Browse > Article
http://dx.doi.org/10.3795/KSME-A.2014.38.8.905

Optimization of Design Parameters for Steel Grating Using Taguchi Method Considering Rigidity and Drainage Efficiency  

Kim, Woo-Tae (Div. of Mechanical and Automotive Engineering, Kongju Nat'l Univ.)
Lee, Se-Jin (Div. of Mechanical and Automotive Engineering, Kongju Nat'l Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.38, no.8, 2014 , pp. 905-910 More about this Journal
Abstract
The steel grating discussed in this study is a drain cover that enhances the rigidity of the steel frame using an inclined inflow tract for wastewater, facilitates smooth drainage, and prevents the escape of bad smell from the drain. Recently, the urban problem of bad smell in sewerage lines has been hindering the improvement of living standards. Moreover, the frequent failure of existing products deters bad smell prevention measures and results in administrative power and budget wastage. The pressure to reduce budgets propels the increased demand for functional steel grating. Thus, this study focused on optimizing the design parameters of a steel grating by simultaneously considering its rigidity and drainage efficiency.
Keywords
Steel Grating; Finite Element Analysis; Design of Experiment; Taguchi Method;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Oh, S. K., Lee, K. K., Suh, C. H., Jung, Y-C. and Kim, Y. S., 2011, "Robust Optimization of the Solenoid Assembly in Electromagnetic Limited Differential by Considering the Uncertainties in Machining Variables," Trans. Korean Soc. Mech. Eng. A, Vol. 35, No. 10, pp. 1307-1313.   과학기술학회마을   DOI   ScienceOn
2 Oh, S. K., Suh, C. H., Jung, Y-C., Kim, D. B., Sung, J. H. and Kim, Y. S., 2008, "Optimization of design Variables of the Multi Layer Bellows Using FESimulation and Design of Experiment," Proc. Kor. Soc. Tech. Plast. Conf., pp. 277-280.
3 Park, S. H., 2006, Modern Design of Experiments, Minyoungsa, Mapo-gu Seoul-si Korea, pp.563-589.
4 Choi, W. K., Choi, S. G., Shin, H. J. and Lee, E. S., 2012, "A Study in the Optimal Machining of 12 inch Wafer Polishing by Taguchi Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 6, pp. 48-54.
5 Lee, Y., Lee, T. and Um, Y. J., 2007, "Design Guide of Steel Grating for Prevention of Flooded Area in Road," The Conference of Korean Society of Hazard Mitigation, pp. 454-457.
6 Kwon, T. H., Suh, C. H., Lee, R. G., Oh, S. K. and Jung, Y.-C., 2013, Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 12, pp. 1541-1546.   DOI   ScienceOn
7 https://controls.engin.umich.edu/wiki/index.php/Design_of_experiments_via_taguchi_methods:_orthogonal_arrays
8 Kim, S. H., Park, Y. C. and Park, J. H., 2010, "Optimization of Pre-form for Manufacturing of Automobile Crum Clutch Hub Products Using Taguchi Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 6, pp.101-108.
9 Kim, Y. S. and Park, K. C., 1996, "Sensitivity Analysis of Material and Process Variables Affecting on the Stamping Formability," Trans. Korean Soc. Mech. Eng. A, Vol. 20, No. 7, pp.2246-2256.   과학기술학회마을
10 SPS-KMIC-007-2014:2013, Korea Metal Industry Cooperative Standard, pp. 10.