Browse > Article

System Modeling and Robust Control of an AMB Spindle : Part II A Robust Controller Design and its Implementation  

Ahn, Hyeong-Joon (Department of Mechanical & Aerospace Engineering, University of Virginia)
Han, Dong-Chul (School of Mechanical & Aerospace Engineering, Seoul National University)
Publication Information
Journal of Mechanical Science and Technology / v.17, no.12, 2003 , pp. 1855-1866 More about this Journal
Abstract
This paper discusses an entire procedure for a robust controller design and its implementation of an AMB (active magnetic bearing) spindle, which is part II of the papers presenting details of system modeling and robust control of an AMB spindle. Since there are various uncertainties in an AMB system and reliability is the most important factor for applications, robust control naturally gains attentions in this field. However, tight evaluations of various uncertainties based on experimental data and appropriate performance weightings for an AMB spindle are still ongoing research topics. In addition, there are few publications on experimental justification of a designed robust controller. In this paper, uncertainties for the AMB spindle are classified and described based on the measurement and identification results of part I, and an appropriate performance weighting scheme for the AMB spindle is developed. Then, a robust control is designed through the mixed ${\mu}$ synthesis based on the validated accurate nominal model of part I, and the robust controller is reduced considering its closed loop performance. The reduced robust controller is implemented and confirmed with measurements of closed-loop responses. The AMB spindle is operated up to 57,600 rpm and performance of the designed controller is compared with a benchmark PID controller through experiments. Experiments show that the robust controller offers higher stiffness and more efficient control of rigid modes than the benchmark PID controller.
Keywords
Robust Control; Uncertainty Description and Active Magnetic Bearing;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Ahn, H. J., Jeon, S. and Han, D. c., 2000, 'Error Analysis of the Cylindrical Capacitive Sensor for Active Magnetic Bearing Spindles,' J. of Dynamics systems, measurement, and control, trans. of ASME, March, Vol. 122, pp. 102-107   DOI   ScienceOn
2 Balas, G. J., Doyle, J. C., Glover, K., Packard, A. K. and Smith, R., ${\mu}$- Analysis and Synthesis toolbox, the MathWorks, Natick, MA, 1995
3 Doyle, J., Packard, A. and Zhou, K., 1991, 'Review of LFTs, LMIs, and ${\mu}$,' Proceedings of the 30th Conference on Decision and Control, Brington, England
4 Balas, G. J. and Young, P. M., 1995, 'Control Design for Variations in Structural Natural Frequencies,' Journal of Guidance, Control and Dynamics, Vol. 18, No.2, pp. 325-332   DOI   ScienceOn
5 Carrere, F., Font, S. and Due, G., 1994, '$H_{\infty}$ Control Design of Flexible Rotor Magnetic Bearing System,' Proceedings of the 4th ISMB, Zurich, Switzerland, pp. 65-71
6 Cui, W. M. and Nonami, K., 1992, '$H_{\infty}$ Control of Flexible Rotor-Magnetic Bearing Systems,' Proceedings of the 3rd ISMB, Alexandria, Virginia, USA, pp. 504-514
7 Fittro, R. L., 1998, 'A High Speed Machining Spindle with Active Magnetic Bearings: Control Theory, Design, and Application,' Ph. D. dissertation, University of Virginia, USA
8 Innovative Integration Co., 1998, M44 DSP Hardware manual, USA
9 Jeon, S., Ahn, H. J., Chang, I. B. and Han, D. C., 2001, 'A New Design of Cylindrical Capacitive Sensor for On-line Precision Control of AMB Spindle,' IEEE Transactions on Instrumentation and measurement, Vol. 50, No.3, pp.757-763   DOI   ScienceOn
10 Jeon, S., Ahn, H. J. and Han, D. C., 2003, 'Control of Flexible Rotor with Active Magnetic Bearing System,' KSME International Journal, 16(12), pp. 1583-1593
11 Kim, S. J. and Lee, C. W., 1998, 'On-line Identification of Position and Current Stiffnesses in Active Magnetic Bearing System Equipped with Built-in Force Transducers by LMS Algorithm,' Transactions of KSME A., 22(12), pp.2261-2268
12 Losch, F., Gahler, C. and Herzog, R., 1998, '${\mu}$-Synthesis Controller Design For a 3MW Pump Running In AMBs,' Proceedings of the 6th ISMB, MIT, Massachusetts, USA, pp.415-428
13 Van Den Braembussche, P., 1998, 'Robust Motion Control of High Performance Machine Tools with Linear Motors,' Ph. D. dissertation, Katholieke Universiteit Leuven, Belgium
14 Namerikawa, T., Fugita, M. and Matsumura, F., 1998, 'Uncertainty Structure and ${\mu}$-Design of a Magnetic Suspension System,' Proceedingsof the 6th ISMB, MIT, Boston, MA, USA, pp. 439-447
15 Young, P. M., 1996, 'Controller Design with Real Parametric Uncertainty,' International Journal of Control, Vol. 65, No.3, pp. 469-509   DOI   ScienceOn
16 Nonami, K., Ueyama, H. and Yutaka, S., 1994, '$H_{\infty}$ Control of Milling AMB Spindle,' Proceedings of the 4th ISMB, Zurich, Switzerland, pp. 531 - 536
17 Nonami, K., Takayuki, I., 1994, '${\mu}$ Synthesis of Flexible Rotor Magnetic Bearing Systems,' Proceedings of the 4th ISMB, Zurich, Switzerland, pp. 73-78
18 Stephens, L. S., 1995, 'Design and Control of Active Magnetic Bearings for a High Speed Machining Spindle,' Ph. D. dissertation, University of Virginia, USA
19 Schonhoff, U., Luo, J., Li, G., Hilton, E., Nordmann, R. and Allaire, P. E., 2000, 'Implementation Results of ${\mu}$-Synthesis Control for an Energy Storage Flywheel Test Rig,' Proceedings of the 7th ISMB, Zurich, Switzerland, pp.317-322
20 Texas Instruments Co., 1995, TMS 320C4x User's Guide, USA
21 Wortelboer, P. M. R., 1994, 'Frequency-weighted Balanced Reduction of Closed-loop Mechanical Servo- systems: Theory and Tools,' Ph. D. dissertation, Delft University of Technology, Nederland