1 |
Fischer, S. K. and Rice, C. K., 1980, The Oak Ridge heat pump models: I. A steady-state computer design model for air-to-air heat pumps, ORNL/CON-80/R1, Oak Ridge National Lab.
|
2 |
Yoon, B., Park, H. Y., Yoo, K. C. and Kim, Y. C., 1999, Air-conditioner cycle simulation using tube-by-tube method. Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 11, No. 4, pp. 499-510
|
3 |
Gnielinski, V., 1976, New equations for heat and mass transfer in turbulent pipe and channel flow, International Chemical Engineering, Vol. 16, No. 2, pp. 359-368
|
4 |
Park, H, Y., Park, D. K. and Lee, K. S., 1989, Modeling of fin-tube heat exchanger, Transactions of the Korean Society of Mechanical Engineers, Vol. 13, No. 5, pp. 952-961
|
5 |
Hiller, C. C. and Glicksman, L. R., 1976, Improving heat pump performance via compressor capacity control-analysis and test, MIT Energy Lab.
|
6 |
Hwang, Y. J., 2000, The optimum design of heat pump system with refrigerant distributor, The Society of Air-Conditioning and Refrigerating Engineers of Korea Symposium Series: Refrigeration Section, pp. 93-99
|
7 |
Kim, N. H., Kim, J. S., Cho, J. P., Yun, J. H., Peck, J. H., Lee, S. G., Nam, S. B. and Kwon, H. J., 1997, Wet surface performance test of fin-tube heat exchangers with slit-wavy fin, Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 9, No. 2, pp.153-162
|
8 |
Yoon, B., Yoo, K. C., Park, H. Y. and Kim, Y. S., 1996, Modeling of cross-flow fin-tube evaporator, The Korean Society of Mechanical Engineers Symposium Series: Thermal and Fluid Engineering Section, pp. 73-81
|
9 |
McQuiston, F. C. and Parker, J. D., 1997, Heating, ventilating, and air conditioning: analysis and design, 4th ed., John Wiley & Sons, Inc., pp. 543-547
|
10 |
Threlkeld, J. L., 1970, Thermal environmental engineering, Prentice-Hall, New York, pp. 257-259
|
11 |
Han, C. S. and Kim, K. W., 1996, The air side heat transfer coefficient on the wetted surface of fin and tube heat exchanger, Air-Conditioning and Refrigeration Engineering, SAREK, Vol. 25, No. 2, pp.161-173
|
12 |
Hartnett, J. P., Koh, J. C. Y. and Mccomas. S. T., 1962, A Comparison of predicted and measured friction factors for turbulent flow through rectangular ducts, Trans. ASME J Heat Transfer, pp. 82-88
|
13 |
Domanski, P. A., 1989, EVSIM-An evaporator simulation model accounting for refrigerant and one dimensional air distribution, NISTIR 89-4133, U. S. Dept. of Commerce, NIST, Maryland 20899
|
14 |
SAREK, 1999, TAB. Standard for HVAC applications
|
15 |
Yun, J. Y. and Lee, K. S., 1996, Heat transfer characteristics of fin and tube heat exchangers with various interrupted surfaces for air conditioning application, Transactions of the Korean Society of Mechanical Engineers B, Vol. 20, No. 12, pp. 3938-3948
|
16 |
Schmidt, T. E., 1949, Heat transfer calculations for extended surface, Journal of the ASRE, Refrigerating Engineering, Vol. 4, pp. 351-357
|
17 |
Kandlikar, S. G., 1990, A general correlation for saturated two-phase boiling heat transfer inside horizontal and vertical tubes, Trans. ASME J. Heat Transfer, Vol. 112, pp, 219-228
|
18 |
Sheffield, J. W., Wood, R. A. and Sauer, Jr., H. J., 1989, Experimental investigation of thermal conductance of finned tube contacts, Experimental Thermal and Fluid Science, Vol. 2, pp. 107-121
|