[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.17703/IJACT.2015.3.2.124

Effect of Twisted - Tape Tubulators on Heat Transfer and Flow Friction inside a Double Pipe Heat Exchanger

Phitakwinai, Sutida (Rajamangala University of Technology Suvarnabhumi)
Nilnont, Wanich (Rajamangala University of Technology Suvarnabhumi)
Thawichsri, Kosart (Siam Technology College)

Publication Information

International Journal of Advanced Culture Technology / v.3, no.2, 2015 , pp. 124-131 More about this Journal

Abstract

Computational fluid dynamics (CFD) has been employed for the Heat exchanger efficiency of a counter flow heat exchanger. The Heat exchanger efficiency has been assessed by considering the computed Nusselt number and flow friction characteristics in the double pipes heat exchanger equipped with two types twisted-tapes: (1) single clockwise direction and (2) alternate clockwise and counterclockwise direction. Cold and hot water are used as working fluids in shell and tube side, respectively. Hot and cold water inlet mass flow rates ranging are between 0.04 and 0.25 kg/s, and 0.166 kg/s, respectively. The inlet hot and cold water temperatures are 54 and $30^{\circ}C$ , respectively. The results obtained from the tube with twisted-tapes insert are compared with plain tube. Nusselt number and friction factor obtained by CFD simulations were compared with correlations available in the literature. The numerical results were found in good agreement with the results reported in literature.

Keywords

CFD; Twisted-tape; Double pipe Heat Exchanger; Heat exchanger efficiency;

Citations & Related Records

Reference

1	Liao, Q. and Xin, M. D. 2000. Augmentation of convective heat transfer inside tubes with threedimensional internal extended surfaces and twisted-tape inserts. Chemical Engineering Journal. Vol. 78. No. 2-3. pp. 95-105. DOI
2	Ray, S. and Date, A.W. 2001. Laminar flow and heat transfer through square duct with twisted tape insert. Int. J. Heat and Fluid Flow. Vol. 22, No. 4, pp. 460-472. DOI
3	Lokanath, M. S. and Misal, R. D. 2002. An experimental study on the performance of plate heat exchanger and an augmented shell and tube heat exchanger for different types of fluids for marine applications. Proceedings of 5th ISHMT-ASME Heat and Mass Transfer Conference. pp. 863-868 (Tata McGraw-Hill, New Delhi). India.
4	Wang, L. and Sunden, B. 2002. Performance comparison of some tube inserts. Int. Comm. Heat Mass Transfer. Vol. 29. No. 1. pp. 45-56. DOI
5	Naphon, P. 2006. Heat transfer and pressure drop in the horizontal double pipes with and without twisted tape insert. Int. Comm. Heat and Mass Transfer. Vol. 33. No. 2. pp. 166-175. DOI
6	Eiamsa-ard, S., Thianpong, C., Eiamsa-ard, P. and Promvonge, P. 2009. Convective heat transfer in a circular tube with short-length twisted tape insert. Int. Comm. Heat and Mass Transfer. Vol. 36. No. 4. pp. 365-371. DOI
7	Seemawute, P. and Eiamsa-ard, S. 2010. Thermohydraulics of turbulent flow through a round tube by a peripherally-cut twisted tape with an alternate axis. Int. Comm. Heat and Mass Transfer. Vol. 37. No. 6. pp. 652-659. DOI
8	Ozisik, M.N. 1985. Heat Transfer. Mc-Graw-Hill.
9	Bhuiya, M.M.K., Chowdhury, M.S.U., Saha, M. and Islam, M.T. 2013. Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts. Int. Comm. Heat and Mass Transfer. Vol. 46. pp. 49-57. DOI