1 |
Yao, W., & Zheng, X. (2007). Effect of mix proportion on coefficient of thermal expansion of concrete. Tongji Daxue Xuebao/Journal of Tongji University, 35(1), 77-81 + 87.
|
2 |
Zhang, W., Qian, H., Sun, Q., & Chen, Y. (2015). Experimental study of the effect of high temperature on primary wave velocity and microstructure of limestone. Environmental Earth Sciences, 74(7), 5739-5748.
DOI
|
3 |
ASTM. (2014). Standard test method for static modulus of elasticity and Poisson's ratio of concrete in compression. West Conshohocken, PA: American Society of Testing Materials (ASTM). ASTM C469/C469M-14.
|
4 |
Behnood, A., & Ghandehari, M. (2009). Comparison of compressive and splitting tensile strength of high-strength concrete with and without polypropylene fibers heated to high temperatures. Fire Safety Journal, 44(8), 1015-1022.
DOI
|
5 |
ASTM. (2015). Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate. West Conshohocken, PA: American Society of Testing Materials (ASTM). ASTM C127-15.
|
6 |
ASTM. (2015). Standard test method for density, relative density (specific gravity), and absorption of fine aggregate. West Conshohocken, PA: American Society of Testing Materials (ASTM). ASTM C128-15.
|
7 |
ASTM. (2015). Standard test method for slump of hydraulic-cement concrete. West Conshohocken, PA: American Society for Testing of Materials (ASTM). ASTM C143/C143M-15.
|
8 |
Behnood, A., & Ziari, H. (2008). Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures. Cement & Concrete Composites, 30(2), 106-112.
DOI
|
9 |
Bentz, D. P. (2007). Transient plane source measurements of the thermal properties of hydrating cement pastes. Materials and Structures, 40(10), 1073-1080.
DOI
|
10 |
Bentz, D. P., Peltz, M. A., Duran-Herrera, A., Valdez, P., & Juarez, C. A. (2011). Thermal properties of high-volume fly ash mortars and concretes. Journal of Building Physics, 34(3), 263-275.
DOI
|
11 |
Brown, W. L. (1989). Alkali feldspars: Ordering rates, phase transformations and behaviour diagrams for igneous rocks. Mineralogical Magazine, 53(369), 25-42.
DOI
|
12 |
EN. (1992). Design of concrete structures. Part 1-2: General rules-structural fire design. Brussels, Belgium: European Standards (EN).
|
13 |
Chen, L.-J., He, J., Chao, J.-Q.,&Qin, B.-D. (2009). Swelling and breaking characteristics of limestone under high temperatures. Mining Science and Technology (China), 19(4), 503-507.
DOI
|
14 |
Cheng, F., Kodur, V., & Wang, T. (2004). Stress-strain curves for high strength concrete at elevated temperatures. Journal of Materials in Civil Engineering, 16(1), 84-90.
DOI
|
15 |
Cruz, C. R., & Gillen, M. (1980). Thermal expansion of Portland cement paste, mortar and concrete at high temperatures. Fire and Materials, 4(2), 66-70.
DOI
|
16 |
Ghandehari, M., Behnood, A., & Khanzadi, M. (2009). Residual mechanical properties of high-strength concretes after exposure to elevated temperatures. Journal of Materials in Civil Engineering, 22(1), 59-64.
DOI
|
17 |
Gluekler, E. L. (1979). Local thermal and structural behavior of concrete at elevated temperatures. 5th international conference on structural mechanics in reactor technology Berlin: International Association.
|
18 |
Goldsmith, J. R. (1980). The melting and breakdown reactions of anorthite at high pressures and temperatures. American Mineralogist, 65, 272-284.
|
19 |
Hager, I. (2013). Behaviour of cement concrete at high temperature. Bulletin of the Polish Academy of Sciences: Technical Sciences, 61, 145.
DOI
|
20 |
Heikal, M. (2000). Effect of temperature on the physico-mechanical and mineralogical properties of homra pozzolanic cement pastes. Cement and Concrete Research, 30(11), 1835-1839.
DOI
|
21 |
Husem, M. (2006). The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete. Fire Safety Journal, 41(2), 155-163.
