1 |
Treaster, A. L. and Yocum, A. M., 1979, 'The Calibration and Application of Five-Hole Probes,' ISA Transactions, Vol. 18, pp. 23-34
|
2 |
Lee, S. W., Park, S. W. and Lee, J. S., 2001a, 'Flow Characteristics Inside Circular Injection Holes Normally Oriented to a Crossflow: Part I - Flow Visualizations and Flow Data in the Symmetry Plane,' ASME Journal of Turbomachinery, Vol. 123, pp. 266-273
DOI
|
3 |
Lee, S. W., Joo, S. K. and Lee, J. S., 2001b, 'Flow Characteristics Inside Circular Injection Holes Normally Oriented to a Crossflow: Part II-Three-Dimensional Flow Data and Aerodynamic Loss,' ASME Journal of Turbomachinery, Vol. 123, pp.274-280
DOI
|
4 |
Lee, S. W. and Yoon, T. J., 1999, 'An Investigation of Wall-Proximity Effect Using a Typical Large-Scale Five-Hole Probe,' KSME International Journal, Vol. 13, pp.273-285
|
5 |
Ligrani, P. M., Singer, B. A. and Baun, L. R., 1989, 'Spatial Resolution and Downwash Velocity Corrections for Multiple-Hole Pressure Probe in Complex Flow,' Experiments in Fluids, Vol. 7, pp.424-426
DOI
|
6 |
Prenter, P. M., 1975, Splines and Variational Methods, Wiley-Intersciences
|
7 |
Sitaram, N., Lakshminarayana, B. and Ravindranath, A., 1981, 'Conventional Probes for the Relative Flow Measurement in a Turbomachinery Rotor Blade Passage,' ASME Journal of Turbomachinery, Vol. 103, pp.406-414
|
8 |
Smith, A. L. and Adcock, J. B., 1986, 'Effect of Reynolds Number and Mach Number on Flow Angularity Probe Sensitivity,' NASA TM-87750
|
9 |
Anderson, J. D., Jr., 1990, Modern Compressible Flow with Historical Perspective, Series in Aeronautical and Aerospace Engineering, McGraw-Hill, p. 6
|
10 |
Coldrick, S., Ivey, P. and Wells, R., 2002, 'Considerations for Using 3D Pneumatic Probes in High Speed Axial Compressor,' ASME Paper No. GT-2002-30045
|
11 |
Lee, S. W., Lee, J. S. and Ro, S. T., 1994, 'Experimental Study on the Flow Characteristics of Streamwise Inclined Jets in Crossflow on Flat Plate,' ASME Journal of Turbomachinery, Vol. 116, pp.97-105
DOI
|
12 |
Dominy, R. G. and Hodson, H. P., 1993, 'An Investigation of Factors Influencing the Calibration of Five-Hole Probes for Three-Dimensional Flow Measurement,' ASME Journal of Turbomachinery, Vol. 115, pp. 513-519
DOI
|
13 |
Hoffmann, G. D., Rabe, D. C. and Poti, N. D., 1980, 'Flow Direction Probes from a Theoretical and Experimental Point of View,' Journal of Physics E-Scientific Instruments, Vol. 13, pp.751-760
DOI
ScienceOn
|
14 |
Koschel, W. and Pretzsch, P., 1988, 'Development and Investigation of Cone-Type Five-Hole Probes for Small Gas Turbine,' Proceedings Of 9th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascade and Turbomachines, Oxford, United Kingdom
|
15 |
Lee, S. W., Kim, Y. B. and Lee, J. S., 1997, 'Flow Characteristics and Aerodynamic Losses of Film-Cooling Jets with Compound Angle Orientations,' ASME Journal of Turbomachinery, Vol. 119, pp.310-319
DOI
|
16 |
Abernethy, R. B., Benedict, R. P. and Dowdell, R. B., 1985, 'ASME Measurement Uncertainty,' ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164
DOI
|