Browse > Article
http://dx.doi.org/10.5370/KIEE.2014.63.9.1212

Development of the Integrated Power Converter for the Environmentally Friendly Vehicle and Validation of the LDC using Battery HILS  

Kim, Tae-Hoon (Electronic System R&D Center, Korea Automotive Technology Institute)
Song, Hyun-Sik (Electronic System R&D Center, Korea Automotive Technology Institute)
Lee, Baek-Haeng (Automotive Convergence Parts Technology R&D Division, Korea Automotive Technology Institute)
Lee, Chan-Song (Power Electrics R&D Center, PNE SOLUTION Co., LTD.)
Kwon, Cheol-Soon (Power Electrics R&D Center, PNE SOLUTION Co., LTD.)
Jung, Do-Yang (Power Electrics R&D Center, PNE SOLUTION Co., LTD.)
Publication Information
The Transactions of The Korean Institute of Electrical Engineers / v.63, no.9, 2014 , pp. 1212-1218 More about this Journal
Abstract
For OBC (On-Board Charger) and LDC (Low DC-DC Converter) used as essential power conversion systems of PHEV (Plug-in Hybrid Electric Vehicle), system performance is required as well as reliability, which is need to protect the vehicle and driver from various faults. While current development processor is sufficient for embodying functions and verifying performance in normal state during development of prototypes for OBC and LDC, there is no clear method of verification for various fault situations that occur in abnormal state and for securing stability of vehicle base, unless verification is performed by mounting on an actual vehicle. In this paper, a CCM (Charger Converter Module) was developed as an integrated structure of OBC and LDC. In addition, diverse fault situations that can occur in vehicles are simulated by a simulator to artificially inject into power conversion system and to test whether it operates properly. Also, HILS (Hardware-in-the-Loop Simulation) is carried out to verify whether LDC is operated properly under power environment of an actual vehicle.
Keywords
CCM(Charger Converter Module); OBC(On-Board Charger); LDC(Low DC-DC Converter); PHEV(Plug-in Hybrid Electric Vehicle); HILS(Hardware-In-the-Loop Simulation); Fault insertion;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 G.-M. Kim et al., "Development of Integrated Power Converter Device for the NEV", in Proceedings of the Korean Institute of Power Electronics 2011 Autumn Conference, pp. 239-240, Nov. 2011.
2 G.-M. Kim, T.-K. Kim and C.-H. Kang, "Development of On Board Charger for NEV's Integrated Power Converter", in Proceedings of the Korean Institute of Power Electronics 2012 Conference, pp. 1-2, July. 2012.
3 Y.-J. Lee, Alireza Khaligh and Ali Emadi, "Advanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles", IEEE Transactions on Vehicular Technology, Vol. 58, No. 8, pp. 3970-3980, Oct. 2009.   DOI   ScienceOn
4 J.-G. Cho, C.-Y. Jeong, H.-S. Lee and G.-H. Rim, "Novel Zero-Voltage-Transition Current-Fed Full-Bridge PWM Converter for Single-Stage Power Factor Correction", IEEE Transactions on Power Electronics, Vol. 13, No. 6, pp. 1005-1012, Nov. 1998.
5 H.-S. Song et al., "Verification of Battery System Model for Environmentally Friendly Vehicles Using a Battery Hardware-in-the-loop Simulation", IET Power Electronics, Vol. 6, Iss. 2, pp. 417-424, 2013.   DOI   ScienceOn
6 Niu Liyong, Jiang Jiuchun and Zhang Weige, "Study on Optimum Design Procedure of Charger Based on Full-Bridge Phase-Shifted ZVZCS Converter", in Proceedings of IEEE VPPC 2008 Conference, Harbin, China, Sep. 2008.
7 Kutkut, N.H. and Luckjiff, G., "Current mode control of a full bridge dc to dc converter with a two inductor rectifier", in Proceedings of IEEE PESC 1997 Conference, St. Louis, USA, Jun. 1997.
8 T.-H. Kim, S.-J. Lee and W. Choi, "Design and Control of the Phase Shift Full Bridge Converter for the On-board Battery Charger of Electric Forklifts", Journal of Power Electronics, Vol. 12, Iss. 1, pp. 113-119, Jan. 2012.   과학기술학회마을   DOI   ScienceOn