Mitigation Method of Shaft Voltage Based on the Variation of Parasitic Capacitance |
Im, Jun-Hyuk
(Dept. of Electrical Engineering, Incheon National University)
Park, Jun-Kyu (Dept. of Electrical Engineering, Incheon National University) Lee, Seung-Tae (Dept. of Electrical Engineering, Incheon National University) Jeong, Chae-Lim (Dept. of Electrical Engineering, Incheon National University) Hur, Jin (Dept. of Electrical Engineering, Incheon National University) |
1 | M. Kimiabeigi, J. D. Widmer, R. Long, Y. Gao, J. Goss, R. Martin, T. Lisle, J. M. Soler Vizan, A. Michaelides, and B. Mecrow, "High-performance low-cost electric motor for electric vehicles using ferrite magnets," IEEE Trans. Ind. Electron., vol. 63, no. 1, Jan. 2016. |
2 | W. Cao, B. C. Mecrow, G. J. Atkinson, J. W. Bennett, and D. J. Atkinson, "Overview of electric motor technologies used for more electric aircraft (MEA)," IEEE Trans. Ind. Electron., vol. 59, no. 9, Sep. 2012. |
3 | J. K. Park and J. Hur, "Detection of inter-turn and dynamic eccentricity faults using stator current frequency pattern in IPM-type BLDC motors," IEEE Trans. Ind. Electron., vol. 63, no. 3, Mar. 2016. |
4 | J. K. Park, C. L. Jeong, S. T. Lee, and J. Hur, "Early detection technique for stator winding inter-turn fault in BLDC motor using input impedance," IEEE Trans. Ind. Appl., vol. 51, no. 1, Jan./Feb. 2015. |
5 | R. Singleton II, E. Strangas, and S. Aviyente, "The use of bearing currents and vibrations in lifetime estimation of bearings," IEEE Trans. Ind. Inf., vol. 13, no. 3, Jun. 2017 |
6 | V. Niskanen, A. Muetze, and J. Ahola, "Study on bearing impedance properties at several hundred kilohertz for different electric machine operating parameters," IEEE Trans. Ind. Appl., vol. 50, no. 5, Sep./Oct. 2014. |
7 | J. K. Park, T. Wellawatta, S. Choi, and J. Hur "Mitigation method of the shaft voltage according to parasitic capacitance of the PMSM," IEEE Trans. Ind. Appl., vol. 53, no. 5, Sep/Oct 2017. |
8 | A. Muetze and A. Binder, "Calculation of circulating bearing currents in machines of inverter-based drive systems," IEEE Trans. Ind. Electron., vol. 54, no. 2, Apr. 2007. |
9 | U. T. Shami and H. Akagi, "Identification and discussion of the origin of a shaft end-to-end voltage in an inverter-driven motor," IEEE Trans. Power Electron., vol. 25, no. 6, pp. 1615-1625, JUN. 2010. DOI |
10 | J. K. Park, T. Wellawatta, Z. Ullah, and J. Hur, "New equivalent circuit of the IPM-type BLDC motor for calculation of shaft voltage by considering electric and magnetic fields," IEEE Trans. Ind. Appl., vol. 52, no. 5, Sep./Oct. 2016. |
11 | A. Muetze, and A. Binder "Don't lose your bearings," IEEE Ind. Appl. Magazine, vol. 12, no. 4, Jul/Aug. 2006. |
12 | J. Adabi, A. A. Boora, F. Zare, A. Nami, A. Ghosh, and F. Blaabjerg, "Common-mode voltage reduction in a motor drive system with a power factor correction," IET Power Electronics, vol. 5, no. 3. Aug. 2011. |
13 | A. Muetze and H. W. Oh "Design aspects of Conductive Microfiber Rings for Shaft-Grounding Purposes," IEEE Trans. Ind. Electron., vol. 44, no. 6, Apr. 2008. |