Browse > Article
http://dx.doi.org/10.5370/JEET.2015.10.1.408

PMSM Servo Drive for V-Belt Continuously Variable Transmission System Using Hybrid Recurrent Chebyshev NN Control System  

Lin, Chih-Hong (Dept. of Electrical Engineering, National United University)
Publication Information
Journal of Electrical Engineering and Technology / v.10, no.1, 2015 , pp. 408-421 More about this Journal
Abstract
Because the wheel of V-belt continuously variable transmission (CVT) system driven by permanent magnet synchronous motor (PMSM) has much unknown nonlinear and time-varying characteristics, the better control performance design for the linear control design is a time consuming job. In order to overcome difficulties for design of the linear controllers, a hybrid recurrent Chebyshev neural network (NN) control system is proposed to control for a PMSM servo-driven V-belt CVT system under the occurrence of the lumped nonlinear load disturbances. The hybrid recurrent Chebyshev NN control system consists of an inspector control, a recurrent Chebyshev NN control with adaptive law and a recouped control. Moreover, the online parameters tuning methodology of adaptive law in the recurrent Chebyshev NN can be derived according to the Lyapunov stability theorem and the gradient descent method. Furthermore, the optimal learning rate of the parameters based on discrete-type Lyapunov function is derived to achieve fast convergence. The recurrent Chebyshev NN with fast convergence has the online learning ability to respond to the system's nonlinear and time-varying behaviors. Finally, to show the effectiveness of the proposed control scheme, comparative studies are demonstrated by experimental results.
Keywords
Permanent magnet synchronous motor; V-belt continuously variable transmission; Chebshev neural nework; Lyapunov stability;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Namatame and N. Ueda, “Pattern classification with Chebyshev neural networks,” Int. J. Neural Networks, 3 (1), pp. 23-31, 1992.
2 T.T. Lee and J. T. Jeng, “The Chebyshev polynomial-based unified model neural networks for functional approximation,” IEEE Trans. System, Man and Cybernetics B, vol. 28, no. 6, pp. 925-935, Dec. 1998.   DOI   ScienceOn
3 R. Grino, G. Cembrano, and C. Torras, “Nonlinear system identification using additive dynamic neural networks − two on-line approaches,” IEEE Trans. Circuits and Systems I, vol. 47, no. 2, pp. 150-165, Feb. 2000.   DOI   ScienceOn
4 C. Y. Tseng, L. W. Chen, Y. T. Lin and J. Y. Li, “A hybrid dynamic simulation model for urban scooters with a mechanical-type CVT,” in IEEE Int. Conf. Automation and Logistics, 2008, pp. 519-519.
5 C. Y. Tseng, Y. F. Lue, Y. T. Lin, J. C. Siao, C. H. Tsai and L. M. Fu, “Dynamic simulation model for hybrid electric scooters,” in IEEE Int. Symp. Industrial Electronics, 2009, pp. 1464-1469.
6 L. Guzzella and A. M. Schmid, “Feedback linearization of spark-ignition engines with continuously variable transmissions,” IEEE Trans. Contr. Syst. Technol., vol. 3, no. 1, pp. 54-58, Mar. 1995.   DOI   ScienceOn
7 W. Kim and G. Vachtsevanos, “Fuzzy logic ratio control for a CVT hydraulic module,” in Proc. IEEE Symp. Intelligent Control, 2000, pp. 151–156.
8 D. W. Novotny and T. A. Lipo, Vector Control and Dynamics of AC Drives, NY: Oxford University Press, 1996.
9 W. Leonhard, Control of Electrical Drives, Berlin: Springer-Verlag, 1996.
10 F.J. Lin, “Real-time IP position controller design with torque feedforward control for PM synchronous motor,” IEEE Trans. Industrial Electronics, vol. 4, no. 2, pp. 398-407, Mar. 1997.
11 S. Haykin, Neural Networks, Ottawa, ON, Canada: Maxwell Macmillan, 1994.
12 P. S. Sastry, G. Santharam, and K. P. Unnikrishnan, “Memory neural networks for identification and control of dynamical systems,” IEEE Trans. Neural Networks, vol. 5, no. 2, pp. 306-319, Mar. 1994.   DOI   ScienceOn
13 C. H. Lin and C. P. Lin, “The hybrid RFNN control for a PMSM drive system using rotor flux estimator,” Int. J. Power Electronics, vol. 4, no. 1, pp. 33-48, 2012.   DOI
14 C. H. Lin, P. H. Chiang, C. S. Tseng, Y. L. Lin, and M. Y. Lee, “Hybrid recurrent fuzzy neural network control for permanent magnet synchronous motor applied in electric scooter,” in 6th Int. Power Electronics Conference, 2010, pp. 1371-1376.
