Browse > Article
http://dx.doi.org/10.9726/kspse.2011.15.4.054

Study on the Design Program for Non-standard Plastic Gear  

Heo, M.B. (중앙대학교 기계공학부)
Ham, S.H. (동주대학교 자동차튜닝과)
Nam, W.K. (중앙대학교 기계공학부 대학원)
Oh, S.H. (중앙대학교 기계공학부)
Publication Information
Journal of Power System Engineering / v.15, no.4, 2011 , pp. 54-59 More about this Journal
Abstract
Currently, plastic gear is widely used as parts of office equipment and industrial machines, because plastic substance has an advantage of light weight and possible to operate in oil-fewer conditions. However, under cyclic loadings, their occurred repetitive deformation due to weak tensile strength and bending stress rather than metal gear. Furthermore, they have a problem of attrition and breakage owing to frictional heat. For solving these problems, when plastic gear's opponents are metal gear, we should design that plastic gear's tooth be thick and metal gear's tooth be thin. In this research, we developed the program which developing tooth profile of non-standard gears automatically and calculating over-pin diameter for inspection after making gear.
Keywords
Gear; Non-Standard; Plastic; Design Program;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 김충현, 안효석, 정대형, 2002, "플라스틱스퍼기어의 내구성 향상에 관한 실험연구", 대한기계학회논문집A권, 제26권, 제9호, pp.1922- 2002
2 홍장표, 2004, "기계설계", 북스힐, 서울, pp.515
3 조승래, 이춘만, 1999, "전위기어 치형곡선의 Biarc Curve Fitting 최적화에 관한 연구", 한국정밀공학회99년추계학술대회논문지, pp.985-988
4 함성훈, 남원기, 오세훈, 2010, "직선이송용 Pin-Pinion Gear의 최적 치형에 대한 연구", 한국동력기계공학회지, 14권, 제3호, pp. 64- 70
5 Hideo Iwasaki, et al 1995, "Method of and apparatus for measuring tooth thickness of gear" US Patene Number 5,396,711
6 C. H. Kim, 2006, "Durability improvement method for plastic spur gears", Tribology International, Vol.39, pp.1454 -1461   DOI   ScienceOn
7 권윤숙, 정영득, 2008, "내측기어 성형용 사출성형 금형구조의 개발", 한국동력기계공학회지, 12권, 제6호, pp. 78-82
8 정태형, 강성규, 하영욱, 2005, "플라스틱 기어의 피로수명 평가 및 수명예측", 한국공작기계학회 2005년 춘계학술대회 논문집, pp. 239-246
9 Naohisa TSUKAMOTO, 1981, "investigation about the strength of plastic Gear 2nd report", Bulletin of the JSME, Vol.24, No.191, pp 872-881   DOI   ScienceOn