Browse > Article
http://dx.doi.org/10.3795/KSME-B.2009.33.10.757

Local Heat Transfer Characteristics on Fin Surface of Plate Fin-Oval Tube with Delta Wing Vortex Generators  

Shin, Seok-Won (영남대학교 기계공학부)
Chung, In-Kee (영남대학교 기계공학부)
Kim, Soo-Youn (영남대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.33, no.10, 2009 , pp. 757-766 More about this Journal
Abstract
In the present study, the effect of delta-wing vortex generators(DWVG) on the local heat transfer of the plate fin-oval tube was experimentally analyzed for Reynolds numbers for 2000, 2500 and 3200. The local heat transfer coefficient of the fin surface for four type DWVGs was measured by the naphthalene sublimation technique. As the results, the distribution of the heat transfer coefficient at rear of DWVGs showed longitudinal contours for common flow down DWVGs and wavy contours for common flow up DWVGs. The distribution showed many cell type contours at near wall and downstream for all DWVGs. Compared to case without DWVGs in present experimental tests, all DWVGs showed the best enhancement of heat transfer at Re=2000. Of 4 cases of DWVGs, D type showed the best enhancement of heat transfer.
Keywords
Delta Wing Vortex Generator; Oval Tube; Heat Transfer Enhancement; Naphthalene Sublimation Technique;
Citations & Related Records

Times Cited By SCOPUS : 0
연도 인용수 순위
  • Reference
1 Cho, K., Irvine, T. F. and Karni, J., 1992, 'Measurement of the Diffusion Coefficient of Naphthalene into Air,' Int. J. Heat Mass Transfer, Vol. 35, No. 4, pp. 957-996   DOI   ScienceOn
2 Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
3 Edwards, F.J. and Alker, C. Jr., 1974, 'The Improvement of Forced Convection Surface Heat Transfer Using Surface Protrusions In the Form of (A) Cubes and (B) vortex Generators,' Proceedings of the 5th Int. Heat Transfer Conference, Vol. 2, pp. 244-248
4 Russell, C. M. B., Jones, T. V. and Lee, G.H., 1982, 'Heat Transfer Enhancement Using Vortex Generators,' 7th Int. Heat Transfer Conference., New York, Vol .2 , pp. 283-288
5 Fiebig, M., Valencia, A. and Mitra, N. K., 1993, 'Wing-Type Vortex Generators for Fin and Tube Heat Exchangers,' Experimental Thermal and Fluid Science, Vol. 7, pp. 287-295   DOI   ScienceOn
6 Biswas G., Fiebig, M. Mitra, N. K., 1994, 'Heat Transfer Enhancement in Fin-Tube Heat Exchangers by Winglet type Vortex Generators,' Int. J. Heat Mass Transfer, Vol.37, No. 2, pp. 283-291   DOI   ScienceOn
7 Sogin, H. H., 1958, 'Sublimation From Disks to Air Streams Flowing Normal to Their Surface,' Trans. ASME, Vol. 80, NO. 1, pp. 61-69
8 Oyakawa, K., Shinzato, T. and Mabuchi, I.,1986, 'Effect of Heat Transfer Augmentation of some Geometric Shapes of a Turbulence Promoter in a Rectangular Duct,' Bulletin of JSME, Vol.29, No. 256 pp. 3415-3420   DOI   ScienceOn
9 Eibeck, P. A. and Eaton, J. K., 1987, 'Heat Transfer Effects of a Longitudinal Vortex Embedded in Turbulent Boundary Layer,' Trans. ASME, J. of Heat Transfer, Vol. 109, No. 1, pp. 16-24   DOI
10 Kim, M. S., Baek, B. J., Pak, B. C., 2000, 'An Experimental Study of Fouling Effect on the Heat Transfer Around a Tube in Staggered Tube Banks,' Trans. of the KSME(B), Vol. 24, No. 11, pp. 1478-1485   과학기술학회마을
11 Fiebig, M., Kallweit, P. and Mitra, N.K., 1986, 'Wing Type Vortex Generators for Heat Transfer Enhancement,' Proceeding of the 8th Int. Heat Transfer Conference, Vol.6 pp. 2909-2914