Browse > Article

Effect of polymer cement modifiers on mechanical and physical properties of polymer-modified mortar using recycled artificial marble waste fine aggregate  

Hwang, Eui-Hwan (Department of Chemical Engineering, Kongju National University)
Ko, Young-Soo (Department of Chemical Engineering, Kongju National University)
Jeon, Jong-Ki (Department of Chemical Engineering, Kongju National University)
Publication Information
Journal of Industrial and Engineering Chemistry / v.14, no.2, 2008 , pp. 265-271 More about this Journal
Abstract
Various polymer-modified mortars using recycled artificial marble waste fine aggregate (AMWFA) were prepared and investigated for the purpose of feasibility of recycling. Styrene-butadiene rubber (SBR) latex and polyacrylic ester (PAE) emulsion were employed as polymer modifier, and compared each other. The replacement ratio of AMWFA was also changed to investigate the effect of it on physical properties. Adding polymer cement modifier into mortar reduced water-cement ratio, and PAE was the more effective polymer cement modifier to reduce water-cement ratio than SBR. PAE emulsion-modified mortar increased the air content entrained as the proportion of PAE was increased. There was little difference in water absorption between SBR latex and PAE emulsion. The compressive strength decreased in the presence of polymer cement modifiers compared to that of no polymer cement modifiers, but the compressive strength of 20% of polymer-cement ratio was higher than that of 10%. After the hot water resistance test, both compressive strength and flexural strength were decreased. (C) 2007 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.
Keywords
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
Times Cited By Web Of Science : 12  (Related Records In Web of Science)
Times Cited By SCOPUS : 17
연도 인용수 순위
1 W. Kaminsky, J.S. kim, J. Anal. Appl. Pyrol. 51 (1999) 127   DOI   ScienceOn
2 Y.K. Yang, T.S. Hwang, S.M. Kim, N.S. Kwak, E.H. Hwang, J. Korean Ind. Eng. Chem. 15 (2004) 786
3 C.G. Lee, S.H. Kang, J.S. Kim, J.S. Yun, Y. Kang, M.J. Choi, J. Korean Ind. Eng. Chem. 15 (2004) 188
4 E.H. Hwang, D.S. Kil, J.Y. Shin, T.S. Hwang, S.H. Yang, in: N. Laksmanan, C.V. Vaidyanathan, Y. Ohama, M. Neelamegam (Eds.), Proceedings of the Fifth Asian Symposium on Polymers in Concrete, Chennai, India, (2006), p. 323
5 E.H. Hwang, D.S. Kil, T.S. Hwang, J. Korean Ind. Eng. Chem. 11 (2000) 792
6 E.H. Hwang, T.S. Hwang, D.S. Kil, J. Korean Ind. Eng. Chem. 10 (1999) 1066
7 D.W. Fowler, G.W. Depuy, in: D. Van Gemert, K.U. Leuven (Eds.), Proceedings of the Eighth International Symposium on Polymers in Concrete, Oostende, Belgium, (1995), p. 67
8 E.H. Hwang, T.S. Hwang, E. Kamada, J. Korean Ceramic Society 31 (1994) 949
9 R.N. Swamy, H. Nagao, in: D. Van Gemert, K.U. Leuven (Eds.), Proceedings of the Eighth International Symposium on Polymers in Concrete, Oostende, Belgium, (1995), pp. 257-262
