Browse > Article
http://dx.doi.org/10.1007/s40069-015-0110-y

Automated Surface Wave Measurements for Evaluating the Depth of Surface-Breaking Cracks in Concrete  

Kee, Seong-Hoon (Department of Architectural Engineering, Dong-A University)
Nam, Boohyun (Department of Civil, Environmental and Construction Engineering, University of Central Florida)
Publication Information
International Journal of Concrete Structures and Materials / v.9, no.3, 2015 , pp. 307-321 More about this Journal
Abstract
The primary objective of this study is to investigate the feasibility of an innovative surface-mount sensor, made of a piezoelectric disc (PZT sensor), as a consistent source for surface wave velocity and transmission measurements in concrete structures. To this end, one concrete slab with lateral dimensions of 1500 by 1500 mm and a thickness of 200 mm was prepared in the laboratory. The concrete slab had a notch-type, surface-breaking crack at its center, with depths increasing from 0 to 100 mm at stepwise intervals of 10 mm. A PZT sensor was attached to the concrete surface and used to generate incident surface waves for surface wave measurements. Two accelerometers were used to measure the surface waves. Signals generated by the PZT sensors show a broad bandwidth with a center frequency around 40 kHz, and very good signal consistency in the frequency range from 0 to 100 kHz. Furthermore, repeatability of the surface wave velocity and transmission measurements is significantly improved compared to that obtained using manual impact sources. In addition, the PZT sensors are demonstrated to be effective for monitoring an actual surface-breaking crack in a concrete beam specimen subjected to various external loadings (compressive and flexural loading with stepwise increases). The findings in this study demonstrate that the surface mount sensor has great potential as a consistent source for surface wave velocity and transmission measurements for automated health monitoring of concrete structures.
Keywords
surface waves; surface wave transmission; surface-breaking crack; concrete; non-destructive evaluation;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Achenbach, J. D. (2000). Quantitative nondestructive evaluation. International Journal of Solids and Structures, 37(1-2), 13-27.   DOI
2 Achenbach, J. D. (2002). Modeling for quantitative non-destructive evaluation. Ultrasonics, 40(1-8), 1-10.   DOI
3 Achenbach, J. D., Keer, L. M., & Mendelsohn, D. A. (1980). Elastodynamic analysis of an edge crack. Journal of Applied Mechanics, 47(3), 551-556.   DOI
4 ACI Committee 228 (1998). Nondestructive test methods for evaluation of concrete in structures. Report ACI 228.2R-98, American Concrete Institute, Farmington Hills, MI.
5 Angel, Y. C., & Achenbach, J. D. (1984). Reflection and transmission of obliquely incident Rayleigh waves by a surface-breaking crack. The Journal of the Acoustical Society of America, 75(2), 313-319.   DOI
6 ASTM C39. (2014). Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken: ASTM International.
7 Dong, B., Xing, F., & Li, Z. (2011). Cement-based piezoelectric ceramic composite and its seosor applications in civil engineeriing. ACI Materials Journal, 108(5), 543-549.
8 ElSafty, A., & Abdel-Mohti, A. (2013). Investigation of likelihood of cracking in reinforced concrete bridge decks. International Journal of Concrete Structures and Materials, 7(1), 79-93.   DOI
9 Graff, K. (1991). Wave motion in elastic solid. New York: Dover Publications.
10 Gucunski, N., Imani, A., Romero, F., Nazarian. S., Yuan, D., Wiggenhauser, H., et al. (2013). Nondestructive testig to identify concrete bridge deck deterioration. SHRP 2 Report S2-R06A-RR-1.
11 Hevin, G., Abraham, O., Petersen, H. A., & Campillo, M. (1998). Characterization of surface cracks with Rayleigh waves: A numerical model. NDT and E International, 31(4), 289-298.   DOI
12 Hou, S., Zhang, H. B., & Ou, J. P. (2012). A PZT-based smart aggregate for compressive seismic stress monitoring. Smart Materials and Structures, 21, 105035.   DOI
13 Kee, S.-H., & Zhu, J. (2010). Using air-coupled sensors to determine the depth of a surface-breaking crack in concrete. The Journal of the Acoustical Society of America, 127(3), 1279-1287.   DOI
14 Hou, S., Zhang, H. B., & Ou, J. P. (2013). A PZT-based smart aggregate for seismic shear stress monitoring. Smart Materials and Structures, 22, 065012.   DOI
15 Jung, M. J. (2005). Shear wave velocity measurements of normally consolidated kaolinite using bender elements. Master of Science in Engineering, The University of Texas at Austin, Austin.