DOI
|
22 |
Naus, D. (2010). In: D. J. Naus (Ed.), A compilation of elevated temperature concrete material property data and information for use in assessments of nuclear power plant reinforced concrete structures. U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research. Report no: NUREG/CR-7031, Washington, DC.
|
23 |
Abrams, M. S. (1971). Compressive strength of concrete at temperatures to 1600F. ACI Special Publication, 25, 33-58.
|
24 |
ACI. (2014). Building code requirements for structural concrete (ACI 318-14) and commentary (ACI 318-14R). American Concrete Institute (ACI): Farmington Hills, MI.
|
25 |
Akhavan, A. C. (2005). The quartz page. Retrieved 07/24, 2016. http://www.quartzpage.de/gen_mod.html.
|
26 |
Koksal, F., Gencel, O., Brostow, W., & Lobland, H. E. H. (2012). Effect of high temperature on mechanical and physical properties of lightweight cement based refractory including expanded vermiculite. Materials Research Innovations, 16(1), 7-13.
DOI
|
27 |
Li, H., & Liu, G. (2016). Tensile properties of hybrid fiberreinforced reactive powder concrete after exposure to elevated temperatures. International Journal of Concrete Structures and Materials, 10(1), 29-37.
DOI
|
28 |
Pancar, E. B., & Akpinar, M. V. (2016). Temperature reduction of concrete pavement using glass bead materials. International Journal of Concrete Structures and Materials, 10(1), 39-46.
DOI
|
29 |
Peng, G.-F., & Huang, Z.-S. (2008). Change in microstructure of hardened cement paste subjected to elevated temperatures. Construction and Building Materials, 22(4), 593-599.
DOI
|
30 |
Plevova, E., Vaculikova, L., Kozusnikova, A., Ritz, M., & Simha Martynkova, G. (2016). Thermal expansion behaviour of granites. Journal of Thermal Analysis and Calorimetry, 123(2), 1555-1561.
DOI
|
31 |
Poon, C.-S., Azhar, S., Anson, M., & Wong, Y.-L. (2001). Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures. Cement and Concrete Research, 31(9), 1291-1300.
DOI
|
32 |
Rodriguez-Navarro, C., Ruiz-Agudo, E., Luque, A., Rodriguez-Navarro, A. B., & Ortega-Huertas, M. (2009). Thermal decomposition of calcite: Mechanisms of formation and textural evolution of CaO nanocrystals. American Mineralogist, 94, 578-593.
DOI
|
33 |
ASTM. (2013). Standard test method for surface moisture in fine aggregate. West Conshohocken, PA: American Society of Testing Materials (ASTM). ASTM C70-13.
|
34 |
Ali, F., Nadjai, A., Silcock, G., & Abu-Tair, A. (2004). Outcomes of a major research on fire resistance of concrete columns. Fire Safety Journal, 39(6), 433-445.
DOI
|
35 |
Arioz, O. (2007). Effects of elevated temperatures on properties of concrete. Fire Safety Journal, 42(8), 516-522.
DOI
|
36 |
ASTM. (2009). Standard test method for bulk density ("Unit Weight") and voids in aggregate. West Conshohocken, PA: American Society for Testing of Materials (ASTM). C29/C29M-09.
|
37 |
ASTM. (2011). Standard test method for splitting tensile strength of cylindrical concrete specimens. West Conshohocken, PA: American Society of Testing Materials (ASTM). ASTM C496-11.
|
38 |
ASTM. (2013). Standard specification for concrete aggregates. West Conshohocken, PA: American Society for Testing of Materials (ASTM). C33/C33M-13.
|
39 |
ASTM. (2013). Standard test method for total evaporable moisture content of aggregate by dryin. West Conshohocken, PA: American Society of Testing Materials (ASTM). ASTM C566-13.
|
40 |
ASTM. (2014). Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA: American Society of Testing Materials (ASTM). ASTM C39/C39M-14.
|
41 |
ASTM. (2014). Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine. West Conshohocken, PA: American Society for Testing and Materials (ASTM). C131/C131M-14.
|
42 |
ASTM. (2014). Standard test method for sieve analysis of fine and coarse aggregates. West Conshohocken, PA: American Society for Testing of Materials (ASTM). ASTM C136/C136M-14.
|
43 |
Wenk, H. R., & Bulakh, A. (2004). Minerals: Their constitution and origin. Cambridge: Cambridge University Press.
|
44 |
Sakr, K., & El-Hakim, E. (2005). Effect of high temperature or fire on heavy weight concrete properties. Cement and Concrete Research, 35(3), 590-596.
DOI
|
45 |
Savva, A., Manita, P., & Sideris, K. K. (2005). Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates. Cement&Concrete Composites, 27(2), 239-248.
DOI
|
46 |
Uygunoglu, T., & Topcu I. B. (2012). Effect of aggregate type on linear thermal expansion of self-consolidating concrete at elevated temperatures. Science and Engineering of Composite Materials, 19(3), 259.
|