10 Y. Ohama, M. Miyake, in: D. Van Gemert, K.U. Leuven (Eds.), Proceedings of the Eighth International Symposium on Polymers in Concrete, Oostende, Belgium, (1995), p. 331
11 Y.N. Chun, S.I. Kim, J. Ind. Eng. Chem. 12 (2006) 552
12 Y. Ohama, N.W. Choi, in: Mortars, Asphalt, Ferreira, Fernandes, Marques (Eds.), Proceedings of the International Conference on Polymer Concrete, University of Porto, Portugal, (2002), p. 161
13 E.H. Hwang, T.S. Hwang, Y. Ohama, J. Korean Ind. Eng. Chem. 5 (1994) 786
14 Y.K. Jo, Y. Ohama, K. Demura, in: K.S. yeon, J.D. Choi (Eds.), Proceedings of the First Asian Symposium on Polymers in Concrete, Chuncheon, Korea, (1994), p. 231
15 H.K. Lee, H.S. Kim, J. Korean Ind. Eng. Chem. 14 (2003) 622
16 E.H. Hwang, Y.S. Ko, J.K. Jeon, J. Ind. Eng. Chem. 13 (2007) 387
17 Y. Ohama, in: N. Laksmanan, C.V. Vaidyanathan, Y. Ohama, M. Neelamegam (Eds.), Proceedings of the Fifth Asian Symposium on Polymers in Concrete, Chennai, India, (2006), p. 3
18 M.J.P. Slapak, J.M.N. van Kasteren, A.A.H. Drinkenburg, Resour. Conserv. Recycling (2000) 81
19 E.H. Hwang, D.S. Kil, I.S. Oh, J. Korean Ind. Eng. Chem. 8 (1997) 979
20 E. Sakai, J. Sugita, Cement Concrete Res. 25 (1995) 127   DOI   ScienceOn
21 N.F.O. Evbuomwan, in: H. Yiun-Yuan, W. Keru, C. Zhiyuan (Eds.), Proceedings of the Sixth International Symposium on Polymers in Concrete, Shanghai, China, (1990), p. 52
22 H.S. Park, C.G. Kim, S.J. Kim, J. Ind. Eng. Chem. 12 (2006) 216
23 Y. Ohama, Concrete Admixtures Handbook, Noyes Publication, New Jersey, 1984, p. 337
24 E.H. Hwang, D.S. Kil, B.K. Lee, B.J. Lee, J. Korea Soc.Waste Manage. 19 (2002) 553
25 Hashimoto, Y. Ohama, The International of the College of Engineering of Nihon University, Series A, 19, 1987, p. 113
26 W.T. Kuo, K.L. Lin,W.C. Chang, H.L. Luo, J. Ind. Eng. Chem. 12 (2006) 702
27 H.T. Kim, S.C. Oh, J. Ind. Eng. Chem. 11 (2005) 648
28 J.H. Lee, H.G. Kim, J.S. Shin, C.H. Kang, J. Korean Ind. Eng. Chem. 13 (2002) 588
29 Y. Ohama, K. Shiroishida, SP-89, American Concrete Institute, 1985,, p. 313
30 E.H. Hwang, T.S. Hwang, J. Ind. Eng. Chem. 13 (2007) 585
31 Y. Ohama, in: Franco Sandrolini (Ed.), Proceedings of the Nineth International Symposium on Polymers in Concrete, Bologna, Italy, (1998), p. 1
32 K. Demura, Y. Ohama, T. Satoh, in: Proceedings of the International RILEM Workshop on Disposal and Recycling of Organic and Polymeric Construction Materials, E and FN Spon, London, (1995), p. 169
33 R.N. Swamy, in: D. Van Gemert, K.U. Leuven (Eds.), Proceedings of the Eighth International Symposium on Polymers in Concrete, Oostende, Belgium, (1995), p. 21
34 E. Semerad, P. Kremnitzer, W. Lacom, F. Holub, P. Sattler, in: B.W. Staynes (Ed.), Proceedings of the Fifth International Symposium on Polymers in Concrete, Brighton, England, (1987), p. 223
35 W.I. Kim, H.j. Kim, I.K. Hong, J. Korean Ind. Eng. Chem. 11 (2000) 220
36 K.S. Yeon, in: N. Laksmanan, C.V. Vaidyanathan, Y. Ohama, M. Neelamegam (Eds.), Proceedings of the Fifth Asian Symposium on Polymers in Concrete, Chennai, India, (2006), p. 13