Browse > Article

DC Potential Drop Method for Evaluating Material Degradation  

Seok, Chang-Sung (School of Mechanical Engineering, Sungkyunkwan University)
Bae, Bong-Kook (Graduate School, School of Mechanical Engineering, Sungkyunkwan University)
Koo, Jae-Mean (School of Mechanical Engineering, Sungkyunkwan University)
Publication Information
Journal of Mechanical Science and Technology / v.18, no.8, 2004 , pp. 1368-1374 More about this Journal
Abstract
The remaining life estimation for the aged components in power plants as well as chemical plants are very important because mechanical properties of the components are degraded with in-service exposure time in high temperatures. Since it is difficult to take specimens from the operating components to evaluate mechanical properties of components, nondestructive techniques are needed to evaluate the degradation. In this study, test materials with several different degradation levels were prepared by isothermal aging heat treatment at $630^{\circ}C$. The DC potential drop method and destructive methods such as tensile and fracture toughness were used in order to evaluate the degradation of 1Cr-1Mo-0.25V steels. In this result, we can see that tensile strength and fracture toughness can be calculated from resistivity and it is possible to evaluate material degradation using DC potential drop method, non-destructive method.
Keywords
DC Potential Drop Method; Resistivity; Degradation; Four-Point Probe; Fracture Toughness; Tensile Strength;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 ASTM F43-93, 1993, 'Standard Test Methods for Resistivity of Semiconductor Materials,' Annual Book of ASTM Standard, pp. 50-56
2 ASTM F84-93, 1993, 'Standard Test Method for Measuring Resistivity of Silicon Wafers with an In-Line Four-Point Probe,' Annual Book of ASTM Standard, pp. 135-147
3 ASTM B193-87, 1992, 'Standard Test Method for Resistivity of Electrical Conductor Materials,' Annual Book of ASTM Standard, pp. 308-311
4 Shi, J. and Sun, Y., 1997, 'New Method of Calculating the Correction Factors for the Measurement of Sheet Resistivity of a Square with a Square Four-Point Probe,' Review of Scientific Instruments, Vol. 68, No. 4, pp. 1814-1817   DOI   ScienceOn
5 Yun, S., Han, C. and Wuh, D., 2002, 'A Study on the Dynamic Analysis and Control Algorithm for a Motor Driven Power Steering System,' KSME International Journal, Vol. 16 No. 2, pp. 155-164   과학기술학회마을
6 Yamashita, M., Nishii, T. and Kurihara, H., 1996, 'Resistivity Correction Factor for the Four-Point Probe Method on Cylinderical Materials,' Japanese Journal of Applied Physics, Vol. 35, pp. 1948-1953   DOI
7 Viswanathan, R. and Bruemmer, S. M., 1985, 'In-service Degradation of Toughness of Steam Turbine Rotors,' Journal of Engineering Materials and Technology, (Transactions of the ASME), Vol. 107, pp. 316-324   DOI   ScienceOn
8 Viswanathan, R. and Gehl, S., 1991, 'Method for Estimation of the Fracture Toughness of CrMo-V Rotor Steels Based on Composition, Journal of Engineering Materials and Technology, (Transactions of the ASME), Vol. 113, pp. 263-270   DOI
9 Uhlir, A., Jr., 1955, 'The Potentials of Infinite Systems of Sources and Numerical Solutions of Problems in Semiconductor Engineering', B.S.T.J., 34, Jan., pp. 105
10 Valdes, A. B., 1954, 'Resistivity Measurements on Germanium for Transistors,' Proceedings of the IRE, pp. 420-427   DOI   ScienceOn
11 Smits, F. M., 1958, 'Measurement of Sheet Resistivities with the Four Point Probe,' The Bell System Tech. Journal, Vol. 37, pp. 711-718   DOI
12 Nham, S. H. and Kim, A. K., 1998, 'Nondestructive Evaluation of Toughness Degradation of 1Cr-1Mo-0.25V Steel Using Electrical Resistivity,' Transaction of KSME A, Vol. 22, No. 5, pp. 814-820
13 Abdel-Latif, A. M., Corbett, S. M. and Taplin, D. M. R., 1982, 'Analysis of Carbides Formed During Accelerated Aging of 2.25Cr-1Mo Steel,' Metal Science, Vol. 16, pp. 90-96   DOI
14 Seok, C. S, Kim, D. J. and Bae, B. K., 2000, 'Evaluation of Material Degradation Using Electrical Resistivity Method,' Transaction of KSME A, Vol. 24, No. 12, pp. 2992-3002   과학기술학회마을
15 Logan, M. A., 1967, 'Sheet Resistivity Measurements on Rectangular Surfaces-General Solution for Four Point Probe Conversion Factors,' The Bell System Tech. Journal, pp. 2277-2322
16 Abdel-Latif, A. M., Corbett, J. M., Sidey, D. and Taplin, D. M. R., 1981, 'Effects of Micro-sturctural Degradation on Creep Life Prediction of 2-1/4Cr-1Mo Steel,' Advanced in Fracture Research, (Proc. Of 5th Int. Conf. On Fracture (ICF5)), Vol. 4, pp. 1613-1620
17 Jeong, H, Nahm, S., Jhang, K. Y. and Nam, Y. H. 2002, 'Evaluation of Fracture Toughness Degradation of CrMoV Rotor Steels Based on Ultrasonic Nonlinearity Measurements,' KSME International Journal, Vol. 16 No. 2, pp. 147-154   과학기술학회마을