1 |
Webb, R. L. and Iyengar, A., 2001, "Oval Finned Tube Condenser and Design Pressure Limits," J. Enhanced Heat Transfer, Vol. 8, pp. 147-158.
DOI
|
2 |
Kim, N.-H. and Kim, S.-H., 2010, "Dry and Wet Air- Side Performance of a Louver-Finned Heat Exchanger Having Flat Tubes," Journal of Mechanical Science and Technology, Vol. 24, pp. 1553-1561.
과학기술학회마을
DOI
ScienceOn
|
3 |
Collier, J. G. and Thome, J. R., 1994, Convective Boiling and Condensation, 3rd edition, Oxford University Press.
|
4 |
Ghiaansiaan, M. S., 2008, Two-Phase Boiling and Condensation in Conventional and Miniature Systems, Cambridge University Press.
|
5 |
Wilson, M. J., Newell, T. A., Chato, J. C. and Infante Ferreira, C. A., 2003, "Refrigerant Charge, Pressure Drop, and Condensation Heat Transfer in Flattened Tubes," Int. J. Refrigeration, Vol. 26, pp. 442-451.
DOI
ScienceOn
|
6 |
Kim, M.-H., Shin, J. S. and Bullard, C. W., 2001, "Heat Transfer and Pressure Drop Characteristics during R-22 Evaporation in an Oval Microfin Tube," J. Heat Transfer, Vol. 123, pp. 301-308.
DOI
ScienceOn
|
7 |
Moreno Quiben, J., Cheng, L., da Silva Lima, R. J. and Thome, J. R., 2009, "Flow Boiling in Horizontal Flatten Tubes: Part I - Two-Phase Frictional Pressure Drop Results and Model," Int . J. Heat Mass Transfer, Vol. 52, pp. 3634-3644.
DOI
ScienceOn
|
8 |
Moreno Quiben, J., Cheng, L., da Silva Lima, R. J. and Thome, J. R., 2009, "Flow Boiling in Horizontal Flatten Tubes: Part II - Flow Boiling Heat Transfer Results and Model," Int . J. Heat Mass Transfer, Vol. 52, pp. 3645-3653.
DOI
ScienceOn
|
9 |
Nasr, M., Akhavan-Behabadi, M. A. and Marashi, S. E., 2010, "Performance Evaluation of Flattened Tube in Boiling Heat Transfer Enhancement and Its Effect on Pressure Drop," Int. Comm. Heat Mass Transfer, Vol. 37, pp. 430-436.
DOI
ScienceOn
|
10 |
Kim, N.-H., Park, J.-H. and Cha, S.-J., 2010, "Condensation Heat Transfer and Pressure Drop in Flat Tubes with Different Aspect Ratios," Trans. Korean Soc. Mech. Eng. B, Vol. 34, pp. 1111-1119.
과학기술학회마을
DOI
ScienceOn
|
11 |
ANSYS 12, 2010, ANSYS Inc.,
|
12 |
Kim, N.-H., Cho, J.-P. and Youn, B., 2003, "Condensation of R-22 and R-410A in Flat Aluminum Extruded Tubes," Int. J. Refrigeration, Vol. 26, pp. 830-839.
DOI
ScienceOn
|
13 |
Wilson, E. E., 1915, "A Basis for Rational Design of Heat Transfer Apparatus," Trans. ASME, Vol. 37, pp. 47-70.
|
14 |
Kline S. J., McClintock, F. A., 1953, "The Description of Uncertainties in Single Sample Experiments," Mechanical Engineering, Vol. 75, pp. 3-9.
|
15 |
Yang, C. Y. and Webb, R. L., 1996, "Friction Pressure Drop of R-12 in Small Hydraulic Diameter Extruded Aluminum Tubes with and Without Micro- Fins," Int. J. Heat Mass Transfer, Vol. 39, pp.801-809.
DOI
ScienceOn
|
16 |
Yang, C. Y. and Webb, R. L., 1996, "Condensation of R-12 in Small Hydraulic Diameter Extruded Aluminum Tubes with and Without Micro-Fins," Int. J. Heat Mass Transfer, Vol. 39, pp.791-800.
DOI
ScienceOn
|
17 |
Webb, R. L. and Kim, N. H., 2005, Principles and Enhanced Heat Transfer, Ch. 12, 2nd edition, Taylor and Francis Pub.
|
18 |
Shah, M. M., 1982, "Chart Correlation for Saturated Boiling Heat Transfer: Equations and Further Study," ASHRAE Trans., Vol. 88, Pt. 1, pp. 185-196.
|
19 |
Gungor, K. E. and Winterton, R. H .S., 1987, "Simplified General Correlations for Saturated Flow Boiling and Comparisons of Correlations with Data," Canadian J. Chemical Eng., Vol. 65, Nol. 1, pp. 148-156.
DOI
ScienceOn
|
20 |
Kandlikar, S. G., 1990, "A General Correlation for Two-Phase Boiling Heat Transfer Coefficient Inside Horizontal and Vertical Tubes," J. Heat Transfer, Vol. 112, pp. 219-228
DOI
|
21 |
Cornwell, K. and Kew, P. A.,1993, "Boiling in Small Parallel Channels," Proceedings of CEC Conf. on Energy Efficiency in Process Technology, Elsevier Applied Sciences, pp. 624-638.
|
22 |
Taitel, Y. and Dukler, A. E., 1976, "A Model for Predicting Flow Regime Transitions in Horizontal and Near Horizontal Gas-Liquid Flow," AIChE J., Vol. 22, pp. 47-55.
DOI
ScienceOn
|
23 |
Zivi, S. M., 1964, "Estimation of Steady-State Steam Void Fraction by Means of the Principle of Minimum Entropy Production," J. Heat Transfer, Vol. 86, pp. 247-252.
DOI
|
24 |
Jung, D. S. and Radermacher, R., 1989, "Prediction of Pressure Drop During Horizontal Annular Flow Boiling of Pure and Mixed Refrigerants," Int. J. Heat Mass Transfer, Vol. 32, No. 12, pp. 2435-2446
DOI
ScienceOn
|
25 |
Muller-Steinhagen, H. and Heck, K., 1986, "A Simple Friction Pressure Drop Correlation for Two- Phase Flow in Pipes," Chem. Eng. Processing, Vol. 20, pp. 297-308
DOI
ScienceOn
|
26 |
Friedel, L., 1979, "Improved Pressure Drop Correlations for Horizontal and Vertical Two-Phase Pipe Flow," 3R Int., Vol. 18, pp. 485-492.
|