Browse > Article

A Study on Determination of Shear Center of Beam with Arbitrary Cross Section  

Oh, Teak-Yul (School of Mechanical and Industrial Systems Engineering, Kyunghee University)
Byun, Chang-Hwan (Graduate School of Mechanical Engineering, Kyunghee University)
Known, Young-Ha (School of Mechanical and Industrial Systems Engineering, Kyunghee University)
Publication Information
International Journal of Precision Engineering and Manufacturing / v.4, no.4, 2003 , pp. 39-44 More about this Journal
Abstract
It is important to find the shear center of beam with arbitrary cross-section in structures. In this study, it is introduced to determine the shear center that gets the equivalent stiffness matrix representing arbitrary cross section of beam and applies concepts of equivalent energy. This method shows the results of applying on examples that the exact and approximate solution of open and cross section of beam is known. The shear center of composite rotor blade by the experiment and by the suggested method was compared in this study.
Keywords
Shear Center; Equivalent Stiffness Matrix; Concept of Equivalent Energy; Arbitrary Cross Section; Reduction;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Geradin, M.. 'Error Bounds for Eigenvalue Analysis by Elimination of Variables,' Journal of Sound and Vibration, Vol. 19, pp. 111-132
2 Oh, Taek-Yul, Byun, Chang-Hwan, Yu, Young-Seok, Kwon, Young-Ha, 'A Study on Determination of Shear Center of Beam Having Arbitrary Cross Section,' KSPE Journal, Vol. 19, No. 1, pp. 93-98, 2002   과학기술학회마을
3 The MacNeal-Schwendler Corporation, MSC/NASTRAN Dynamics Seminar Notes, The MacNeal-Schwendler Corporation, pp. 4-9 - 4-11, 1992
4 Oh, Taek-Yul, Choi, Myung-Jin, Yu, Yong-Seok, Chae, Kyung-Duck, 'Determination of the Principal Directions of Composite Helicopter Rotor Blades with Arbitrary Cross Sections,' KSME International Journal, Vol. 14, No.3, pp. 291-297, 2000   DOI
5 Reissner, E., 'The Shear Center Problem for Nonlinear Material Behavior,' Transactions of the ASME, Vol. 62, pp. 822-823, 1995   DOI   ScienceOn
6 Arthur P. Boresi, Richard J. Schmidt, Omar M. Sidebottom, Advanced Mechanics of Materials, John Wiley & Sons, pp. 331-361, 1993
7 Reissner, E., 'A Note on the Shear Center Problem for Shear-Deformable Plates,' Int. J. Solids Structures, Vol. 32, No.5, pp. 679-682, 1994   DOI   ScienceOn
8 Guyan, R. J., 'Reduction of Stiffness and Mass Matrices,' AIAA Journal, Vol. 3, pp. 380, 1965   DOI
9 Wright, G. C., Miles, G. A., 'An Economical Method for Determining the Smallest Eigenvalues of Large Linear Systems,' International Journal for Numerical Methods in Engineering, Vol. 3, pp. 25-33   DOI
10 Wondle, R., 'Calculation of the Cross Section Properties and Shear Stress of Composite Rotor Blade,' Vertica, Vol. 6, 1982
11 Joo, J., 'An Experimental Study on the Dynamic Characteristics of a Hingeless Rotor in Hover,' Ph. D. Dissertation, Dept. of Aerospace Engineering, Seoul National University, 1993
12 Irons, B. M., 'Structural Eigenvalue Problems ; elimination of Unwanted Variables,' AIAA Journal, Vol. 3, pp. 961-962, 1965
13 Kosmatka, J. B., 'General Behavior and Shear Center Location of Prismatic Anisotropic Beams via Power Series,' Int. J. Solids Structures, Vol. 31, No. 3 pp. 417-439,1994   DOI   ScienceOn