16 Kee, S.-H. (2011). Evaluation of crack-depth in concrete using non-contact surface wave transmission measurement. Doctor of Philosophy, The University of Texas at Austin, Austin, TX.
17 Kee, S.-H., & Zhu, J. (2011). Effects of sensor locations on aircoupled surface wave transmission measurements. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 58(2), 427-436.   DOI
18 Kee, S.-H., & Zhu, J. (2013). Using piezoelectric sensors for ultrasonic pulse velocity measurements in concrete. Smart Materials and Structures, 22(11), 115016.   DOI
19 Liao, W. I., Wang, J. X., Song, G., Gu, H., Olmi, C., Mo, Y. L., et al. (2011). Structural health monitoring of concrete columns subjected to seismic excitations using piezoceramic-based sensors. Smart Materials and Structures, 20(12), 125015.   DOI
20 Masserey, B., & Mazza, E. (2007). Ultrasonic sizing of short surface cracks. Ultrasonics, 46(3), 195-204.   DOI
21 McLaskey, G. C., & Glaser, S. D. (2010). Hertzian impact: Experimental study of the force pulse and resulting stress waves. Journal of the Acoustical Society of America, 128(3), 1087-1096.   DOI
22 Okafor, A. C., Chandrashekhara, K., & Jiang, Y. P. (1996). Delamination prediction in composite beams with built-in piezoelectric devices using modal analysis and neural network. Smart Materials and Structures, 5(3), 338-347.   DOI
23 Mendelsohn, D. A., Achenbach, J. D., & Keer, L. M. (1980). Scattering of elastic waves by a surface-breaking crack. Wave Motion, 2(3), 277-292.   DOI
24 Nazarian, S., & Desai, M. R. (1993). Automated surface wave method: Filed testing. Journal of Geotechnical Engineering, ASCE, 119(7), 1094-1111.   DOI
25 Nazarian, S., & Stokoe, K. H., II (1986). In-situ determination of elastic moduli of pavement systems by spectral-analysisof-surface-wave method (practical aspects). Research Report 368-1F, University of Texas at Austin, Center for Transportation Research.
26 Popovics, J. S., Song, W.-J., Ghandehari, M., Subramaniam, K. V., Achenbach, J. D., & Shah, S. P. (2000). Application of surface wave transmission measurements for crack depth determination in concrete. ACI Materials Journal, 97(2), 127-135.
27 Shin, S. W., Zhu, J., Min, J., & Popovics, J. S. (2008). Crack depth estimation in concrete using energy transmission of surface waves. ACI Materials Journal, 105(5), 510-516.
28 Soltani, A., Harries, K. A., & Shahrooz, B. M. (2013). Crack opening behavior of concrete reinforced with high strength reinforcing steel. International Journal of Concrete Structures and Materials, 7(4), 253-264.   DOI
29 Song, G. B., Gu, H. C., & Mo, Y. L. (2008). Smart aggregates: multi-functional sensors for concrete structures-a tutorial and a review. Smart Materials and Structures, 17(3), 033001.   DOI
30 Song, G., Gu, H., Mo, Y. L., Hsu, T. T. C., & Dhonde, H. (2007). Concrete structural health monitoring using embedded piezoceramic transducers.’’. Smart Materials and Structures, 16(4), 959-968.   DOI
31 Song, G., Mo, Y. L., Otero, K., & Gu, H. (2006). Health monitoring and rehabilitation of a concrete structure using intelligent materials. Smart Materrials & Structures, 15(2), 309-314.   DOI
32 Song, W.-J., Popovics, J. S., Aldrin, J. C., & Shah, S. P. (2003). Measurement of surface wave transmission coefficient across surface-breaking cracks and notches in concrete. The Journal of the Acoustical Society of America, 113(2), 717-725.   DOI
33 Wang, C. S., Wu, F., & Chang, F. K. (2001). Structural health monitoring from fiber-reinforced composites to steel reinforced concrete. Smart Materials and Structures, 10(3), 548-552.   DOI