Phosphogypsum purification for plaster production: A process optimization using full factorial design |
Moalla, Raida
(Laboratory 3E, Sfax National School of Engineers, University of Sfax)
Gargouri, Manel (National Agency for Promotion of Scientific Research) Khmiri, Foued (Tunisian Chemical Group Research Directorate) Kamoun, Lotfi (Tunisian Chemical Group Research Directorate) Zairi, Moncef (Laboratory 3E, Sfax National School of Engineers, University of Sfax) |
1 | El Afifi EM, Hilal MA, Attallah MF, EL-Reefy SA. Characterization of phosphogypsum wastes associated with phosphoric acid and fertilizers production. J. Environ. Radioact. 2009;100:407-412. |
2 | Kuryatnyk T, Angulski da Luz C, Ambroise J, Pera J. Valorization of phosphogypsum as hydraulic binder. J. Hazard. Mater. 2008;160:681-687. DOI |
3 | Hassen S, Anna Z, Elaloui EE, Belgacem MN, Mauret E. Study of the valorization of phosphogypsum in the region of Gafsa as filler in paper. IOP Conf. Ser.: Mater. Sci. Eng. 2012;28: 012018. DOI |
4 | Hammas I, Horchani-Naifer K, Ferid M. Characterization and optical study of phosphogypsum industrial waste. Stud. Chem. Process Technol. (SCPT) 2013;1:30-36. |
5 | Yang J, Liu W, Zhang L, Xiao B. Preparation of load-bearing building materials from autoclaved phosphogypsum. Constr. Build. Mater. 2009;23:687-693. |
6 | Ajam L, Ouezdou MB, Felfoul HS, El Mensi R. Characterization of the Tunisian phosphogypsum and its valorization in clay bricks. Constr. Build. Mater. 2009;23:3240-3247. DOI |
7 | Rutherford PM, Dudas MJ, Samek RA. Environmental impacts of phosphogypsum: A review. Sci. Total Environ. 1994;149:1-38. DOI |
8 | Zairi M, Rouis MJ. Impacts environnementaux du stockage du phosphogypse a Sfax (Tunisie). BLPC. 1999;219:29-40. |
9 | Tayibi H, Choura M, Lopez FA, Alguacil, FJ, Lopez-Delgado A. Environmental impact and management of phosphogypsum. J. Environ. Manage. 2009;90:2377-2386. DOI |
10 | Taher MA. Influence of thermally treated phosphogypsum on the properties of Portland slag cement. Resour. Conserv. Recy. 2007;52:28-38. DOI |
11 | Parreira, AB, Kobayashi ARK, Silvestre Jr OB. Influence of Portland cement type on unconfined compressive strength and linear expansion of cement-stabilized phosphogypsum. J. Environ. Eng. 2003;129:956-960. DOI |
12 | Zhoua J, Gaob H, Shub Z, Wangb Y, Yan C. Utilization of waste phosphogypsum to prepare non-fired bricks by a novel Hydration-Recrystallization process. Constr. Build. Mater. 2012;34:114-119. |
13 | Potgieter JH, Potgieter SS, McCrindle RI, Strydom CA. An investigation into the effect of various chemical and physical treatments of a South African phosphogypsum to render it suitable as a set retarder for cement. Cement Concrete Res. 2003;33:1223-1227. DOI |
14 | Smadi MM, Haddad RH, Akour AM. Potential use of phosphogypsum in concrete. Cement Concrete Res. 1999;29:1419-1425. |
15 | Manjit S, Garg M. Making of anhydrite cement from waste gypsum. Cement Concrete Res. 2000;4:571-577. |
16 | Manjit S, Garg M. Production of beneficiated phosphogypsum for cement manufacture. J. Sci. Ind. Res. 2002;61:533-537. |
17 | Altun IA, Sert Y. Utilization of weathered phosphogypsum as set retarder in Portland cement. Cement Concrete Res. 2004;34:677-680. DOI |
