Browse > Article
http://dx.doi.org/10.3795/KSME-A.2017.41.3.219

Rotary Bending Fatigue Characteristics According to Optimal Friction Welding of SF45 to SM45C Steel Bars  

Kong, Yu Sik (Dept. of Mechanical Engineering, Pukyong Nat'l Univ.)
Park, Young Whan (Dept. of Mechanical Engineering, Pukyong Nat'l Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.41, no.3, 2017 , pp. 219-224 More about this Journal
Abstract
A study on dissimilar friction-welded joints was performed for cam shaft applications using solid bar samples, 20mm in diameter, of forging steel(SF45) and carbon steel(SM45C). The main parameters of friction welding such as tensile tests, Vickers hardness surveys of the bond of area, the heat affected zone (HAZ), and the observation of microstructure were investigated to ensure a good quality of friction welding through visual observations. The specimens were tested as-welded and post weld heat treatment(PWHT). This paper deals with optimizing the welding conditions and analyzing various rotary bending fatigue test(RBFT) properties about heat-treated base metal(BM), as-welded and PWHT. Consequently, two materials for friction welding are strongly mixed with a well-combined structure of micro-particles without any molten material, particle growth, or any defect. Moreover, the fatigue limit of BM(SF45) and PWHT for the RBFT were observed as 180MPa and 250MPa, respectively. It was confirmed that the PWHT causes approximately 40％ improvement in the fatigue limit when compared to the BM(SF45).
Keywords
Rorary Bending Fatigue Test; Post Weld Heat Treatment; Base Metal; Welding Condition; Fatigue Limit;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Cho, H. S. and Suh, S. J., 1997, "Friction Welding of Inconel 713C and SCM440," Journal of KWS, Vol. 15, No. 6, pp. 78-84.
2 Oh, S. K., Kim, B. A., Kim, S. J. and Nam, S. H., 1988, "A Study on Friction Welding of SM45C to SCM4 Steel Bars and the Fatigue Properties," Journal of KSOE, Vol. 2, No. 2, pp. 312-321.
3 Kong, Y. S., Yoon, S. P. and Kim, S. J., 2010, "Mechanical Properties of Friction Welded SM45CSF45 Joints for Automobile Reverse Idle Gear Shaft Applications," Journal of KSME-A, Vol. 34, No. 1, pp. 85-90.
4 Kong, Y. S. and Kim, S. J., 2006, "Mechanical Properties of Dissimilar Friction Welded Steel Bars in Relation to Post Weld Heat Treatment," Trans. Korean Soc. Mech. Eng. A, Vol. 30, No. 4, pp. 402-408.   DOI
5 Suh, M. S., Fean, Y. S. and Suh, C. M., 2012, "Variation of Fatigue Properties in Nanoskinned Ti-6Al-4V-Rotating Bending and Axial Loading Tension-Compression Cycle," Trans. Korean Soc. Mech. Eng. A, Vol. 36, No. 4, pp. 443-449.   DOI
6 Oh, K. K., Kim, J. H. and Choi, H. S., 2015, "Effect of Nitriding on Fatigue Characteristics of Cr-Mo Alloy Steel," Trans. Korean Soc. Mech. Eng. A, Vol. 39, No. 6, pp. 597-602.   DOI
7 ASTM, 1981, "Statistical Analysis of Fatigue Data," ASTM-STP, p. 744.
8 Jung, H.S., Cho, J.R., Oh, J.S. Kim, E.N. Choi, S.G. and Ha, M.Y., 2010, "Inertia Friction Welding Process Analysis and Mechanical Properties Evaluation of Large Rotor Shaft in Marine Turbo Charger," International Journal of Precision Engineering and Manufacturing, Vol. 11 No. 1, pp. 83-88.
9 Sohn, H. J. and Kim, S. J., 2012, "Marco and Microscopic Observations of Fatigue Crack Growth Behavior in API2WGr.50 Steel Joints," Journal of Ocean Engineering and Technology, Vol. 26, No. 5, pp. 73-80.   DOI
10 Hanaki, S., Yamashita M. and Uchida, H., 2010, "On Stochastic Evaluation of S-N Data Based on Fatigue Strength Distribution," International Journal of Fatigue, Vol. 32, No. 3, pp. 605-609.   DOI
11 Fouchereau, R., Celeus, G. and Pamphile, P., 2014, "Probabilistic Modeling of S-N Curves," International Journal of Fatigue, No. 68, pp. 217-223.
12 Zhai., J. M. and Li, X. Y., 2012, "A Methodology to Determine a Conditional Probability Density Distribution Surface from S-N Data," International Journal of Fatigue, No. 44, pp. 107-115.
13 Castillo, E., Fermansez, Canteli, A. and Hadi, A. S., 1999, "On Fitting a Fatigue Model to Data," International Journal of Fatigue, No. 21, pp. 97-106.