1 |
Kowalsky, M. J., Priestley, M. J. N., & MacRae, G. A. (1995). Displacement-based design of RC bridge columns in seismic regions. Journal of Earthquake Engineering and Structural Dynamics, 24(12), 1623-1643.
DOI
|
2 |
Maheri, M. R., & Ghaffarzadeh, H. (2008). Connection overstrength in steel-braced RC frames. Journal of Engineering Structures, 30, 1938-1948.
DOI
ScienceOn
|
3 |
Maheri, M. R., & Sahebi, A. (1997). Use of steel bracing in reinforced concrete frames. Engineering Structures, 19(12), 1018-1024.
DOI
ScienceOn
|
4 |
Malekpour, S., Ghaffarzadeh, H., & Dashti, F. (2012). Direct displacement-based design of steel-braced reinforced concrete frames. Journal of the Structural Design of Tall and Special Buildings. doi:10.1002/tal.1028.
|
5 |
Moehle, J. P. (1992). Displacement-based design of RC structures subjected to earthquakes. Earthquake Spectra, EERI, 8(3), 403-428.
DOI
|
6 |
Pennucci, D., Calvi, G. M., & Sullivan, T. J. (2009). Displacement-based design of precast walls with additional dampers. Journal of Earthquake Engineering, 13(1), 40-65.
DOI
|
7 |
PERFORM-3D User Guide. (2006). Nonlinear analysis and performance assessment for 3D structures, VERSION 4, August 2006. Berkeley, CA: Computers and Structures, Inc.
|
8 |
Pettinga, J. D., & Priestley, M. J. N. (2005). Dynamic behaviour of reinforced concrete frames design with direct displacement-based design. Journal of Earthquake Engineering, 9(2), 309-330.
DOI
|
9 |
Priestley, M. J. N. (2003). Myths and fallacies in earthquake engineering, revisited, The Mallet Milne Lecture. Pavia, Italy: IUSS Press.
|
10 |
Priestley, M. J. N., & Grant, D. N. (2005). Viscous damping for analysis and design. Journal of Earthquake Engineering, 9(Special Issue 2), 229-255.
DOI
|
11 |
Garcia, R., Sullivan, T. J., & Della Corte, G. (2010). Development of a displacement-based design for steel frame-RC wall buildings. Journal of Earthquake Engineering, 14(2), 252-277.
DOI
ScienceOn
|
12 |
Ghaffarzadeh, H., & Maheri, M. R. (2006a). Cyclic tests on the internally braced RC frames. Journal of Seismology and Earthquake Engineering, 8(3), 177-186.
|
13 |
Ghaffarzadeh, H., & Maheri, M. R. (2006b). Mechanical compression release device in steel bracing system for retrofitting RC frames. Journal of Earthquake Engineering and Engineering Vibration, 5(1), 151-158. doi:10.1007/s11803-006-0626-x.
DOI
|
14 |
Ghorbani-Asl, A. (2007). Performance-based seismic design of building structure. Doctor of Philosophy in Civil Engineering. Ottawa-Carleton Institute for Civil Engineering, Carleton University, Ottawa, Canada.
|
15 |
Gulkan, P., & Sozen, M. (1974). Inelastic response of reinforced concrete structures to earthquake motions. ACI Journal, 71(12), 604-610.
|
16 |
Higashi, Y., Endo, T., & Shimizu, Y. (1981). Experimental studies on retrofitting of reinforced concrete structural members. In Proceedings of the Second Seminar on Repair and Retrofit of Structures (pp. 126-155). Ann Arbor, MI:National Science Foundation.
|
17 |
Iranian Code of Practice for Seismic Resistant Design of Buildings, Standard No. 2800, 3rd edition. (2005). Building and Housing Research Center, BHRC-PN S 253.
|
18 |
Jacobsen, L. S. (1930). Steady forced vibration as influenced by damping. Transactions of ASME, 52, 169-181.
|
19 |
FEMA 356. (2002). Prestandard and commentary for the seismic rehabilitation of buildings. Washington, D.C.:Federal Emergency Management Agency.
|
20 |
Freeman, S. A. (1998). The capacity spectrum method as a tool for seismic design. In Proceedings of the 11th European Conference on Earthquake Engineering, Sept 6-11, Paris, France.
|
21 |
Badoux, M., & Jirsa, J. O. (1990). Steel bracing of RC frames for seismic retrofitting. Journal of Structural Engineering, ASCE, 116(1), 55-74.
