Browse > Article
http://dx.doi.org/10.5781/KWJS.2013.31.4.47

VHCF Characteristics of SCMH2 Steel Depending on the Surface Treatment Conditions  

Suh, C.M. (School of Mechanical Engineering, Kyungpook National University)
Suh, C.H. (Daegu Mechatronics & Materials Institute)
Suh, M.S. (Korea Institute of Energy Research)
Publication Information
Journal of Welding and Joining / v.31, no.4, 2013 , pp. 47-53 More about this Journal
Abstract
SCMH2 steel is widely used in the industrial members of car and tractor. This study focused on material properties and evaluation technology of the SCMH2 steel regarding the surface treatment followed by carburizing and nitriding, by means of impact test, hardness test. and fatigue test including HCF (high cycle fatigue) and VHCF (very high cycle fatigue). Drop weight impact tester (Instron, 9250 Hv) and Cantilever type rotating-bending fatigue tester (YRB200, 3150 rpm) were used to characterize the SCMH2 standard specimen before and after carburizing/nitriding. In order to understand those effects on fatigue characteristics and material properties, the fractured surfaces were carefully observed and analyzed by SEM (scanning electron microscope) and EDS (energy-dispersive X-ray spectroscopy).
Keywords
SCMH2; VHCF(Very High Cycle Fatigue); Impact; Carburizing; Nitriding;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Kwak, B.M. and Gil, Y.J. : An Indirect Experimental Method for the Determination of Mechanical Properties of Ion-nitrided Layer and Residual Stress Distribution, Trans. of the Korean Society of Mechanical Engineers(A) 9(2), (1985) 240-249 (in Korean)   과학기술학회마을
2 Suh, C.M. and Kitagawa, H. : Fatigue Microcracks in a Low Carbon Steel, Fatigue Fract. Engng. Mater. Struct. 8-2 (1985) 193-203   DOI   ScienceOn
3 Sakai, T., Okada, K., Furuichi, M., Nishikawa, I. and Sugeta, A. : Statistical fatigue properties of SCM435 steel in ultra long-life regime based on JSMS database on fatigue strength of metallic materials. Inter. Jour. of Fatigue 28-11 (2006) 1486-1492   DOI   ScienceOn
4 Shiozawa, K., Morii, Y., Nishino, S., and Lu, L. : Subsurface crack initiation and propagation mechanism in high strength steel in a very high cycle fatigue regime. Inter. Jour. of Fatigue 28-11 (2006) 1521-1532   DOI   ScienceOn
5 Sakai, T., Sato, Y., Nagano, Y., Takeda, M. and Oguma, N. : Effect of stress ratio on long life fatigue behavior of high carbon chromium bearing steel under axial loading. Inter. Jour. of Fatigue 28-11 (2006) 1547-1554   DOI   ScienceOn
6 Suh, C.M., Kim, J.H. : Fatigue characteristics of bearing steel in very high cycle fatigue, Journal of Mechanical Science and Technology 23 (2009) 420-425   과학기술학회마을   DOI   ScienceOn
7 Marco Boniardi, Fabrizio DErrico, Chiara Tagliabue, : Influence of carburizing and nitriding on failure of gears -A case study, Engineering failure Analysis 13 (2006) 312-33   DOI   ScienceOn
8 S.H. Song, S.H. Lee : A study on stress analysis and fatigue behaviors of carbonitrided Cr-Mo(SCM415) steel, J. of the Korean Soc. of Precision Eng. 15-8 (1998) 135-144 (in Korean)   과학기술학회마을
9 Zettl, B., Mayer, H., Ede, C., Stanzl-Tschegg, S. :Very high cycle fatigue of normalized carbon steels. Inter. Jour. of Fatigue 28-11 (2006) 1583-1589   DOI   ScienceOn
10 Suh, C.M., Song, G.H., Park, H.D. and Pyoun, Y.S. : A Study on the Mechanical Characteristic of Ultrasonic Cold Forged SKD61. Inter. Journal of Modern Physics B 20(25-27) (2006) 4541-4546.   DOI   ScienceOn
11 Barsom, J.M. and Rolfe, S.T. : Fracture and Fatigue Control in Structure (1999), Prentice-Hall Inc, 163-192
12 C.S. Kang, C.M. Suh : The effect of carburization on the fatigue of low carbon steel, J. of the Society of Naval Architects of Korea, 10-2 (1973) 9-18 (in Korean)   과학기술학회마을
13 Chang-Min Suh, Min-Soo Suh, Hae-Yong Cho : Variation of Impact Values by Heat Treatment Temperature to Prevent Brittle Fracture of Roll Shell Steel, J. of Ocean Engineering and Technology, 25-5 (2011) 33-39 (in Korean)   과학기술학회마을   DOI
14 Chang-Min Suh, Min-Soo Suh and Sang-Yeob Oh : Variation of Impact Values by Heat Treatment Temperature to Prevent Brittle Fracture of Roll Shell Steel (II) J. of Ocean Engineering and Technology, 25-5 (2011) 40-46 (in Korean)   과학기술학회마을
15 Lawrence H. Van Vlack, Elements of Materials Science & Engineering 6th ed. (1989) Addison-Wesley Pub. Co. Inc, 292-301
16 C.M. Suh, M.S. Suh, S.K. Kim: Fracture Mechanics of Surface Fatigue Crack Growth by Ductile Striation Space Measurement in Notched Waspaloy, Fatigue Fract. Engng. Mater. Struct. 35, 1 (2011) 30-36
17 Suh, C.M. and Kitagawa, H. : Crack Growth Behaviour of Fatigue Microcracks in Low Carbon Steels, Fatigue Fract. Engng. Mater. Struct. 9-6 (1987) 409-424   DOI   ScienceOn
18 Suh, M.S., Pyoun, Y.S., Suh, C.M. :Variation of fatigue characteristics by UNSM on Ti-6Al-4VComparison of rotating fatigue test and axial load tension-comparison fatigue test- Trans. of the Korean Society of Mechanical Engineers(A), 36-4 (2012) 443-449 (in Korean)   DOI   ScienceOn
19 C.M. Suh, M.S. Suh, N.S. Hwang: Growth behaviors of small surface fatigue crack in AISI 304 steel, Fatigue Fract. Engng. Mater. Struct. 35, 1 (2011) 22- 29
20 Chang-Min Suh and Min-Soo Suh : Variations of Impact Value and Hardness for Roll Shell Steel and S25C under Various Tempering, International Journal of Modern Physics B, 25, 31 (2011) 4245- 4248   DOI   ScienceOn