1 |
VGB Kraftwerktechnik 69, Maerz, Heft 3, pp.255-259, 1989
|
2 |
Arthur and Penman, J., 'Induction machine condition monitoring and with higher order spectra,' IEEE Trans. Industrial Electronics, Vol. 47, No. 5, pp. 1031-1041, Oct. 2000
DOI
ScienceOn
|
3 |
Hong, S. W. and Park, J. H., 'An efficient method for the unbalance response analysis of rotor-bearing systems,' Journal of Sound and Vibration, Vol. 200, No. 4, pp. 491-504, 1997
DOI
ScienceOn
|
4 |
Hoextermann, E., 'Erfahrung mit schaeden in form von anrissen und bruecken an dampfturbienenwellen, radscheiben und generatorlaufen,' VGB Technische - wissenschaftliche Berichte Waermekraftwerke, VGW-TW 107, 1988
|
5 |
Hua, Su and Chong, K. T., 'An efficient method for the mass unbalance analysis of a rotor system using FFT and Lissajous diagram,' in 2004 International Conference of Control, Automation and Systems, Bangkok, Thailand, pp.1609-1614, 2004
|
6 |
Chow, T. W. and Hai, S., 'Induction Machine Fault Diagnostic Analysis with Wavelet Technique,' IEEE Trans. on industrial electronics, Vol. 51, No. 3, pp. 558-565, 2004
DOI
ScienceOn
|
7 |
Debnth, L., 'Wavelet Transforms & Time-Frequency Signal Analysis,' Birkhauser Boston, 2001
|
8 |
Hong, S. W., Kang, J. O. and Shin, Y. C., 'Dynamic Characteristics of Indeterminate Rotor Systems with Angular Contract Ball Bearings Subject to Axial and Radial Loads,' Int. Journal of Precision Engineering and Manufacturing, Vol. 3, No. 2, pp. 61-71, 2002
|
9 |
Saito, S. and Azuma, T., 'Balancing of flexible rotors by the complex modal method,' ASME Journal of Vibration, Acoustics, Stress and Reliability in Design, Vol. 105, pp. 94-100, 1983
DOI
ScienceOn
|
10 |
Park, Rai Wung, 'Estimation of a Mass Unbalance Under the Crack on the Rotating Shaft,' ICASE., Vol. 2, No. 4, pp. 228-233, 2000
|
11 |
Shih, Y. P., Lee, A. C., 'Identification of the unbalance distribution in flexible rotors,' Int. J. Mech. Sci., Vol. 39. No. 7, pp. 841-857, 1997
DOI
ScienceOn
|
12 |
Shimada, K. and Miwa, S., 'Balancing of a flexible rotor,' Bulletin of the JSME, Vol.23, No.180, pp. 938-944, 1980
DOI
ScienceOn
|
13 |
Chernopyatov, Y.A., Lee, C.M. and Chung, W.J., 'A New Approach Increasing the Rotational Accuracy of Ball-Bearing Spindle by Using Proper Bearing Positioning,' Int. Journal of Precision Engineering and Manufacturing, Vol. 4, No.5, pp. 15-21, 2003
|
14 |
Han, H. S., Kwang, S. W. and Koo, J. S., 'Vibration Analysis of a Rotary Compressor,' Int. Journal of Precision Engineering and Manufacturing, Vol. 5, No. 3, pp. 43-53, 2004
|
15 |
Wylie, C. R. and Barrett, L. C., 'Advanced Engineering Mathematics,' McGraw-Hill, 1982
|