Browse > Article
http://dx.doi.org/10.5781/KWJS.2009.27.3.060

A Study on the Buckling in Fillet Welds of Sheets  

Chu, Hwan-Su (Dept. of Materials Processing Eng., Graduate School, Pukuong National Univ)
Cho, Sang-Myung (Div. of Advanced Materials Sci. and Eng., Dept. of Materials Processing Eng., Pukyong National Univ)
Publication Information
Journal of Welding and Joining / v.27, no.3, 2009 , pp. 60-66 More about this Journal
Abstract
The structures distorted by welding have to be corrected. Since the correcting work needs a lot of costs and time, it is very important to minimize the buckling distortion due to welding of thin plate structure. Therefore the aim of this study is to investigate the effect of single bead on plate welding and fillet welding on the buckling distortion. In the single bead on plate welding, it was found that the welding speed and welding sequence were the most dominant factors on distortion. In the fillet welding, there were four typical buckling modes observed, and the welding sequence was the most influential factor on the buckling distortion. However typical distortion measuring method is not considered for the distortion correcting process costs of each buckling modes, therefore, in this study, the measuring method is developed to classify the buckling modes for torsion of specimen and buckling distortion depend on nodal point for the bead on plate welding specimen and fillet welds.
Keywords
Thin plate; Distortion correcting process cost; Buckling distortion; Single bead on plate welding; Fillet welding; Buckling mode; Welding speed; Symmetric welding sequence;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Joo-Sung Lee and Jae-Woo Park : Application of Tensioning Method to Deformation Control of Thin Plate Fillet Weld, Journal of The Korean Society of Ocean Engineers, 22-1(2008), 64-66 (in Korean)   과학기술학회마을   ScienceOn
2 Kyoung-Bok Jang, Jung-Gu Park, Jin-Hyuk Yang, Si-Hoon Cho, Tae-Won Jang : Study on the Analysis of Welding Induced Buckling Distortion in Thin Plate Block, Proceedings of the 2005 Autumn Annual Meeting of Korean Welding Society, Vol. 46, (2005) 23-25 (in Korean)   과학기술학회마을
3 Pierluigi Mollicone, Duncan Camilleri, Tom Gray : Procedural influences on non-linear distortions in welded thin-plate fabrication, Thin-Walled structures, 46 (2008) 1021-1034   DOI   ScienceOn
4 Myoung-Soo Han, Hyun-Uk Kim : Prevention of Welding-induced Free Edge Buckling Distortion in Thin-plated Panels, Proceedings of the 2007 Autumn Annual Meeting of Korean Welding Society, Vol. 48, (2007) 20-22 (in Korean)
5 Korean welding society : Welding and Joining Handbook, Korean welding society, (1998) 397-398 (in Korean)
6 Pearson Education Korea : MODERN WELDING TECHNOLOGY, 2002, 697-700 (in Korean)
7 Ju Li, Qiao Guan, Yaowu Shi, Delun Guo, Yuxiao Du, Yongchun Sun : Studies on characteristics of temperature field during GTAW with a trailing heat sink for titanium sheet, Journal of Materials Processing Technology, 147 (2004) 328-335   DOI   ScienceOn
8 Young-Duk Moon : The Effect of Process Parameters on Melting Efficiency in High Speed Plasma Arc Welding of EGI Thin Plate, Master's Thesis of Pukyong National Univ. (2008) (in Korean)
9 Seung-Jong Yun : Development of The Optimum Fillet Welding Process Considering Distribution of Penetration and Angular Distortion in Consumable Electrode Arc Welding, Master's Thesis of Pukyong National Univ. (2007) (in Korean)