LQG Optimal Control of a Flexible System,' Control Engineering Practice, Vol. 11, pp. 1273-1287   DOI   ScienceOn
15 Salamci, M. U., 1999, 'Two New Switching Surface Design Techniques for Nonlinear Systems with Their Applications to Missile Control,' PhD. Thesis, Middle East Technical University
16 DeCado, R. A., Zak, S. H. and Matthews, G. P., 1988, 'Variable Structure Control of Nonlinear Multivariab1e Systems: A Tutorial,' Proceeding of IEEE, Vol. 76, No.3, pp.212-232   DOI   ScienceOn
17 Dosch, J., Leo, D. and Inmann, J., 1995, 'Modeling and Control for Vibration Suppression of a Flexible Active Structure,' Journal of Guidance, Control and Dynamics, Vol. 18, pp. 340-346   DOI   ScienceOn
18 Cavallo, A., De Maria, G. and Setola, R., 1999, 'A Stable Manifold Approach for Vibration Reduction of Flexible Systems,' Automatica, Vol. 35, pp. 1689-1696   DOI   ScienceOn
19 Choi, J. J. and Kim, J. S., 2003, 'Robust Control for Rotational Inverted Pendulums Using Output Feedback Sliding Mode Controller and Disturbance Observer,' KSME International Journal, Vol. 17, No. 10, pp. 1466-1474   과학기술학회마을
20 Choi, S. B., Cho, S. S. and Park, Y. P., 1999, 'Vibration and Position Tracking Control of Piezoceramic-Based Smart Structures via QFT,' Journal of Dynamic Systems, Measurement and Control, Vol. 121, pp.27-33   DOI   ScienceOn
21 Banks, S. P., Salamci, M. U. and Ozgoren, M. K., 1999, 'On the Global Stabilization of Nonlinear Systems via Switching Manifolds,' Turkish Journal of Electrical Engineering & Computer, Elektrik, Vol. 7, No. 1-3, pp. 1-17
22 Bailey, T. and Hubbard, J. E., 1985, 'Distributed Piezoelectric-Polymer Active Vibration Control of a Cantilever Beam,' Journal of Guidance, Control and Dynamics, Vol. 8, No.5, pp.605-611   DOI   ScienceOn