Browse > Article
http://dx.doi.org/10.5781/KWJS.2011.29.2.056

A Study on Machining Effects on Residual Stress at Dissimilar Metal Weld Region  

Lee, Kyoung-Soo (KEPCO Research Institute, Nuclear Power Generation Laboratory)
Lee, Jeong-Geun (KEPCO Research Institute, Nuclear Power Generation Laboratory)
Lee, Seong-Ho (KEPCO Research Institute, Nuclear Power Generation Laboratory)
Park, Chi-Yong (KEPCO Research Institute, Nuclear Power Generation Laboratory)
Lee, Seung-Geon (KEPCO Engineering and Construction, Electric Power Technology Laboratory)
Park, Jai-Hak (Chungbuk National University, Safety Engineering Department)
Publication Information
Journal of Welding and Joining / v.29, no.2, 2011 , pp. 56-63 More about this Journal
Abstract
his paper aimed to understand the residual stress in the dissimilar metal welds of nuclear power plant. Two kinds of residual stress were considered, which caused by welding and machining. Residual stress due to mechanical machining was measured by hole-drilling technique and x-ray diffraction method for the SA508 and F316L. Weld residual stress at dissimilar metal weld between SA508 and F316L was evaluated by FEA. Residual stress profiles were obtained for the inside surface and through thickness of welds. Machining effect was also analyzed by FEA. According to the residual stress measurement, it was observed that mechanical machining can generate tensile stress on the surface of the test material. However, FEA results showed that mechanical machining did not increase the tensile stress on the surface of weld region. Further study with more elaborate measurement and numerical analysis is required to identify the effect of machining on residual stress in the dissimilar metal weld region.
Keywords
Dissimilar metal welding; Stress corrosion cracking; Machining effect;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 W. Asano, J. Katsuyama, K.Onizawa, M. Mochizuki, M. Toyoda : Effect of Surface-Machining and Butt- Welding on Residual Stress and Hardness of Type 316L Stainless Steel Pipes, Proceedings of PVP 2008-61441, July 27-31, 2008
2 ASTM, 2001, Standard test method for determining residual stresses by the hole-drilling strain gage method, ASTM E837-01
3 SAE Handbook, Residual Measurement by X-Ray Diffraction, SAE J984a, 1971
4 MSC, PATRAN, Ver. 2007, 2007
5 HKS, ABAQUS, Ver. 6.8, 2008
6 Jian Lu, "Handbook of Measurement of Residual Stress", The Fairmount Press Inc. 1996
7 C. Harrington, Advanced FEA evaluation of growth of postulated circumferential PWSCC flaws in pressurizer nozzle dissimilar metal weld, MRP-216 of EPRI, August 2007
8 K.S. Lee, T.R. Kim, J.H. Park, M.W. Kim, S.Y. Cho : 3-D Characteristics of the Residual Stress in the Plate Butt Weld between SA508 and F316L SS, KSMEA, 33-4 (2009) 41-409 (in Korean)   과학기술학회마을   DOI   ScienceOn
9 K.S. Lee, C.Y. Park, H.D. Kim, J.S. Kim, J.H. Park : Preliminary Evaluation of Primary Water Stress Corrosion Cracking Initiation Potential on Small Penetration Nozzle Welds by Residual Stress Analysis, Journal of KPVP, 3 (2007) 101-108 (in Korean)
10 Y.J. Kim., T.K. Song, H.Y. Bae, T.K. Song, H.Y. Bae, K.S. Lee, C.Y. Park, J.S. Yang, N.S. Huh, J.U. Kim, J.S. Park, M.S Song, S.K. Lee, J.S. Kim, S.C. Yu, Y.S. Chang : Assessment of round robin analyses results on welding residual stress prediction in a nuclear power plant nozzle, Transactions of the KSME A, 33-1 (2009) 72-81 (in Korean)   과학기술학회마을   DOI   ScienceOn
11 T.K. Song, H.Y. Bae, Y.B Chun, C.Y. Oh, Y.J. Kim, K.S. Lee, C.Y. Park, Estimation of Residual Stress Distribution for Pressurizer Nozzle of Kori Nuclear Power Plant Considering Safe End, Transactions of the KSME A 32-8 (2008) 668-677 (in Korean)   과학기술학회마을   DOI   ScienceOn
12 T.K. Song, H.Y. Bae, Y.J. Kim, K.S. Lee, C.Y. Park : Sensitivity Analysis of Finite Element Method for Estimating Residual Stress of Dissimilar Metal Multi-Pass Weldment in Nuclear Power Plant, Transactions of the KSME A 32-9 (2008) 770-7816 (in Korean)
13 P. Scott : Experimental Program on the Effects of Surface Condition on Primary Water Stress Corrosion Cracking of Alloy 182 Welds, August 2007
14 S.B.Shin, D.J.Lee and D.H.Park : A Study on the Evaluation of Transverse Residual Stress at the Multi-pass FCA Butt Weldment using FEA, Journal of the KWJS, 28-4 (2010), 26-32 (in Korean)   과학기술학회마을   DOI   ScienceOn
15 G. Parrish : Influence of microstructure on properties of case - carburised components, Heat Treta. Met. 4-2 (1977), 45-54
16 R.S. Pathania : PWSCC of Alloy 600 Materials in PWR Primary System Penetrations, EPRI TR-103696, July 1994
17 R. Pathania : Mechanics and Mechanism of Environmentally Assisted Cracking of Alloys 132/182 in BWR and PWR Environments, October 2004
18 K. Ahluwalia, C. King : Review of stress corrosion cracking of alloy 182 and 82 in PWR primary water service (MRP-220), EPRI, October 2007
19 C. King, P. O'Regan : Alloy 82/182 Pipe Butt Weld Safety Assessment for U.S PWR Plant Designs, April 2005
20 R.H. Leggatt : Residual stresses in welded structures, IJPVP 85 (2008) 144-1511
21 P. O'Regan, Welding Residual and Operating Stresses in PWR Alloy 182 Butt Welds (MRP-106), EPRI, Palo Alto, CA;2004. 1009378