Browse > Article

Characteristics of Fluid Flow in the Fluidized Bed Shell and Tube Type Heat Exchanger with Corrugated Tubes  

Ahn Soo Whan (School of Mechanical & Aerospace Engineering, Gyeongsang National University, Institute of Marine Industry)
Bae Sung Taek (Taekeon Co., Ltd)
Kim Myoung Ho (Marine Engineering Dpt, Graduate School, Gyeongsang National University)
Publication Information
International Journal of Air-Conditioning and Refrigeration / v.12, no.4, 2004 , pp. 198-205 More about this Journal
Abstract
An experimental study was carried on the characteristics of fluid flow and heat transfer in a fluidized bed shell-and-tube type heat exchanger with corrugated tubes. Seven different solid particles having same volume were circulated in the tubes. The effects of vari­ous parameters such as water flow rates, particle geometries and materials, and geometries of corrugated tubes on relative velocities and drag coefficients were investigated. The present work showed that the drag force coefficients of particles in the corrugated tubes were usually lower than those in the smooth tubes, meanwhile the relative velocities between particles and water in the corrugated tubes were little higher than those in the smooth tubes except the particles of glasses.
Keywords
Fluidized bed heat exchanger; Solid particle; Spirally corrugated tube; Drag coefficient; Relative velocity;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Basu, P. and Nag, P. K., 1987, An investigation into heat transfer in circulatiing fluidized beds, Int. J. of Heat and Mass Transfer, Vol. 30, No. 11, pp.2399-2409
2 Adomeit, P. and Renz, U., 1995 The influence of liquid flow rate on particle deposition and detachment, Proc. of Fouling Mitigation of Industrial Heat Exchange Equipment, An International Conference, San Luis Obispo, California, pp. 421-433
3 Kallay, N., Biskup, B., Tomic, M. and Matijevic, E., 1986, Particle adhesion and removal in model systems: X. The effect of electrolytes on particle detachment, J. Coll. Interf. Sci., Vol.114(2), pp.362-375
4 Chun, W. P., Lee, K. W., Park, K. H., Lee, K. J. and Hwang, H. W., 2002, Heat transfer characteristics of organic sludge particles in rotary dryer, Proc. of KSME Autumn Annual Meeting, pp. 2185-2190
5 Rautenbach, R. and Kollbach, J. 1986, New developments in fluidized bed heat transfer for preventing fouling, Swiss Chem., Vol.8, No.5, pp.47-55
6 Lee, K. B., Jun, Y. D. and Park, S.I., 2000, Measurement of heat transfer rates and pressure drops in a solid particle circulating fluidized heat exchanger, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol.12, No.9, pp.817-824
7 Jun, Y. D., Lee, K. B., Kim, A. K. and Lee, Y., 2002, Heat transfer characteristics and pressure drop of a fluidized bed heat exchanger without baffle plate, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol.14, No.2, pp.989-995
8 Tianqing, L., 1995, Mechanism study on circulating flow of particles within a fluid bed antifouling heat exchanger, Proc. of Fouling Mitigation of Industrial Heat Exchange Equipment, An International Conference, San Luis Obispo, California, pp.377-384
9 Hubbe, M. A., 1985, Detachment of colloidal hydrous oxide spheres from flat solids exposed to flow: 2. Mechanisms of release, Coll. Surf., Vol.16, pp.249-270
10 Kollbach, J. Dahm, W. and Rautenbach, R., 1987, Continuous cleaning of heat exchanger with recirculating fluidized bed, Heat Transfer Engineering, Vol.8, No.4, p.26
11 Hatch, L. P. and Weth, G. G., 1970, Scale control in high temperature distillation utilizing fluidized bed heat exchanger, R & D Progress Report, No.571
12 Kim, T. K., Youn, H. K., Seung, S.S. and Park, S. W., 2002, Development of a simulation software for the fluidized bed sludge incinerator, Proc. of KSME Autumn Annual Meeting, pp.2179-2184
13 Bowen, B. D. and Epstein, N., 1979, Fine particle deposition in smooth parallel-plate channels, J. Coll. Interf. Sci., Vol.72, pp.81-97
14 Lee, Y. P., Yoon, S. Y., jurng, J. S. and Kim, N. H., 1995, Mechanism of fouling reduction and heat transfer enhancement in a circu-lating fluidized bed heat exchanger, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol.7, No.3, pp.450-460
15 Sjollema, J. and Busscher, H.J., 1988, Deposition of polystyrene latex particle toward polymethylmethacrylate in a parallel flow cell, J. ColI. Interf. Sci., Vol. 132, pp.382-394