| 1 |
Nam Hyun Kang et al. : Behaviors of the interface cracks an Al-Fe dissimilar joining, Journal of the Korean Welding and Joining Society, Spring (2006-5) 59-61 (in Korean)
과학기술학회마을
|
| 2 |
YANG Ke et al. : A New Type of Submerged Arc Flux Cored Wire Used for Hardfacing Continuous Casting Rolls, Journal of Iron and Steel Research, International, 18(11) (2011) 74-79
|
| 3 |
X. H. Wang et al. : Microstructure and wear properties of Fe-based hardfacing coating reinforced by TiC particles, Journal of Materials Processing Technology, 168 (2005) 89-94
DOI
ScienceOn
|
| 4 |
Y. B. Shin et al. : Cracking and Its Prevention in Overlay Welds of Austenitic Stainless steels/Inconel 690 on Mn-Ni-Cr-Mo Steel for Reactor Pressure Vessel, Journal of the Korean Welding and Joining Society, Oct. 01 (2000) 211-213
|
| 5 |
Byung-Il Yang et al. : Hot Cracking Behavior in Inconel 690 Overlay Welds on Mn-Ni-Cr-Mo Steel for Pressure Vessels, 20(2) (2002) 82-89
과학기술학회마을
|
| 6 |
M. Mosallaee pour et al. : Surface modification of low carbon steel substrate by Al-rich clad layer applied by GTAW, Surface & Coatings Technology 206 (2011) 217-223
DOI
ScienceOn
|
| 7 |
R. Arabi Jeshvaghani et al. : Enhancement of wear resistance of ductile iron surface alloyed by stellite 6, Materials and Design, 32 (2011) 2028-2033
DOI
ScienceOn
|
| 8 |
Jin-Gwi Byeon, Kwang-Soo Park : Development of Temper Bead Welding Process for Preemptive Weld Overlay of Alloy 82/182 Welds, KWJS 2009-Autumn pp.16 (in Korean)
|
| 9 |
J. M. Kweon et al. : Characteristic of GTAW weld overlay on Cr-Mo steel, KWS (2004-Autumn) 135-137 (in Korean)
과학기술학회마을
|
| 10 |
Hyo Hui Park et al. : Process development for productivity improvement In-pipe TIG Overlay welding, June 09, Korea Society of Marine Engineering (2011), 78 (in Korean)
|
| 11 |
N. Murugan et al. : Effect of MIG process prarmeters on the geometry of the bead in the automatic surfacing of stainless steel, J. of Matereals Processing Technology, 41 (1994) 381-398
DOI
ScienceOn
|
| 12 |
Ill-Soo Kim, Joon-Sik Son : An investigation into an intelligent system for predicting bead geometry in GMA welding process, J. of Materials Processing Technology, 159 (2005) 113-118
DOI
ScienceOn
|
| 13 |
Joon-Sik Son, Ill-Soo Kim et al : Development of experimental model for bead profile-prediction in GMA welding, Journal of KWS 23-4 (2005) 41-47 (in Korean)
과학기술학회마을
|
| 14 |
Dong-Jin Kim et al. : Effect of Welding Condition on Microstructure of Transient Zone in Overlay Weld of 3Cr-1Mo Steel/STS-309L, Journal of KWS, 18(2) April (2000) 176-183
과학기술학회마을
|
| 15 |
Hyeon-ju Ha et al. : Overlay welding by pulse MIG welding with Inconel 625 for marine crude oil extraction pipe inside, The Korean Society of Marine Engineering, June 09, (2011), 75 (in Korean)
|
| 16 |
K. S. YOO et al. : The development of prevention technique for crack and porosity occurred during hardening overlay auto MIG welding for press die of gray cast iron, KWS Autumn November (2005) 114-116 (in Korean)
|
| 17 |
The NanoSteel Company, Brenergun Daniel James et al. : feedstock powder for production of high hardness overlays, Korean unexamined patent 10-2012-0040735 (in Korean)
|
| 18 |
Chang-Gyu Kim et al. : Effects of Nb, V on the Mechanical Properties of Continuous Casting Rolls Overlaidhang, The Korean Society of Ocean Engineers 18(2) (2004) 70-76 (in Korean)
과학기술학회마을
|
| 19 |
Ch. Just et al. : Influence of welding current on carbide/matrix interface properties in MMCs, Journal of Materials Processing Technology 210 (2010) 408-414
DOI
ScienceOn
|
| 20 |
KISWEL, Han-Kyu Kang : Flux cored wire for overlaying of roll and method for overlaying of roll using thereof, Korean patent, 10-0543693 (in Korean)
|