18 | Sfar Felfoul H. Etude du phosphogypse de Sfax (Tunisie) en vue d'une valorisation en technique routiere [dissertation]. Department of Civil Engineering. National Engineering School of Tunis/INSA Toulouse; 2004. |
19 | Degirmenci N, Okucu A, Turabi A. Application of phosphogypsum in soil stabilization. Build. Environ. 2007;42:3393-3398. DOI |
20 | Ahmadi BH. Use of high strength by product gypsum bricks in masonry construction. [dissertation]. Florida, USA: Univ. of Miami, Coral Gables; 1989. |
21 | Kumar SA. Perspective study on fly ash-lime-gypsum bricks and hollow blocks for low cost housing development. Constr. Build. Mater. 2002;16:519-525. |
22 | Valipour M. Study of different climatic conditions to assess the role of solar radiation in reference crop evapotranspiration equations. Arch. Agron. Soil Sci. 2015;61:679-694. DOI |
23 | Sadhukhan S, Sarkar U. Production of biodiesel from Crotalaria juncea (Sunn-Hemp) oil using catalytic trans-esterification: Process optimisation using a factorial and Box- Behnken design. Waste Biomass Valori. 2016;7:343-355. DOI |
24 | Bingol D, Tekin N, Alkan M. Brilliant Yellow dye adsorption onto sepiolite using a full factorial design. Appl. Clay Sci. 2010;50:315-321. DOI |
25 | Valipour M, Banihabib ME, Behbahani SMR. Comparison of the ARMA, ARIMA, and the autoregressive artificial neural network models in forecasting the monthly inflow of Dez dam reservoir. J. Hydrol. 2013;476:433-441. DOI |
26 | Valipour M. How much meteorological information is necessary to achieve reliable accuracy for rainfall estimations. Agriculture 2016;6:53. DOI |
27 | Valipour M. Global experience on irrigation management under different scenarios. J. Water Land Dev. 2017;32:95-102. |
28 | Valipour M. Variations of land use and irrigation for next decades under different scenarios. Irriga: Braz. J. Irrig. Drain. 2016;1:262-288. |
29 | Valipour M, Sefidkouhi MAG, Sarjaz MR. Selecting the best model to estimate potential evapotranspiration with respect to climate change and magnitudes of extreme events. Agr. Water Manage. 2017;180:50-60. DOI |
30 | Manjit S. Treating waste phosphogypsum for cement and plaster manufacture. Cement Concrete Res. 2002;32:1033-1038. DOI |
31 | Hammas-Nasri I, Horchani-Naifer K, Ferid M. Rare earths concentration from phosphogypsum waste by two-step leaching method. Int. J. Miner. Process. 2016;149:78-83. DOI |
32 | Jarosinski A, Kowalczyk J, Mazanek C. Development of the Polish wasteless technology of apatite phosphogypsum utilization with recovery of rare-earths. J. Alloy. Compd. 1993;200:147-150. DOI |
33 | Van der Merwe EM, Strydom CA. Purification of South African PG for use as Portland cement retarder by a combined thermal and sulphuric acid treatment method. S. Afr. J. Sci. 2004;100:411-414. |
34 | Lokshin EP, Tareeva OA, Elizarova IR. On integrated processing of phosphogypsum. Russ. J. Appl. Chem. 2013;86:463-468. |
35 | Lokshin EP, Tareeva OA. Production of high-quality gypsum raw materials from phosphogypsum. Russ. J. Appl. Chem. 2015;88:567-573. DOI |
36 | Yi XS, Shi WX, Yu SL, Li XH, Sun N, He C. Factorial design applied to flux decline of anionic polyacrylamide removal from water by modified polyvinylidene fluoride ultrafiltration membranes. Desalination 2011;274:7-12. DOI |
