Browse > Article

Sliding Wear Characteristics of plasma Sprayed $8\%Y_{2}O_3-ZrO_2$ Coating for Post-spray Heat Treatment  

Chae Young-Hun (Engineering Tribology Research Institute, Kyungpook National University)
Kim Seock-Sam (Department of Mechanical Engineering, Kyungpook National University)
Publication Information
KSTLE International Journal / v.6, no.2, 2005 , pp. 45-50 More about this Journal
Abstract
Plasma ceramic spray that is applied on a machine part under severe work conditions has been investigated for tribological behavior. The application of ceramic coatings by plasma spray has become essential in tribosystems to produce wear resistance and long life in severe conditions. The purpose of this study was to investigate the wear characteristics of $8\%Y_{2}O_3-ZrO_2$ coating, in view of the effect of post-spay heat treatment. The plasma-sprayed $8\%Y_{2}O_3-ZrO_2$ coating was studied to know the relationship between phase transformations and wear behavior related to post-spray heat treatment. Wear test was carried out with ball on disk type on normal loads of 50N,70N and 90N under room temperature. The phase transformation of phase and the value of residual stress were measured by X-ray diffraction method(XRD). Tribological characteristics and wear mechanisms of coatings were observed by SEM. The tribological wear performance was discussed in the focusing of residual stress. Consequently, post-spray heat treatment plays an important role in decreasing residual stress. Residual stress in the coating system has a significant influence on the wear mechanism of coating.
Keywords
Friction; wear; plasma spray coating; XRD;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 B. Wang, Z. Shui and A. Levy, Sliding wear of thermallysprayed chromia coatings, Wear, 138(1990), pp. 93-110   DOI   ScienceOn
2 Y.H. Chae and S.S. Kim, Evaluation of wear characteristics for $Al_2O_3-40%TiO_2$ sprayed on casted aluminum alloy, J of the KSTLE(Korea), vol. 15(1999), pp. 183   과학기술학회마을
3 H.S. Ahn, J.Y. Kim and D.S. Lim, Tribological behaviour of plasma sprayed ceramic coating for the application to the cylinder liner in engines, Korea Soc. Automotive Eng., 1(1993), pp.89-102   과학기술학회마을
4 H.S. Ahn and O.K. Kwon, Wear behaviour of plasma-sprayed partially stabilized zirconia on a steel substrate, Wear 162-164(1993), pp. 636-644   DOI   ScienceOn
5 A. Levy and S. Macadam, The behavior of ceramic thermal barrier coatings on diesel engine combustion zone components, Surface Coating s Technology, 30(1987), pp. 51-61   DOI   ScienceOn
6 Y.H. Chae and S.S. Kim, Sliding wear behavior of ceramic plasma sprayed on casting aluminum alloy against SiC ball, Tribology letters, vol. 8(2000), pp. 35   DOI   ScienceOn
7 Y. Wang, Y. Jin and S. Wen, The analysis of the chemical structure and properties of ceramic surface films in friction using SEM, AES and Micro-region X-ray diffraction, Wear, vol. 128(1988), pp. 277   DOI   ScienceOn
8 S.J. Bull, R. Kingswell and K.T. Scott, The sliding wear of plasma sprayed alumina, Surface Coatings Technology, 82(1996), pp. 218   DOI   ScienceOn
9 Y.H. Chae and S.S. Kim, Tribological performance of $Al_2O_3$/NiCr coating, International J. of KSME, (2001), pp   과학기술학회마을
10 J.Y. Kim, D.S. Lim and H.S. Ahn, High temperature wear of plasma sprayed $ZrO_2-Y_2O_3$ coatings, J. Korea Ceram. Soc., 30(1993), pp.1059-1065   과학기술학회마을
11 U. Wiklund, J. Gunnars, S. Hogmark, Influence of residual stresses on fracture and delamination of thin hard coatings, Wear, 232(1999), pp.262-269   DOI   ScienceOn
12 Y. Wang, Y. Jin and S. Wen, The analysis of the friction and wear mechanisms of plasma-sprayed ceramic coating at $450^{\circ}C$, Wear 128(1988), pp.265-276   DOI   ScienceOn
13 T. Sato, S. Ohtaki and M. Shimada, Transformation of yttriapartially stabilized zirconia by low-temperature annealing in Air, J. Material Science, 20(1985), pp.1466-1470   DOI   ScienceOn