| 21 |
Ch. Just et al. : Influence of processing conditions on the carbide/matrix interface in sintered composite layers, Surface & Coatings Technology 205 (2010) 35-42
DOI
ScienceOn
|
| 22 |
Amado J. M. et al. : Laser cladding of tungsten carbides hardfacing alloys for the mining and mineral industry, Applied Surface Science 255(10) (2009) 5553-5556
DOI
ScienceOn
|
| 23 |
Chiang KA, Chen YC. : Microstructural characterization and microscopy analysis of laser cladding stellite 12 and tungsten carbide, Journal of Materials Processing Technology, 182(1-3) (2007) 297-302
DOI
ScienceOn
|
| 24 |
Acker K et al. : Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings. Wear 258(1-4) (2005) 194-202
DOI
ScienceOn
|
| 25 |
Wang D et al. : Investigation on the microstructure and cracking susceptibility of laser-clad  alloy coatings. Surface and Coating Technology 202(8) (2008) 1371-1378
DOI
ScienceOn
|
| 26 |
Paul CP et al. : Cladding of WC-12Co on low carbon steel using a pulsed Nd:YAG laser, Materials Science and Engineering 464(1-2) (2007) 170-176
DOI
ScienceOn
|
| 27 |
M. Duraselvam, R. Galun, S. Siegmann, V. Wesling : Laser in Engineering 15 (2005), 355
|
| 28 |
D'Oliveira et al. : Pulsed current plasma transferred arc hardfacing, Journal of Materials Processing Technology 171 (2006) 167-174
DOI
ScienceOn
|
| 29 |
E. Fernandez, M. Cadenas, R. Gonzalez, C. Navas, R. Fernandez, de Damborenea : Wear 259 (2005), 870
DOI
ScienceOn
|
| 30 |
R. Menon : Recent advances in cored wires for hardfacing, Welding Journal, Nov. (2002) 53-58
|
| 31 |
K. Siva, N. Murugan, R. Logesh : Int. J. Adv. Manuf. Technol. 41 (2009) pp.2441
|
| 32 |
Namhoon Kim, Jin-Hyun Koh et al. : Effects of Welding Fluxes on the GMA Overlay Welding Behavior, Journal of the Korean Welding Society (2010-Spring) 72 (in Korean)
과학기술학회마을
|
| 33 |
Gauthier Beaurin et al. : Microstructural and mechanical properties evolutions of plasma transferred arc deposited Norem02 hard-facing alloy at high temperature, Materials Science and Engineering A 528 (2011) 5096-5105
DOI
ScienceOn
|
| 34 |
C. Katsich, E. Badisch : Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions, Surface & Coatings Technology 206 (2011) 1062-1068
DOI
ScienceOn
|
| 35 |
F. Fernandes et al. : Effect of arc current on microstructure and wear characteristics of a Ni-based coating deposited by PTA on gray cast iron, Surface & Coatings Technology, 205 (2011) 4094-4106
DOI
ScienceOn
|
| 36 |
Q. Y. Hou et al. : Influence of nano- particles on the microstructure and wear resistance of the nickel-based alloy coating deposited by plasma transferred arc overlay welding, Surface & Coatings Technology 205 (2011) 2806-2812
DOI
ScienceOn
|
| 37 |
C. Sudha et al. : Microchemical and micro- structural studies in a PTA weld overlay of Ni-Cr-Si-B alloy on AISI 304L stainless steel, Surface & Coatings Technology, 202 (2008) 2103-2112
DOI
ScienceOn
|
| 38 |
J. F. Flores et al. : Erosion-corrosion degradation mechanisms of Fe-Cr-C and WC-Fe-Cr-C PTA overlays in concentrated slurries, Wear 267 (2009) 1811-1820
DOI
ScienceOn
|
| 39 |
D. Kesavan, M. Kamaraj : Influence of aging treatment on microstructure, wear and corrosion behavior of a nickel base hardfaced coating, Wear 272 (2011) 7-17
DOI
ScienceOn
|
| 40 |
K. Gurumoorthy et al. : Microstructures and wear properties of nickel based hardfacing alloy, Mater. Sci. Technol. 22 (2006) 975-980
DOI
ScienceOn
|
| 41 |
A. K. Bhaduri et al. : Selection of hardfacing material for components of the indian prototype fast breeder reactor, J. Nucl. Mater. 334 (2004) 109-114
DOI
ScienceOn
|
| 42 |
Navas C : Tribological properties of laser clad Stellite 6 coatings on steel substrate. Surface Engineering 22 (2006) 26-34.
