Browse > Article
http://dx.doi.org/10.3795/KSME-B.2012.36.6.625

Study on Flooding Phenomena at Various Stoichiometries in Transparent PEM Unit Fuel Cell  

Nam, Ki-Hoon (Dept. of Mechanical Engineering, Korea Univ.)
Byun, Jae-Ki (Dept. of Mechanical Engineering, Korea Univ.)
Choi, Young-Don (Dept. of Mechanical Engineering, Korea Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.36, no.6, 2012 , pp. 625-632 More about this Journal
Abstract
The objective of this paper is to demonstrate the cathode channel flooding effects at different stoichiometries in proton exchange membrane (PEM) fuel cells by using visualization techniques. The phenomena of liquid water formation and removal caused by current variations were also examined experimentally. Tests were conducted at cathode stoichiometries of 1.5 and 2.0, and the anode stoichiometry was fixed at 1.5. It is found that at an air-side stoichiometry of 2.0, liquid water begins to form and the flooding occurs faster than at an air-side stoichiometry of 1.5. Also, when the air-side stoichiometry of 1.5 is maintained, the dry-out phenomena is observed in the dry-out area 7.8 A following the field of flooding. Thus, a stoichiometry of 1.5 produced better performance in terms of membrane electrode assembly (MEA) durability and hydrogen ion conductivity than did a stoichiometry of 2.0, in which dry-out occurs beyond 8A.
Keywords
PEMFC; Cathode; Flooding; Stoichiometry; Visualization;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Ye, S., Vijh, A. K. and Dao, L. H., 1992, "A New Fuel Cell Electrocatalyst Based on Highly Porous Carbonized Polyacrylonitrile Foam with Very Low Platinum Loading," J. Electrochem. Soc., Vol .143, pp.7-9.
2 Antolini, E., 2003, "Formation of carbonsupported PtM Alloys for Low Temperature Fuel Cells: a review," Mater. Chem. Phys., Vol. 78, pp. 563-573.   DOI   ScienceOn
3 Viral, M. and Smith, C. J., 2003, "Review and Analysis of PEM Fuel Cell Design and Manufacturing," J. Power Sources, Vol. 114, pp. 32-53.   DOI   ScienceOn
4 Natarajan, D. and Nguyen, T. V., 2001, "A Two-Dimensional, Two-Phase, Multicomponent, Transient Model for the Cathode of a Proton Exchange Membrane Fuel Cell Using Conventional Gas Distributors," J. Electrochem. Soc., Vol. 148, No. 12, pp. A1324-A1335.   DOI   ScienceOn
5 Chalk, S. G., Milliken, J. A. and Miller, J. F., 1998, "The US Department of Energy Investing in Clean Transport," J. Power Sources, Vol. 71, pp. 26-35.   DOI   ScienceOn
6 Tatiana, J. P., Ernesto, F. and Gonzalez, R., 2001, "Effect of Membrane Characteristics and Humidification Conditions on the Impedance Response of Polymer Electrolyte Fuel Cells," J. Electroanal Chem., Vol. 503, pp. 57-68.   DOI   ScienceOn
7 Mehta, V. and Cooper, J. S., "Review and Analysis of PEM Fuel Cell Design and Manufacturing," J. Power Sources, Vol. 114, pp. 32-53.
8 Liu, R. X., Iddir, H. and Fan, Q. B., 2000, "Potential-Dependent Infrared Absorption Spectroscopy of Adsorbed CO and X-ray Photoelectron Spectroscopy of Arc-Melted Single-Phase Pt, PtRu, PtOs, PtRuOs, and Ru Electrodes," J. Phys. Chem., Vol. 104, pp. 3518-3531.   DOI   ScienceOn
9 Tuber, K., Pocza, D. and Hebling, C., 2003, "Visualization of Water Buildup in the Cathode of a Transparent PEM Fuel Cell," J. Power Sources, Vol. 144, pp. 403-414.
10 Hakenjos, A., Muenter, H., Wittstadt, U. and Hebling, C., 2004, "A PEM Fuel Cell for Combined Measurement of Current and Temperature Distribution, and Flow Field Flooding," J. Power Sources, Vol. 131, pp. 213-216.   DOI   ScienceOn
11 Yang, X. G., Zhang, F. Y., Lubawy, A. L. and Wang, C. Y., 2004, "Visualization of Liquid Water Transport in a PEFC," Electrochem. Solid-State Lett., Vol. 7, No. 11, pp. A408-A411.   DOI   ScienceOn
12 Barbir, F., 2005, "PEM Fuel Cells Theory and Practice," Elsevier Academic Press, USA.
13 Paquin, M. and Frechette, L. G., 2008, "Understanding Cathode Flooding and Dry-out for Water Management in Air Breathing PEM Fuel Cells," J. Power Sources, Vol. 180, pp. 440-451.   DOI   ScienceOn
14 Kuo, J. K. and Chen, C. K., 2007, "The Effects of Buoyancy on the Performance of a PEM Fuel Cell with a Wave-like Gas Flow Channel Design by Numerical Investigation," Int. J. Heat and Mass Transfer, Vol. 50, pp. 4166-4179.   DOI   ScienceOn
15 Li, X. and Sabir, I., 2005, "Review of Bipolar Plates in PEM Fuel Cells: Flow-field designs," Int. J. of Hydrogen energy, Vol. 30, pp. 359-371.   DOI   ScienceOn
16 Su, A., Chiu, Y. C and Weng, F. B., 2005, "The Impact of Flow Field Pattern on Concentration and Performance in PEMFC," Int. J. Energy Res., Vol. 29, pp. 409-425.   DOI   ScienceOn
17 Yoon, Y. G., Lee, W. Y., Park, G. G., Yang, T. H. and Kim C. D., 2004, "Effects of Channel Configurations of Flow Field Plates on the Performance of a PEMFC," Electrochimica Acta, Vol. 50, pp. 709-712.   DOI   ScienceOn
18 Kuo, J. K., Yen, T. S. and Chen, C. K., 2008, "Improvement of Performance of Gas Flow Channel in PEM Fuel Cells," Energy Conversion and Management, Vol. 49, pp. 2776-2787.   DOI   ScienceOn
19 Kuo, J. K., Yen, T. H. and Chen, C. K., 2008, "Three-Dimensional Numerical Analysis of PEM Fuel Cells with Straight and Wave-like Gas Flow Fields Channels," J. Power Sources, Vol. 177, pp. 96-103.   DOI   ScienceOn