Browse > Article

Fatigue Properties of Copper Foil and the Evolution of Surface Roughness  

Oh, Chung-Seog (School of Mechanical Engineering, Kumoh National Institute of Technology)
Bae, Jong-Sung (School of Mechanical Engineering, Kumoh National Institute of Technology)
Lee, Hak-Joo (Nano-Mechanical Research Division, Korea Institute of Mechinery and Materials)
Publication Information
International Journal of Precision Engineering and Manufacturing / v.9, no.4, 2008 , pp. 57-62 More about this Journal
Abstract
The aim of this investigation was to extract the fatigue properties at the designated fatigue life of copper foil and observe the mean stress and stress amplitude effects on both the fatigue life and the corresponding surface morphology. Tensile tests were performed to determine the baseline monotonic material properties of the proportional limit and ultimate tensile strength. Constant amplitude fatigue tests were carried out using a feedback-controlled fatigue testing machine. The mean stress and the stress amplitude were changed to obtain the complete nominal stress-life curves. An atomic force microscope was utilized to observe the relationship between the fatigue damage and the corresponding changes in surface morphology. A Basquin's exponent of-0.071 was obtained through the fatigue tests. An endurance limit of 122 MPa was inferred from a Haigh diagram. The specimen surface became rougher as the number of fatigue cycles increased, and there was a close relationship between the fatigue damage and the surface roughness evolution.
Keywords
Copper foil; Fatigue; Closed-loop control; Mean stress; S-N curve; Surface roughness;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By Web Of Science : 0  (Related Records In Web of Science)
연도 인용수 순위
1 Yue, Z. F., 'Surface Roughness Evolution under Constant Amplitude Fatigue Loading using Crystal Plasticity,' Engng Fract. Mech., Vol. 72, No. 5, pp. 749-757, 2005   DOI   ScienceOn
2 'Standard Test Methods of Tension Testing of Metallic Foil,' ASTM Standards, Vol. 03.01, E345-93, ASTM, pp. 2, 2002
3 Lukas, P. and Klesnil, M., 'Cyclic Stress-Strain Response and Fatigue Life of Metals in Low Amplitude Region,' Mat. Sci. Eng., Vol. 11, No. 6, pp. 345-356, 1973   DOI   ScienceOn
4 Fritz, T., Cho, H. S., Hemker, K. J., Mokwa, W. and Schnakenberg, U., 'Characterization of Electroplated Nickel,' Microsystem technologies: sensors, actuators, systems integration, Vol. 9, No. 1/2, pp. 87-91, 2002
5 Park, J.-H., An, J.-H., Kim, Y.-J., Huh, Y.-H. and Lee, H.-J., 'Tensile and High Cycle Fatigue Test of Copper Thin Film,' Mat.-wiss. u. Werkstofftech., Vol. 39, No. 2, pp. 187-192, 2008   DOI   ScienceOn
6 Judelewicz, M., Kunzi, H.-U., Merk, N. and llschner, B., 'Microstructural Development during Fatigue of Copper Foils 20-100 ?m thick,' Mater. Sci. Eng. A, Vol. 186, No. 1/2, pp. 135-142, 1994   DOI
7 Read, D. T. and Dally, J. W., 'Fatigue of Microlithographically-Patterned Free-Standing Aluminum Thin Film under Axial Stresses,' J. Electronic Packaging, Vol. 117, No. 1, pp. 1-5, 1995   DOI   ScienceOn
8 Hong, S. and Weil, R., 'Low Cycle Fatigue of Thin Copper Foils,' Thin Solid Films, Vol. 283, No. 1/2, pp. 175-181, 1996   DOI
9 Casado, J. A., Gutierrez-Solana, F., Polanco, J. A. and Carrascal, I., 'The Assessment of Fatigue Damage on Short-Fiber-Glass Reinforced Polyamides (PA) through the Surface Roughness Evolution,' Polym. Compos., Vol. 27, No. 4, pp. 349-359, 2006   DOI   ScienceOn
10 Bagdahn, J. and Sharpe, W. N., 'Fatigue of Polycrystalline Silicon under Long-term Cyclic Loading,' Sens. Actuators, Vol. A103, No. 1/2, pp. 9-15, 2003
11 Bannantine, J. A., Corner, J. J. and Handrock, J. L., 'Fundamentals of Metal Fatigue Analysis,' Prentice Hall, pp. 1-10 & 59-66, 1990
12 Sharma, V. S, Dhiman, S., Sehgal, R. and Sharma, K., 'Assessment and Optimization of Cutting Parameters while Turning AISI 52100 Steel,' Int. J. Precision Engineering and Manufacturing, Vol. 9, No. 2, pp. 54-62, 2008   과학기술학회마을
13 'Standard Test Methods for Determining Average Grain Size,' ASTM, Vol. 03.01, E112-96, pp. 4-14, 2002
14 Han, S.-W., Seo, K.-J., Kim, W.-D., Lee, H.-J., Lee, H.-W., Shin, J.-H. and Lee., J.-J., 'Fatigue Behavior of Thin Cu Foils for Flexible Printed Circuit Board,' Solid State Phenomena, Vol. 124-126, pp. 1369-1372, 2007   DOI
15 Zhang, G. P., Sun, K. H., Zhang, B., Gong, J., Sun, C. and Wang, Z. G., 'Tensile and Fatigue Strength of Ultrathin Copper Films,' Mat. Sci. & Engng., Vol. A483-484, pp. 387-390, 2008
16 Read, D. T., 'Tension-tension Fatigue of Copper Thin Films,' Int. J. Fatigue, Vol. 20, No. 3, pp. 203-209, 1998   DOI   ScienceOn
17 'Standard Test Methods for Tension Testing of Metallic Materials,' ASTM, Vol. 03.01, E8M-00, pp. 19, 2002
18 Kim, S.-W., Oh, C.-S. and Lee, H.-J., 'Specimen Aligning Techniques in Tensile and Fatigue Tests for Thin Films,' Fatigue Fract. Engng Mater. Struct., Vol. 30, No. 1, pp. 64-71, 2007   DOI   ScienceOn
19 'Semiconductor Devices - Micro-electromechanical Devices - Part 3: Thin Film Standard Test Piece for Tensile Testing,' IEC 62047-3 Ed. 1.0, 2006