15 C. H. Lin, “Hybrid recurrent wavelet neural network control of PMSM servo-drive system for electric scooter,” Int. J. Automatic Control Systems, vol. 12, no. 1, pp. 177-187, Feb. 2014.   DOI   ScienceOn
16 K. J. Astrom and T. Hagglund, PID Controller: Theory, Design, and Tuning, North Carolina: Instrument Society of America, Research Triangle Park, 1995
17 T. Hagglund and K. J. Astrom, “Revisiting the Ziegler- Nichols tuning rules for PI control,” Asian J. Control, vol. 4, no. 4, pp. 364-380, Dec. 2002.
18 T. Hagglund and K.J. Astrom, “Revisiting the Ziegler-Nichols tuning rules for PI control — part II: the frequency response method,” Asian J. Control, vol. 6, no. 4, pp. 469-482, Dec. 2004.
19 J. J. E. Slotine and W. Li, Applied Nonlinear Control, Englewood Cliffs, NJ: Prentice-Hall, 1991.
20 K. J. Astrom and B. Wittenmark, Adaptive Control, NY: Addison-Wesley, 1995.
21 F. Payam, M. N. Hashemnia, J. Faiz, “Robust DTC control of doubly-fed induction machines based on input-output feedback linearization using recurrent neural networks,” J. Power Electronics, vol. 11, no. 5, pp. 719-725, Sep. 2011.   DOI   ScienceOn
22 C. Charalambous, “Conjugate gradient algorithm for efficient training of artificial neural networks,” Proc. Inst. Electric Engineering G, vol. 139, no. 3, pp. 301-310, June 1992.
23 M. T. Hagan and M. B. Menhaj, “Training feedforward networks with Marquardt algorithm,” IEEE Trans. Neural Networks, vol. 5, no. 6, pp. 989-993, Nov. 1994.   DOI   ScienceOn
24 R.K. Madyastha and B. Aazhang, “An algorithm for training multilayer perceptrons for data classifycation and function interpolation,” IEEE Trans. Circuits and Systems I, vol. 41, no. 12, pp. 866-875, Dec. 1994.   DOI   ScienceOn
25 T. W. S. Chow and Y. Fang, “A recurrent neuralnetwork-based real-time learning control strategy applying to nonlinear systems with unknown dynamics,” IEEE Trans. Industrial Electronics, vol. 45, no. 1, pp. 151-161, Feb. 1998.   DOI   ScienceOn
26 R. Battiti, “First- and second-order methods for learning: Between steepest descent and Newton’s method,” Neural Computation, vol. 4, no. 2, pp. 141-166, Mar. 1992.   DOI
27 M. A. Brdys and G. J. Kulawski, “Dynamic neural controllers for induction motor,” IEEE Trans. Neural Networks, vol. 10, no. 2, pp. 340-355, Mar. 1999.   DOI   ScienceOn
28 X.D. Li, J.K.L. Ho, and T.W.S. Chow, “Approximation of dynamical time-variant systems by continuoustime recurrent neural networks,” IEEE Trans. Circuits and Systems II, vol. 52, no. 10, pp. 656-660, Oct. 2005.
29 C. H. Lu and C. C. Tsai, “Adaptive predictive control with recurrent neural network for industrial processes: an application to temperature control of a variable-frequency oil-cooling machine,” IEEE Trans. Industrial Electronics, vol. 55, no. 3, pp. 1366-1375, Mar. 2008.   DOI
30 W. Huang, S. K. Oh, and H. Zhang, “Multiobjective space search optimization and information granulation in the design of fuzzy radial basis function neural networks,” J. Elect. Eng. Technol., vol. 7, no. 4, pp. 636-645, July 2012.   DOI   ScienceOn
31 K. S. Narendra and K. Parthasarathy, “Identification and control of dynamical systems using neural networks,” IEEE Trans. Neural Networks, vol. 1, no. 1, pp. 4-26, Mar. 1990.   DOI
32 D. H. Nguyen and B. Widrow, “Neural networks for self-learning control system,” IEEE Control System Magazine, vol. 10, no. 3, pp.18-23, Apr. 1990.   DOI   ScienceOn
33 M. N. Eskander, “Minimization of losses in permanent magnet synchronous motors using neural network,” J. Power Electronics, vol. 2, no. 3, pp. 220-229, July 2002.
34 M. F. Moller, “A scaled conjugate gradient algorithm for fast supervised learning,” Neural Networks, vol. 6, no. 4, pp. 525-533, 1993.   DOI   ScienceOn
35 D. Q. Dang, N. T. T. Vu, H. H. Choi, and J. W. Jung, “Neuro-fuzzy control of interior permanent magnet synchronous motors: stability analysis and implementation,” J. Elect. Eng. Technol., vol. 8, no. 6, pp. 1439-1450, Nov. 2013.   DOI   ScienceOn