Browse > Article

Assessment and Optimization of Cutting Parameters while Turning AISI 52100 Steel  

Sharma, Vishal S. (Department of Industrial Engineering, National Institute of Technology, Jalandhar)
Dhiman, Suresh (Department of Mechanical Engineering, National Institute of Technology, Hamirpur)
Sehgal, Rakesh (Department of Mechanical Engineering, National Institute of Technology, Hamirpur)
Sharma, Surinder Kumar (Department of Mechanical Engineering, National Institute of Technology, Kurukshetra)
Publication Information
International Journal of Precision Engineering and Manufacturing / v.9, no.2, 2008 , pp. 54-62 More about this Journal
Abstract
This investigation deals with machining AISI 52100 steel using a carbide-coated tool. The machining cutting force and tool tip temperature are measured online while turning using different cutting parameters. The surface roughness is also measured, but off-line after each cut. The obtained data are analyzed and the influence of the cutting parameters on the machining variables is determined in the form of plots. Regression models obtained from the results are tested using additional experimental data.
Keywords
Cutting forces; Tool tip temperature; Surface roughness;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
Times Cited By Web Of Science : 5  (Related Records In Web of Science)
Times Cited By SCOPUS : 3
연도 인용수 순위
1 Heo, S. J., "Machining Characteristics of Cemented Carbides in Micro Cutting within SEM," International Journal of Precision Engineering and Manufacturing, Vol. 5, No. 3, pp. 35-42, 2004
2 Kalpakjian, S., "Manufacturing Engineering and Technology," Addison-Wesley Publishing Company, pp.-635, 1989
3 Chandra, M. R. G., Komaraiah, M., Kamala, V., Prashanth, J. P. and Bala, K. K., "Condition monitoring of cutting force and power in a turning operation with tool wear," Sixteenth National Convention of Mechanical Engineers and National Seminar on Future Trends in Mechanical Engineering, pp. 546-551, 2000
4 Chou, Y. K., Evans, C. J. and Barash, M. M., "Experimental investigation on cubic boron nitride turning of hardened AISI 52100 steel," Journal of Material Processing Technology, Vol. 134, Issue 1, pp. 1-9, 2003   DOI   ScienceOn
5 Kim, K. W. and Ahn, T. K., "Force Prediction and Stress Analysis of a Twist Drill from Tool Geometry and Cutting Conditions," International Journal of Precision Engineering and Manufacturing, Vol. 6, No. 1, pp. 65-72, 2005   과학기술학회마을
6 Noordin, M. Y., Venkatesh, V. C., Sharif, S., Elting, S. and Abdullah, A., "Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel," Journal of Material Processing Technology, Vol. 145, No. 1, pp. 46-58, 2004   DOI   ScienceOn
7 Liang, M., Mgwalu, M. and Zuo, M., "Integration of cutting parameters selection and tool adjustment decisions for multipass turning," International Journal of Advanced Manufacturing Technology, Vol. 17, No. 12, pp. 861-869, 2001   DOI   ScienceOn
8 Feng, C. X., "An experimental study of the impact of turning parameters on surface roughness," Proceedings of the Industrial Engineering Research Conference, No. 2036, pp. 1-7, 2001
9 Guo, Y. B. and Liu, C. R., "Mechanical properties of hardened AISI 52100 steel in hard machining processes," Journal of Manufacturing Science and Engineering, Vol. Issue 1, pp.-9, 2002
10 Miller, M. R., Mulholland, G. and Anderson, C., "Experimental cutting tool temperature distributions," Journal of Manufacturing Science and Engineering, Vol.Issue 4, pp. 667-673, 2003
11 Jung, J. W., Ko, S. H., Jeong, Y. H., Min, B. K. and Lee, S. J., "Estimation of Material Removal Volume of a Micro-EDM Drilled Hole Using Discharge Pulse Monitoring," International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 4, pp. 45-49, 2007   과학기술학회마을
12 Trent, E. M. and Wright, P.K., "Metal Cutting," Butterworth-Heinemann, pp. 9-95, 2000
13 Haci, S., Faruk, U. and Yaldiz, S., "Investigation of the effect of rake angle and approaching angle on main cutting force and tool tip temperature," International Journal of Machine Tools and Manufacture, Vol. 46, Issue 2, pp. 132-141, 2006   DOI   ScienceOn
14 Thiele, J. D. and Melkote, S. N., "Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel," Journal of Material Processing Technology, Vol. 94, Issues 2-3, pp. 216-226, 1999   DOI
15 Outeiro, J. C., Umbrello, D. and Saoubi, R. M., "Experimental and numerical modeling of the residual stresses induced in orthogonal cutting of AISI 316 L steel," International Journal of Machine Tool and Manufacturing, Vol. 46, Issue 14, pp. 1786-1794, 2006   DOI   ScienceOn