DOI
|
22 |
Belleri, A. (2009). Displacement based design for precast concrete structures. PhD thesis, University of Toronto.
|
23 |
Blandon, C. A. (2004). Equivalent Viscous Damping for DDBD. MSc Thesis, ROSE School, Pavia, Italy.
|
24 |
Calvi, G. M., & Pavese, A. (1995). Displacement-based design of building structures. In A. S. Elnashai (Ed.), European seismic design practice: Research and application, proceedings of the fifth SECED conference, Chester, United Kingdom, October 26-27 1995 (pp. 127-132). Rotterdam, Netherlands: A.A. Balkema.
|
25 |
Calvi, G. M., & Kingsley, G. R. (1995). Displacement-based seismic design of multi-degree-of-freedom bridge structures. Earthquake Engineering and Structural Dynamics, 24, 1247-1266.
DOI
ScienceOn
|
26 |
CEN. (1998). Eurocode 8: Design provisions for earthquake resistance of structures, prEN-1998-1:200X, Revised Final PT Draft (preStage 49). Brussels, Belgium: Committee European de Normalization.
|
27 |
Chopra, A. K., & Goel, R. K. (2001). Direct displacement-based design: Use of inelastic vs. elastic design spectra. Earthquake Spectra, EERI, 17(1), 47-64.
DOI
ScienceOn
|
28 |
Fajfar, P. (2000). A nonlinear analysis method for performancebased seismic design. Earthquake Spectra, 16(3), 573-592.
DOI
ScienceOn
|
29 |
Fardis, M. N., Panagiotakos, T. B., & Telemachos, B. (1997). Displacement-based design of RC buildings: Proposed approach and application. In P. Fajfar & H. Krawinkler (Eds.), Proceedings of the seismic design methodologies for the next generation of codes. Bled, Slovenia, June 24-27 1997 (pp. 195-206). Rotterdam, Netherlands: A.A. Balkema.
|
30 |
Priestley, M. J. N., & Kowalsky, M. J. (2000). Direct displacement-based design of concrete buildings. Bulletin of the New Zealand National Society for Earthquake Engineering, 33(4), 421-444.
|
31 |
Shibata, A., & Sozen, M. A. (1976). Substitute-structure method for seismic design in R/C. Journal of the Structural Division, 102(1), 1-18.
|
32 |
Sullivan, T. J., Priestley, M. J. N., & Calvi, G. M. (2005). Development of an innovative seismic design procedure for frame-wall structures. Journal of Earthquake Engineering, 9(Special Issue 2), 279-307.
DOI
|
33 |
Sullivan, T. J., Priestley, M. J. N., & Calvi, G. M. (2006). Direct displacement design of frame-wall structures. Journal of Earthquake Engineering, 10(Special Issue 1), 91-124.
|
34 |
Sullivan, T. J., Priestley, M. J. N., & Calvi, G. M. (2004).Displacement shapes of framewall structures for direct displacement based design. In Proceedings of Japan-Europe 5th Workshop on Implications of Recent Earthquakes on Seismic Risk, Bristol, UK.
|
35 |
Sullivan, T. J., Priestley, M. J. N., & Calvi, G. M. (2009). Introduction to a model code for displacement-based seismic design. In Proceedings, ACES Workshop on Performance-Based Earthquake Engineering. Corfu, Greece.
|
36 |
Tasnimi, A. A., & Masoomi, A. (1999). Evaluation of response of reinforced concrete frames strengthened with steel bracing. In Proceedings of the Third International Conference on Seismology and Earthquake Engineering, Iran, (in Farsi).
|
37 |
Youssef, M., Ghaffarzadeh, H., & Nehdi, M. (2007). Seismic performance of RC frames with concentric internal steel bracing. Journal of Engineering Structures, 29, 1561-1568.
DOI
ScienceOn
|