1 |
J. D. Zook, et. al.,"Characteristics of Polysilicon Resonant Microbeams", Sensors and Actuators, A 35, 51-9, 1992.
DOI
ScienceOn
|
2 |
M. Bao, et. al.,"Energy Transfer Model for Squeeze-film Air Damping in Low Vacuum", J. Micromech. Microeng., 12 341-6, 2002.
DOI
ScienceOn
|
3 |
Puneet Sharma, Amitabh Verma, R.K. Sidhu, O.P. Pandey, "Process parameter selection for strontium ferrite sintered magnets using Taguchi L9 orthogonal design," J.Materials Processing Technology, Vol. 168, pp. 147-151, 2005.
DOI
ScienceOn
|
4 |
Park, S. H., "Morden Design of Experiments", Minyongsa, pp. 305-329, 2001.
|
5 |
J. Yang, et.al., "Energy dissipation in Submicrometer Thick Single-Crystal Silicon cantilevers",J.Microelectrochem.Syst. 11(6) pp. 775-783, 2002.
DOI
ScienceOn
|
6 |
J. Yang, et. al., "Energy dissipation in Submicrometer Thick single-Crystal Silicon Cantilevers" J. Microelectrochem. Syst.11(6) pp. 775-783, 2002.
DOI
ScienceOn
|
7 |
H. Chen, et. al, "An investigation into the characteristics of deep reactive ion etching of quartz using SU-8 as a mask", J.Micromech.microeng. vol 18, pp.1-8 , 2008
|
8 |
C. Zener, "Internal friction in solids II: General theory of thermoelastic internal friction," Phys. Rev., vol. 53, pp. 90-99, 1938.
DOI
|
9 |
Kubena et. al., 2007 US Patent, us2007/0017287 A1.
|
10 |
D. Chang, et. al., "Optimized DRIE etching of ultra-small quartz resonators," Proceedings of the 2003 IEEE International Frequency Control Symposium, pp. 829-832, 2003. Circuits," ACM/IEEE Design Automation Conf., pp. 12-17, 1994.
|
11 |
A. Partridge, J. McDonald " Silicon MEMS Oscillators to Replace Quartz Cristals", SiTime corporation's technical paper, 2006.
|
12 |
Da Zhang and Mark J.Kushner , "investigations of surface reactions during C2F6 Plasma etching of SiO2 with equipment and feature scale models", J. Vac. Sci. Technol. A 19(2), Mar/Apr 2001 pp 524-538.
DOI
ScienceOn
|
13 |
H. -K. Jung et al., "Silicon/Quartz bonding for Quartz Deep RIE for the Fabrication of Quartz resonator structures" Proc. IEEE NEMS, pp. 1172-1175, 2008.
|