Browse > Article
http://dx.doi.org/10.3795/KSME-B.2009.33.1.60

Numerical Study on Operating Parameters and Shapes of a Steam Reformer for Hydrogen Production from Methane  

Park, Joong-Uen (KAIST 기계공학과)
Lee, Shin-Ku (KAIST 기계공학과)
Lim, Sung-Kwang (KAIST 기계공학과)
Bae, Joong-Myeon (KAIST 기계공학과)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.33, no.1, 2009 , pp. 60-68 More about this Journal
Abstract
The steam reformer for hydrogen production from methane is studied by a numerical method. Langmuir- Hinshelwood model is incorporated for catalytic surface reactions, and the pseudo-homogeneous model is used to take into account local equilibrium phenomena between a catalyst and bulk gas. Dominant chemical reactions are Steam Reforming (SR) reaction, Water-Gas Shift (WGS) reaction, and Direct Steam Reforming (DSR) reaction. The numerical results are validated with experimental results at the same operating conditions. Using the validated code, parametric study has been numerically performed in view of the steam reformer performance. As increasing a wall temperature, the fuel conversion increases due to the high heat transfer rate. When Steam to Carbon Ratio (SCR) increases, the concentration of carbon monoxide decreases since WGS reaction becomes more active. When increasing Gas Hourly Space Velocity (GHSV), the fuel conversion decreases due to the heat transfer limitation and the low residence time. The reactor shape effects are also investigated. The length and radius of cylindrical reactors are changed at the same catalyst volume. The longer steam reformer is, the better steam reformer performs. However, system energy efficiency decreases due to the large pressure drop.
Keywords
Steam Reforming Reaction; Hydrogen Production; Fuel Cell; Catalyst Surface Reaction;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 4
연도 인용수 순위
1 Lee, S., Lim, S. and Bae, J., 2006, “Heat and Mass Transfer Characteristics in Steam Reforming Reactor,” J. KSNRE, Vol. 2, No. 4, pp. 56-63   과학기술학회마을
2 Chu, H.S., Wang, C.P., Liao, W.C. and Yan, W.M., 2005, “Transient Behavior of CO Poisoning of the Anode Catalyst Layer of a PEM Fuel Cell,” J. Power Source, Vol. 142, No. 2, pp. 1071-1077   DOI   ScienceOn
3 Kang, I., 2007, “Study on Performance of Diesel Autothermal Reformer for Solid Oxide Fuel Cell,” KAIST, Daejeon, KOREA
4 Choi, Y. and Stenger, H.G., 2005, “Kinetics, Simulation and Optimization of Methanol Steam Reformer for Fuel Cell Application,” J. Power Source, Vol. 142, No. 2, pp. 81-91   DOI   ScienceOn
5 O'Hayre, R., Cha, S-W., Colella, W. and Prinz, F.B., 2006, “Fuel Cell Fundamentals,” John Wiley & Sons, pp. 292-306
6 Larminie, J. and Dicks, A., 2003, “Fuel Cell System Explained, Second Edition,” John Wiley & Sons, pp. 229-279
7 Hoang, D.L., Chan, S.H. and Ding, O.L., 2005, “Kinetic and Modeling Study of Methane Steam Reforming over Sulfide Nickel Catalyst on a Gamma Alumina Support,” Chemical Engineering J., Vol. 112, No. 1/3, pp. 1-11   DOI   ScienceOn
8 Seo. Y.-S., Seo, D.-J., Seo, Y.-T. and Yoon, W.-L., 2006, “Investigation of the Characteristics of a Compact Steam Reformer Integrated with a Water-Gas Shift Reactor,” J. Power Source, Vol. 161, No. 2, pp. 1208-1216   DOI   ScienceOn
9 Xu, J. and Froment, G. F., 1989, “Methane Steam Reforming, Methanation and Water-Gas Shift I. Intrinsic Kinetics,” J. of AiChE., Vol. 35, No. 1, pp. 88-96   DOI   ScienceOn
10 Lee, S., 2008, “Numerical Analysis of Fuel Reforming Systems for Efficient Hydrogen Production,” KAIST, Daejeon, KOREA
11 CD adapco Group, 2004, “STAR-CD Methodology,” CD adapco Group, pp. 1-1-1-7
12 Park, J., Lee, S., Lim, S. and Bae, J., “Numerical Study on Correlation Between Operating Parameters and Reforming Efficiency for a Methane Autothermal Reformer,” J. KSME-B, Vol. 32, No. 8, pp. 612-620
13 Niven, R. K., 2002, “Physical Insight into the Ergun and Wen&Yu Equations for Fluid Flow in Packed and Fluidized Beds,” J. of Chemical Engineering Science, Vol. 57, No. 3, pp. 527-534   DOI   ScienceOn
14 Lee, S., Bae, J., Lim, S. and Park, J., 2008, “Improved Configuration of Supported Nickel Catalysts in a Steam Reformer for Effective Hydrogen Production from Methane,” J. Power Source, Vol. 180, No. 1, pp. 506-515   DOI   ScienceOn
15 Larminie, J. and Dicks, A., 2003, “Fuel Cell System Explained, Second Edition,” John Wiley & Sons, pp. 207-228