DOI
ScienceOn
|
| 43 |
T. Liyanage et al. : Influence of alloy chemistry on micro- structure and properties in NiCrBSi overlay coatings deposited by plasma transferred arc welding, Surface & Coatings Technology 205 (2010) 759-765
DOI
ScienceOn
|
| 44 |
J. M. Amado et al. : Crack Free Tungsten Carbide Reinforced Ni(Cr) Layers obtained by Laser Cladding, Physics Procedia 12 (2011) 338-344
DOI
ScienceOn
|
| 45 |
Namhyun Kang and Yeongon Yoo : Laser Cladding Technology in Overlay Welding, Journal of the Korean Welding Society, 25(1) (2007) 7-8 (in Korean)
과학기술학회마을
DOI
ScienceOn
|
| 46 |
Girish R. Desale et al. : Erosion wear behavior of laser clad surfaces of low carbon austenitic steel, Wear 266 (2009) 975-987
DOI
ScienceOn
|
| 47 |
C. P. Paul et al. : Cladding of WC-12 Co on low carbon steel using a pulsed Nd:YAG laser, Materials Science and Engineering A 464 (2007) 170-176
DOI
ScienceOn
|
| 48 |
Wei Zhang et al. : Research on Microstructure and Property of Fe-VC Composite Material Made by Laser Cladding, Physics Procedia 25 (2012) 200-204
DOI
ScienceOn
|
| 49 |
Gang Bao et al. : Stress corrosion cracking sealing in over- laying of Inconel 182 by laser surface melting, Journal of Materials Processing Technology 173 (2006) 330-336
DOI
ScienceOn
|
| 50 |
Zhou S et al. : Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding, Materials Science and Engineering 480(1-2) (2008) 564-572
DOI
ScienceOn
|
| 51 |
Shihong Shi et al. : Study of cobalt-free, Fe-based alloy powder used for sealing surfaces of nuclear valves by laser cladding, Nuclear Engineering and Design 245 (2012) 8-12
DOI
ScienceOn
|
| 52 |
Shengfeng Zhou et al. : Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding, Materials Science and Engineering A 480 (2008) 564-572
DOI
ScienceOn
|
| 53 |
S. Zhou et al. : Microstructure and wear resistance of Fe-based WC coating by multi-track overlapping laser induction hybrid rapid cladding, Optics & Laser Technology 44 (2012) 190-197
DOI
ScienceOn
|
| 54 |
K. A. Chiang et al. : Microstructural characterization & microscopy analysis of laser cladding Stellite 12 and tungsten carbide, Journal of Materials Processing Technology 182 (2007) 297-302
DOI
ScienceOn
|
| 55 |
Wei Zhang et al. : Research on Microstructure and Property of TiC-Co Composite Material Made by Laser Cladding, Physics Procedia 25 (2012) 205-208
DOI
ScienceOn
|
| 56 |
W. C. Lin, C. Chen : Characteristics of thin surface layers of cobalt-based alloys deposited by laser cladding, Surface & Coatings Technology 200 (2006) 4557-4563
DOI
ScienceOn
|
| 57 |
Dong-sheng Wang et al. : Investigation on the microstructure and cracking susceptibility of laser-clad alloy coatings, Surface & Coatings Technology 202 (2008) 1371-1378
DOI
ScienceOn
|
| 58 |
J. M. Amado et al. : Laser cladding of tungsten carbides (Spherotene1) hardfacing alloys for the mining and mineral industry, Applied Surface Science 255 (2009) 5553-5556
DOI
ScienceOn
|
| 59 |
Toshiba Corp., Hamamoto Yosio et al. : method of repairing bottom section of nuclear reactor, Korean unexamined patent 10-2011-0063802 (in Korean)
|
webmaster
