Browse > Article
http://dx.doi.org/10.9726/kspse.2014.18.6.021

A Study on the Spray Characteristics of CRDI System with Ambient Pressure  

Kim, Sang-Am (Graduate School, ChonNam University)
Wang, Woo-Gyeong (Faculty of Marine Technology, ChonNam University)
Publication Information
Journal of Power System Engineering / v.18, no.6, 2014 , pp. 21-28 More about this Journal
Abstract
The studies of the spray characteristics for a CRDI engine had been advancing by many researchers, because the performance and exhaust emission were significantly affected with the spray characteristics. But most experiments of the studies would be done at low ambient pressure conditions under 2MPa. In this study, injection rates were measured with Zeuch's method at various ambient pressures to 5MPa and a constant injection pressure of 130MPa. On the same conditions, non-evaporating spray images were taken with a high speed camera and analyzed carefully with Adobe Photoshop CS3. Macroscopic spray characteristics and breakup processes in the spray could be found from the examined and analyzed data. The initial injection rate, penetration, angle, velocity and breakup of the spray were practically affected with a variation of the ambient pressure, but the injection start time and injection period were scarcely affected. As the ambient pressure was higher, the breakup of a high density droplet region in the spray was happened slowly and the main position of breakup was shifted from a front of the spray to a upstream around a nozzle. The results and techniques of spray visualization and injection rate measurement in this study would be practically effective to study a high pressure diesel spray for a CRDI.
Keywords
Injection Rate; Zeuch's Method; Non-evaporating Spray; Macroscopic Characteristics; Breakup Process;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 C. H. Jeon et al, 2010, "A Study on the Non-evaporating Diesel Spray Characteristics as a Function of Ambient Pressure in Constant Volume Combustion Chamber", Journal of KSME, Vol. 34, No. 5, pp. 645-652.   과학기술학회마을   DOI   ScienceOn
2 J. G. Hong et al, 2012, "Spray Characteristics of CRDI for injection and ambient pressure", KSAE12-G0011, pp. 56-60.
3 J. S. Kang, W. Choi and C. S. Bae, 2004, "Analysis of Transient Diesel Spray with Visualization and Injection Rate Measurement", Transactions of KSAE, Vol. 12, No. 5, pp. 12-18.   과학기술학회마을
4 A. Takamura et al, 1989, "Development of a New Measurement Tool for Fuel Injection Rate in Diesel Engines", SAE 890317.
5 G. R. Bower and D. E. Foster, 1991, "A Comparison of the Bosch and Zeuch Rate of Injection Meters", SAE 910724.
6 S. A. Kim and W. G. Wang, 2013, "The Fabrication and Trial Performance of Injector Driver for CRDI", Journal of KSPME, Vol. 17, No. 2, pp. 38-45.   과학기술학회마을   DOI   ScienceOn
7 H. M. Kim, J. W, Chung, K. H. Lee, 2007, "A Study on the Characteristics of Injection-rate at Different Injection Conditions in a Common-rail Diesel Injector", Journal of ILASS-KOREA, Vol. 12, No. 3, pp. 166-171.   과학기술학회마을
8 C. N. Yeh, H. Kosaka, T. Kamimoto, 1993, "Fluorescence/Scattering Image Technique for Particle Sizing in Unsteady Diesel Spray", Transactions of JSME (B), No. 499, pp. 4008-4013.
9 J. K. Yeom and S. S. Chung, 2005, "Effect of the Change in Ambient Gas Density on the Mixture Formation Process in Evaporative Free Diesel Spray", Journal of KSPME, Vol. 9, No. 4, pp. 209-213.   과학기술학회마을
10 Y. H. Won and W. T. Kim, 2004, "Visualization of Breakup and Atomization Processes in Non-evaporating Diesel Sprays", Transactions of KSAE, Vol. 12, No. 1, pp. 25-31.   과학기술학회마을