37 | Nejad SJ, Abolghasemia H, Moosaviana MA, Maraghehb MG. Fractional factorial design for the optimization of supercritical carbon dioxide extraction of , and ions from a solid matrix using bis (2,4,4-trimethylpentyl) dithiophosphinic acid + tributylphosphate. Chem. Eng. Res. Des. 2011; 8:827-835. |
38 | Aliedeh MA, Jarrah NA. Application of full factorial design to optimize phosphogypsum beneficiation process ( Reduction) by using sulfuric and nitric acid solutions. Sixth Jordanian International Chemical Engineering Conference, Amman, Jordan. March 2012. |
39 | Kandil AHT, Cheira MF, Gado HS, Soliman MH, Akl HM. Ammonium Sulfate preparation from phosphogypsum waste. J. Radiat. Res. Appl. Sci. 2017;10:24-33. DOI |
40 | Velickovic AV, Stamenkovic OS, Todorovic ZB, Veljkovic VB. Application of the full factorial design to optimization of base-catalyzed sunflower oil ethanolysis. Fuel 2013;104: 433-442. DOI |
41 | Pey CM, Maestro A, Sole I, Gonzalez C, Solans C, Gutierrez JM. Optimization of nano-emulsions prepared by low-energy emulsification methods at constant temperature using a factorial design study. Colloid. Surface. A. 2006;288:144-150. DOI |
42 | StatPoint Inc. Statgraphics Centurion XVI user manual. United States of America 2005. |
43 | Heiderscheidt E, Leiviska T, Klove B. Chemical treatment response to variations in non-point pollution water quality: Results of a factorial design experiment. J. Environ. Manage. 2015;150:164-172. DOI |
44 | Shahabadi MSS, Reyhani A. Optimization of operating conditions in ultrafiltration process for produced water treatment via the full factorial design methodology. Sep. Purif. Technol. 2014;132:50-61. DOI |
45 | Zhou G, Fu L, Li X. Optimisation of ultrasound-assisted extraction conditions for maximal recovery of active monacolins and removal of toxic citrinin from red yeast rice by a full factorial design coupled with response surface methodology. Food Chem. 2015;170:186-192. DOI |
46 | Onsekizoglua P, Bahcecib KS, Acara J. The use of factorial design for modeling membrane distillation. J. Membrane Sci. 2010;349:225-230. DOI |
47 | Ajam L. Valorisation du phosphogypse dans la brique cuite Cas des terrils de Sfax (Tunisie) [Doctorate Thesis]. Tunisia : Univ. of Tunis El Manar; 2010. |
48 | Shah M, Pathak K. Development and statistical optimization of solid lipid nanoparticles of simvastatin by using full-factorial design. AAPS PharmSciTech 2009;11:489-496. |
49 | Figueroa RAR, Cassano A, Drioli E. Ultrafiltration of orange press liquor: optimization for permeate flux and fouling index by response surface methodology. Sep. Sci. Technol. 2011;80: 1-10. |
50 | IS. 12679-1989. Specification for by-product gypsum for use in plaster, blocks and boards. Bureau of Indian Standards, New Delhi; 1989. |
51 | NF EN 13279-1. Liants-platres et enduits a base de platre pour le batiment - Partie 1 : definitions et exigences 2008 [in French]. |
52 | El-Didamony H, Ali MM, Awwad NS, Fawzy MM, Attallah MF. Treatment of phosphogypsum waste using suitable organic extractants. J. Radioanal. Nucl. Chem. 2012;291:907-914. DOI |
53 | EURATOM. Council Directive 96/26 EC. European Atomic Commission; 1996. |
54 | NF EN 13279-2. Liants-platres et enduits a base de platre pour le batiment - Partie 2 : methodes d'essai 2004 [in French]. |
55 | Reijnders L. Cleaner phosphogypsum, coal combustion ashes and waste incineration ashes for application in building materials: A review. Build. Environ. 2007;42:1036-1042. DOI |