1 |
Park, H.G., Malen, J.A., Piggott, W.T., Morse, J.D., Grief, R., Grigoropoulos, C.P., Havstad, M.A. and Upadhye, R., 2006, "Methanol Steam Reformer on a Silicon Wafer," J. Microelectromech. Syst. 15, pp. 976-985.
DOI
ScienceOn
|
2 |
Yuan, J., Ren, F. and Sunden, B., 2007, "Analysis of Chemical-reaction-coupled Mass and Heat Transport Phenomena in a Methane Reformer Duct for PEMFC," Int. J. Heat Mass Transfer 50, pp. 687-701.
DOI
ScienceOn
|
3 |
Lee, M.T., Grief, R., Grigoropoulos, C.P., Park, H.G. and Hsu, F.K., 2007, "Transport in Packed-bed and Wall-coated Steam-methanol Reformers," J. Power Sources 166, pp. 194-201.
DOI
ScienceOn
|
4 |
Schmidt, L.D., 2005, "The Engineering of Chemical Reactions," Oxford University Press, New York.
|
5 |
Hill, C.G., 1977, "An Introduction to Chemical Engineering Kinetics and Reactor Design," John Wiley and Sons.
|
6 |
Mills, A.F., 2001, Mass Transfer, Prentice Hall, Upper Saddle River, N.J..
|
7 |
Mills, A.F., 1999, Heat Transfer, Prentice Hall, Upper Saddle River, N.J..
|
8 |
Wilke, C.R., 1950, "A Viscosity Equation for Gas Mixtures," J. Chem. Phys. 18, pp. 517-519.
DOI
|
9 |
Nield, D.A. and Bejan, A., 2006, "Convection in Porous Media," Springer Science-Business Media, New York.
|
10 |
Vargaftik, N.B., 1975, Tables of Thermophysical Properties of Liquids and Gases, McGraw-Hill, New York.
|
11 |
Incropera, F.P., Dewitt, D.P., 2002, Fundamentals of Heat and Mass Transfer, John Wiley and Sons.
|
12 |
Touloukian, Y.S., 1970, Thermal Conductivity: Nonmetallic Solids, IFI/Plenum, New York.
|
13 |
Suh, J.S., Lee, M.T., Grief, R. and Grigoropoulos, C.P., 2007, "A Study of Steam Methanol Reforming in a Microreactor," J. Power Sources, Vol. 173, pp.458-466.
DOI
ScienceOn
|
14 |
Suh, J.S., Lee, M.T., Grief, R. and Grigoropoulos, C.P., 2008, "Transport Phenomena in a Steam Methanol Reforming Microreactor with Internal Heating," Int. J. Hydrogen Energy, in press.
|
15 |
Karki, K.C. and Patankar, S.V., 1988, "Calculation Procedure for Viscous Incompressible Flows in Complex Geometries," Numerical Heat Transfer, Vol. 14, pp. 295-307.
|
16 |
Patankar, S.V., 1980, Numerical Heat Transfer and Fluid Flow, Hemisphere,Washington, DC.
|
17 |
Liao, C. and Erickson, P.A., 2008, "Characteristic Time as a Descriptive Parameter in Steam Reformation Hydrogen Production Processes," International Journal of Hydrogen Energy pp.1652-1660.
|
18 |
Amphlett, J.C., Creber, K.A.M., Davis, J.M., Mann, R.F., Peppley, B.A. and Stokes, D.M., 1994, "Hydrogen-production by Steam Reforming of Methanol for Polymer Electrolyte Fuel-cells," Int. J. Hydrogen Energy 19, pp. 131-137.
DOI
ScienceOn
|
19 |
Ghenciu, A.F., 2002, "Review of Fuel Processing Catalysts for Hydrogen Production in PEM Fuel Cell Systems," Curr. Opin. Solid State Mater. Sci. 6, pp. 389-399
DOI
ScienceOn
|
20 |
Brown, L.F., 2001, "A Comparative Study of Fuels for On-board Hydrogen Production for Fuel-cell-powered Automobiles," Int. J. Hydrogen Energy 26, pp. 381-397.
DOI
ScienceOn
|
21 |
Peppley, B.A., Amphlett, J.C., Kearns, L.M. and Mann, R.F., 1999, "Methanol-steam Reforming on Cu/ZnO/ - Part 1: The Reaction Network," Appl. Catal. 179, pp. 21-29.
DOI
ScienceOn
|
22 |
Peppley, B.A., Amphlett, J.C., Kearns, L.M. and Mann, R.F., 1999, "Methanol-steam Reforming on Cu/ZnO/ Catalysts - Part 2: A Comprehensive Kinetic Model," Appl. Catal. A-Gen.179, pp. 31-39.
DOI
ScienceOn
|
23 |
Agrell, J., Birgersson, H. and Boutonnet, M., 2002, "Steam Reforming of Methanol Over a Cu/ZnO/ Catalyst: A Kinetic Analysis and Strategies for Suppression of CO Formation," J. Power Sources 106, pp. 249-257.
DOI
ScienceOn
|
24 |
Lee, J.K., Ko, J.B. and Kim, D.H., 2004, "Methanol Steam Reforming Over Cu/ZnO/ Catalyst: Kinetics and Effectiveness Factor," Appl. Catal. A-Gen. 278, pp. 25-35.
DOI
ScienceOn
|
25 |
Choi, Y.T. and Stenger, H.G., 2005, "Kinetics, Simulation and Optimization of Methanol Steam Reformer for Fuel Cell Applications," J. Power Sources 142, pp. 81-91.
DOI
ScienceOn
|
26 |
Park, H.G., Lee, M.T., Hsu, F.K., Grigoropoulos, C.P. and Grief, R., 2004, "Transport in a Methanol Steam Reformer as the Fuel Processor for Fuel Cell Systems," Proc. IMECE 2004, pp. 1-7.
|
27 |
Karim, A., Bravo, J. and Datye, A., 2005, "Nonisothermality in Packed Bed Reactors for Steam Reforming of Methanol," Appl. Catal. A: Gen. 282, pp. 101-109.
DOI
ScienceOn
|