Browse > Article
http://dx.doi.org/10.3744/SNAK.2017.54.3.258

Effects of Trim Conditions on Ship Resistance of KCS in Short Waves  

Kim, Yeoun Joo (Department of Naval Architecture and Offshore Engineering, Dong-A University)
Lee, Sang Bong (Department of Naval Architecture and Offshore Engineering, Dong-A University)
Publication Information
Journal of the Society of Naval Architects of Korea / v.54, no.3, 2017 , pp. 258-266 More about this Journal
Abstract
Numerical simulations of turbulent two phase flows around KCS have been performed to investigate effects of trim conditions on ship resistance of KCS in short waves by utilizing waves2foam. The wave lengths of LPP/2 and LPP/4 with 1m and 2m wave heights were imposed at inlet boundary. The resistance reduction at 2m trim by head and the increase of resistance at trims by stern were observed regardless of wave lengths and wave heights. The hull pressure on fore-and-aft rather than wave patterns around bulbous bows was mainly responsible for the total resistance coefficients of KCS in short waves. A phase diagram of contribution of hull pressure to the total resistance coefficients disclosed that the phase of representing the maximum resistance in time history played an important role in the effect of trim conditions on ship resistance of KCS in short waves.
Keywords
Trim condition; Added resistance; Ship resistance; Regular wave; Short waves;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Afshar, M.A., 2010. Numerical wave generation in OpenFOAM(R). Master's Thesis. Chalmers University of Technology.
2 Apsley, D. & Hu, W., 2003. CFD simulation of twoand three-dimensional free-surface flow. International Journal for Numerical Methods in Fluids, 42, pp.465-491.   DOI
3 Bruinsma, N., 2016. Validation and application of a fully nonlinear numerical wave tank. Master's Thesis. Delft University of Technology.
4 Guo, B.J. & Steen, S., 2011. Evaluation of added resistance of KVLCC2 in short waves. Journal of Hydrodynamics, 23(6), pp.709-722.   DOI
5 Jacobsen, N.G. Fuhrman D.R. & Fredsoe J., 2012. A wave generation toolbox for the open-source CFD library: OpenFoam(R). International Journal for Numerical Methods in Fluids, 70, pp.1073-1088.   DOI
6 Kume, K. Ukon, Y. Fujisawa, J. Hori, T. Tsukada, T. & Takeshi, H., 2000. Uncertainty analysis for the KCS model (SRI M.S. No. 631) tests in the SRI 400m towing tank. SPD Report No. 00-008-1. NMRI: Ship Performance Division, The Ship Research Institute, The Ministry of Transport, Japan.
7 Mayer, S. Garapon, A. & Sorensen L.S., 1988. A fractional step method for unsteady free-surface flow with applications to non-linear wave dynamics. International Journal for Numerical Methods in Fluids, 28(2), pp.293-315.   DOI
8 Lee, S.B. & Lee, Y.M., 2014. Statistical reliablity analysis of numerical simulation for prediction of model-ship resistance. Journal of the Society of Naval Architects of Korea, 51(4), pp.321-327.   DOI
9 Park, D.M. Seo, M.G. Lee, J.H. Yang, K.K. & Kim, Y., 2014. Systematic experimental and numerical analyses on added resistance in waves. Journal of the Society of Naval Architects of Korea, 51(60), pp.459-479.   DOI
10 Park, D.W. Lee, S.B. Chung, S.S. Seo, H.W. & Kwon, J.W., 2013. Effects of trim on resistance performance of a ship. Journal of the Society of Naval Architects of Korea, 50(2), pp.88-94.   DOI
11 Seo, K.C. Atlar, M. Kim, H.J. & Chun, H.H., 2009. Minimization of wave-making resistance for inclined keel contaionership. Journal of the Society of Naval Architects of Korea, 46(2), pp.97-104.   DOI
12 Seo, M.-G. Yang, K.-K. Park, D.-M. & Kim, Y., 2014. Numerical analysis of added resistance on ships in short waves. Ocean Engineering, 87, pp.97-110.   DOI
13 Yang, K.K. Seo, M.G. & Kim, Y., 2015. Analysis of added resistance in short waves. Journal of the Society of Naval Architects of Korea, 52(4), pp.338-348.   DOI
14 Van, S.H. Kim, W.J. Yim, G.T. Kim, D.H. & Lee, C.J., 1998. Experimental investigation of the flow characteristics around practical hull forms. Proc. of the 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow and Hull Form Design, Osaka, Japan, 25-27 May 1998, pp. 215-227.
15 Yang, J.M. & Kim, H.C., 2005. Prediction of propulsive performance of VLCC at heeled and trimmed conditions. Journal of the Society of Naval Architects of Korea, 42(2), pp.307-314.   DOI