1 |
Brear, M. J. and Hodson, H. P., 2004, 'The Effect of Wake Passing on a Flow Separation in a Low-Pressure Turbine Cascade, ASME J. of Fluids Engineering, Vol. 126, pp. 250-256
DOI
ScienceOn
|
2 |
Lashminarayana, B. and Reynolds, B., 1980, 'Turbulence Characteristics in the Near Wake of a Compressor Rotor Blade,' AIAA Journal, Vol. 18, pp. 1354-1362
DOI
ScienceOn
|
3 |
Ligrani, P. M. and Bradshaw, P., 1987, 'Subminiature Hot-Wire Sensors: Development and Use,' J. of Physics. E, Vol. 20, pp. 323-332
DOI
ScienceOn
|
4 |
Prato, J. and Lashminarayana, B., 1993, 'Investigation of Compressor Rotor Wake Structure at Peak Pressure Rise Coefficient and Effects of Loading,' ASME J. of Turbomachinery, Vol. 115, pp. 487-500
DOI
|
5 |
Zhang, Q., Lee, S. W. and Ligrani, P. M., 2004, 'Effect of Surface Roughness and Free-stream Turbulence on the Wake Turbulence Structure of a Symmetric Airfoil,' Physics of Fluids, Vol. 16, No. 6, pp. 2044-2053
DOI
ScienceOn
|
6 |
Goldstein, R. J., Wang, H. P. and Jabbari, M. Y., 1995, 'The Influence of Secondary Flows Near the Endwall and Boundary Layer Disturbance on Convective Transport From a Turbine Blade,' ASME J. of Turbomachinery, Vol. 117, pp. 657-665
DOI
|
7 |
Hah, C. and Lakshminarayana, B., 1981, 'Measurement and Prediction of Mean Velocity and Turbulence Structure in the Near Wake of an Airfoil,' J. of Fluid Mech., Vol. 115, pp. 251-282
DOI
ScienceOn
|
8 |
Lee, S. W., Jun, S. B. and Park, B. K., 2001, 'Measurements of Endwall Heat (Mass) Transfer Coefficient in a Linear Turbine Cascade Using Naphthalene Sublimation Technique,' Trans. of the KSME (B), Vol. 25, pp. 356-365
|
9 |
Hinze, J. O., 1975, Turbulence, McGraw-Hill, New York
|
10 |
Lee, D. H., Sim, J. K., Park, S. B., Lee, H. H. and Yoon, S. H., 1999, 'Heat Transfer and Flow Measurement on the Turbine Blade Surface,' Trans. of the KSME (B), Vol. 23, pp. 567-576
|
11 |
Sauer, H., 1979, 'Investigations on Vortex Frequencies in Wakes of Cascade,' Proceeding of the 6th Conf, Fluid Machinery
|
12 |
Campbell, G. S., 1957, 'Turbulence in the Wake of a Thin Airfoil at Low Speeds,' NACA TM 1427
|
13 |
Sieverding, C. H. and Heinemann, H., 1990, 'The Influence of Boundary Layer State on Vortex Shedding from Flat Plates and Turbine Cascades,' ASME J. of Turbomachinery, Vol. 112, pp. 181-187
DOI
|
14 |
Cicatelli, G. and Sieverding, C. H., 1997, 'The Effect of Vortex Shedding on the Unsteady Pressure Distribution Around the Trailing Edge of a Turbine Blade,' ASME J. of Turbomachinery, Vol. 119, pp. 810-819
DOI
ScienceOn
|
15 |
Ong, L. and Wallace, J., 1996, 'The Velocity Field of the Turbulent Very Near Wake of a Circular Cylinder,' Experiments in Fluids, Vol. 20, pp. 441-453
DOI
|
16 |
Cantwell, B. and Coles, D., 1983, 'Experimental Study of Entrainment and Transport in the Turbulent Near Wake of a Circular Cylinder,' J. of Fluid Mech., Vol. 136, pp. 321-374
DOI
ScienceOn
|
17 |
Perry, A. E., Chong, M. S. and Lim, T. T., 1982, 'The Vortex-Shedding Process Behind Two-Dimensional Bluff Bodies,' J. of Fluid Mech., Vol. 116, pp. 77-90
DOI
ScienceOn
|
18 |
Han, L. S. and Cox, W. R., 1983, 'A Visual Study of Turbine Blade Pressure Side Boundary Layer,' ASME J. of Engineering for Power, Vol. 105, pp. 47-52
DOI
|
19 |
Lawaczeck, O. and Heinemann, J., 1977, 'Von Karman Vortex Street in the Wake of Subsonic and Transonic Blades,' AGARD CP-177
|
20 |
Gerrard, J. H., 1966, 'The Mechanism of the Formation Region of Vortices Behind Bluff Body,' J. of Fluid Mech., Vol. 25, pp. 401-413
DOI
|
21 |
Roshko, A., 1954, 'On the Development of Turbulent Wakes from Vortex Streets,' NACA Report 1191
|