Browse > Article

Quick and Accurate Computation of Voltage Stability Margin  

Karbalaei, Farid (Faculty of Electrical Engineering, Shahid Rajaee Teacher Training University (SRTTU))
Abasi, Shahriar (Electrical Engineering Department, Faculty of Engineering, Razi University)
Publication Information
Journal of Electrical Engineering and Technology / v.11, no.1, 2016 , pp. 1-8 More about this Journal
Abstract
It is well known that the behavior of PV curves is similar to a quadratic function. This is used in some papers to approximate PV curves and calculate the maximum-loading point by minimum number of power flow runs. This paper also based on quadratic approximation of the PV curves is aimed at completing previous works so that the computational efforts are reduced and the accuracy is maintained. To do this, an iterative method based on a quadratic function with two constant coefficients, instead of the three ones, is used. This simplifies the calculation of the quadratic function. In each iteration, to prevent the calculations from diverging, the equations are solved on the assumption that voltage magnitude at a selected load bus is known and the loading factor is unknown instead. The voltage magnitude except in the first iteration is selected equal to the one at the nose point of the latest approximated PV curve. A method is presented to put the mentioned voltage in the first iteration as close as possible to the collapse point voltage. This reduces the number of iterations needed to determine the maximum-loading point. This method is tested on four IEEE test systems.
Keywords
Quadratic approximation; Voltage collapse; Voltage stability margin; Collapse point voltage;
Citations & Related Records
연도 인용수 순위
  • Reference
1 G. Verbic and F. Gubina, “Fast voltage-collapse line-protection algorithm based on local phasors”, IEE Proc. Gener.Transm.Distrib., vol. 150, no. 4, pp. 482-486, July 2003.   DOI
2 M. Parniani and M. Vanouni, “A fast local index for online estimation of closeness to loadability limit”, IEEE Trans. Power Systems, vol. 25, no. 1, pp. 584-585, Feb. 2010.   DOI
3 G. K. Morison, B. Gao and P. Kundur, “Voltage stability analysis using static and dynamic approaches”, IEEE Trans. Power Systems, vol. 8, no. 3, pp. 1159-1171, Aug. 1993.   DOI
4 B. Gao, G. K. Morison and P. Kundur, “Voltage stability evaluation using modal analysis”, IEEE Trans. Power Systems, vol. 7, no. 4, pp. 1529-1541, Nov. 1992.   DOI
5 A. Berizzi, P. Finazzi, D. Dosi, P. Marannino and S. Corsi, “First and second order methods for voltage collapse assessment and security enhancement”, IEEE Trans. Power Systems, vol. 13, no. 2, pp. 543-551, May 1998.   DOI
6 P. A. Lof, T. Smed, G. Andersson and D. J. Hill, “Fast calculation of a voltage stability index”, IEEE Trans. Power Systems, vol. 7, no. 1, pp. 54-64, Feb. 1992.
7 P. Kessel and H. Glavitsch, “Estimating the voltage stability of a power system”, IEEE Trans. Power Delivery, vol.PWRD-1, no. 3, pp. 346-354, July 1986.
8 CY. Lee, SH. Tsai and YK. Wu, “A new approach to the assessment of steady-state voltage stability margins using the P-Q-V curve”, Int. J. Electrical Power and Energy Systems, vol. 32, pp. 1091-1098, 2010.   DOI
9 W. Xu, I. R. Pordanjani, Y. Wang and E. Vaahedi, “A network decoupling transform for phasor data based voltage stability analysis and monitoring”, IEEE Trans. Smart Grid, vol. 3, no. 1, pp. 261-270, March. 2012.   DOI
10 I. Dobson and L. Lu, “New method for computing a closest saddle node bifurcation and worst case load power margin for voltage collapse”, IEEE Trans. Power Systems, vol. 8, no. 3, pp. 905-913, Aug. 1993.
11 F. Alvarado, I. Dobson and Y. Hu, “Computation of closest bifurcations in power systems”, IEEE Trans. Power Systems, vol. 9, no. 2, pp. 918-928, May. 1994.   DOI
12 N. Flatabo, O. B. Fosso, R. Ognedal, T. Carlson and K.R. Heggland, “A method for calculation of margins to voltage instability applied on the Norwegian system for maintaining required security level”, IEEE Trans. Power Systems, vol. 8, no. 3, pp. 920-928, Aug. 1993.   DOI
13 C. Lemaltre, J. P. Paul, J. M. Tesseron, Y. Harmand and Y. S. Zhao, “An indicator of the risk of voltage profile instability for real-time control applications”, IEEE Trans. Power Systems, vol. 5, no. 1, pp. 154-161, Feb. 1990.   DOI
14 A.C.Z. de Souza, C.A. Canizares and V.H. Quintana, “New techniques to speed up voltage collapse computations using tangent vectors”, IEEE Trans. Power Systems, vol. 12, no. 3, pp. 1380-1387, Aug. 1997.   DOI
15 L. A. Li. Zarate and C. A. Castro, “Fast computation of security margins to voltage collapse based on sensitivity analysis”, IEE Proc.-Gener. Transm. Distrib., vol. 153, no. 1, pp. 35-43, Jan. 2006.   DOI
16 V. Ajjarapu, C. Christy, “The continuation power flow: a tool for stead state voltage stability analysis”, IEEE Trans. Power Systems, vol. 7, no. 1, pp. 416- 423, Feb. 1992.
17 A. Pama and G. Radman, “A new approach for estimating voltage collapse point based on quadratic approximation of PV-curves”, Int. J. Electric Power Systems Research, vol.79, pp.653-659, April 2009.   DOI
18 T. V. Cutsem and C. Vournas, “Voltage stability of electric power systems”, (Kluwer Academic, 1998).