Browse > Article

SIMULATION OF KNOCK WITH DIFFERENT PISTON SHAPES IN A HEAVY-DUTY LPG ENGINE  

CHOI H. (School of Mechanical and Aerospace Engineering, Seoul National University)
LIM J. (School of Mechanical and Aerospace Engineering, Seoul National University)
MIN K. (School of Mechanical and Aerospace Engineering, Seoul National University)
LEE D. (Department of Mechanical Engineering, Inha University)
Publication Information
International Journal of Automotive Technology / v.6, no.2, 2005 , pp. 133-139 More about this Journal
Abstract
In this study, a three-dimensional transient simulation with a knock model was performed to predict knock occurrence and autoignition site in a heavy-duty LPG engine. A FAE (Flame Area Evolutoin) premixed combustion model was applied to simulate flame propagation. The coefficient of the reduced kinetic model was adjusted to LPG fuel and used to simulate autoignition in the unburned gas region. Engine experiments using a single-cylinder research engine were performed to calibrate the reduced kinetic model and to verify the results of the modeling. A pressure transducer and a head-gasket type ion-probe circuit board were installed in order to detect knock occurrences, flame arrival angles, and autoignition sites. Knock occurrence and position were compared for different piston bowl shapes. The simulation concurred with engine experimental data regarding the cylinder pressure, flame arrival angle, knock occurrence, and autoignition site. Furthermore, it provided much information about in-cylinder phenomena and solutions that might help reducing the knocking tendency. The knock simulation model presented in this paper can be used for a development tool of engine design.
Keywords
Citations & Related Records

Times Cited By Web Of Science : 1  (Related Records In Web of Science)
Times Cited By SCOPUS : 3
연도 인용수 순위
1 Cowart, J. S., Keck, J. C. and Heywood, J. B. (1990). Engine knock predictions using a fully-detailed and a reduced chemical kinetics mechanism. 23rd Symposium on Combustion, 1055-1062
2 Dardalls, D., Matthews, R. D., Lewis, D. and Davis, K. (1998). The texas project, Part5-Economic analysis: CNG and LPG conversion of light-duty vehicle fleets. SAE Technical Paper No. 982447
3 Kang, K. Y., Lee, D. Y., Oh, S. M. and Kim, C. U. (2001). Performance of a liquid phase LPG injection engine for heavy duty vehicles. SAE Technical Paper No. 2001-02-1958
4 Poinsot, T. J., Haworth, D. C. and Bruneaux, G. (1993). Direct simulation and modeling of flame-wall interaction for premixed turbulent combustion. Combustion and Flame 95, 118-132   DOI   ScienceOn
5 Kim, C. U., Lee, D. Y., Oh, S. M., Kang, K. Y., Choi, H. and Min, K. (2002). Enhancing performance and combustion of an LPG MPI engine for heavy duty vehicles. SAE Technical Paper No. 2002-01-0449
6 Adapco Software Limited. (1999). ProICE and ICE Version 4.0. Adapco Software Limited. New York
7 Choi, H., Hwang, S., Lee, J. and Min, K. (2002). 3dimensional simulation of knock in a heavy-duty LPG engine. SAE Technical Paper No. 2002-01-2700
8 Hwan, S., Lee, J. and Min, K. (2001). The study on knock characteristics of heavy duty LPG engine. Fall Conference Proc. Korean Society of Automotive Engineers, 448-453
9 Kamarados, P. (1994). Combustion modeling in internal combustion engines. M. S. Dissertation, Imperial College
10 Heywood, J. B. (1988). Internal Combustion Engine Fundamentals. Mc-Graw Hill. New York
11 Lee, J., Choi, H., Hwan, S. and Min. K. (2002). Study on the estimation of knock position in a LPG engine with ion-probe head gasket. Spring Conference Proc. Korean Society of Automotive Engineers 1486-1492
12 Weller, H. G., Uslu, S., Gosman, A. D., and Maly, R. R. (1994). Predictions of combustion in homogeneous charge spark ignition engines. 3rd International Symposium COMODIA94, 163-169
13 Pae, S. and Min, K. (2001). Modeling of laminar burning velocities for hydrocarbon and methanol fuels by using detailed chemical reaction mechanisms. Trans. Korean Society of Mechanical Engineers, 25, 1303-1310
14 Lee, Y., Pae, S., Min, K. and Kim, E. S. (2000). Prediction of knock onset and the autoignition site in spark-ignition engines. Proc. Instn. Mech. Engrs. 214D,751-763
15 Heel, R., Maly, R., Weller, H. G. and Gosman, A. D., Validation of SI combustion model over range of speed, load, equivalence ratio and spark timing. 4th International Symposium COMODIA98, 255-260
16 AVL. (2000). BOOST User's Guide Version 3.3. AVL. Austria
17 Chun, K. M., Heywood, J. B. and Keck, J. C. (1988). Predictions of knock occurrence in a spark-ignition engine. 22nd Symposium on Combustion, 455-463
18 Herweg, R. and Maly, R. (1992). A fundamental model for flame kernel formation in S. I. engines. SAE Technical Paper No. 922243
19 Chun, K. M. and Kim, K. W. (1994). Measurement and analysis of knock in an SI engine using the cylinder pressure and block vibration signals. SAE Technical Paper No. 940146