Browse > Article
http://dx.doi.org/10.3795/KSME-A.2010.34.7.805

Design of Fastener for Solid Rocket Motor Using Solid CAD System  

Lee, Kang-Soo (Division of Mechanical Engineering, Hanbat Nat'l Univ.)
Kim, Won-Hoon (Div. 1-6, Agency for Defense Development)
Seok, Jung-Ho (Space Solution Co., Ltd.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.34, no.7, 2010 , pp. 805-811 More about this Journal
Abstract
When we design a product, we spend a considerable amount of time in designing fasteners and their mating parts. Fasteners have special features because of which they are widely used and well standardized. Although we use some equations to design the fasteners, we should select these fasteners from the standardized table. In order to design them quickly using the CAD system, we proceeded as follows. First, we prepared some standardized shapes of fasteners to design them automatically. Next, we built a database of some fasteners such as a tension bolt, lock wire, thread, pin, and snap ring. Then, we used the design equations to quickly and precisely calculate the various parameters. Finally, we used a configuration design method to generate the shapes automatically using the results of the calculation and the values retrieved from the database. We applied this approach to the design of a propulsion structure, and demonstrated that this approach worked well and saved considerable time.
Keywords
Fastener; CAD; Configuration Design; Tension Bolt;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Kim, B.H., Lee, K.S., Yang, J.S., Lee, D.H., Oh S.J.,Kwon, H.S. and Kim S.H., 2008, “Development of aSolid Fuel Design Automation Program UsingConfiguration Design Method,” Transactions of theSociety of CAD/CAM Engineers, Vol. 13, No. 5, pp.372-381.
2 Lee, J.M. and Han, S.H., 2000, “ConfigurationDesign of Products Using Commercial PartDatabases,” Proceedings of 2000 Korean CAD/CAMConference, pp.117-122.
3 Yoo, W.S. and Kim, S.K., 2000, “Development ofthe 3D Parametric Modeling System for TransmissionGears of Tractor,” Journal of the Society of KoreaIndustrial and Systems Engineering, Vol. 23, No. 57,pp. 87-92.   과학기술학회마을
4 Yoo, W.S. and Jung, J.C., 2002, “Development ofthe Parametric Modeling System for Machine Parts,”Journal of the Society of Korea Industrial and SystemsEngineering, Vol. 25, No. 1, pp. 14-19.   과학기술학회마을
5 Kim, W.H., Koo, S.H., Moon, S.I., Hwang, K.Y.,Lee, K.S. and Seok, J.H., 2006, Development ofAutomatic Design Program for Solid Rocket MotorsStructure,” Journal of the Korean Society ofPropulsion Engineers, Vol. 10, No. 3, pp. 18-25.   과학기술학회마을
6 Han, D.C. and Jung S.M., 2005, Standard Machine Design, Dongmyoungsa, Seoul, pp. 74-239.
7 Norton, R. L., 2006, Machine Design – AnIntegrated Approach, Pearson Prentice Hall, NewJersey, pp. 811-876.
8 http://www.standard.go.kr/
9 Thompson, D. J. and Verheij, J. W., 1997, “TheDynamic Behavior of Rail Fasteners at HighFrequencies,” Applied Acoustics, Vol. 52, No. 1, pp.1-17.   DOI   ScienceOn
10 Ekh, J. and Schon, J., 2007, “Finite ElementModeling and Optimization of Load Transfer in MultifastenerJoints Using Structural Elements,” CompositeStructures, Vol. 82, pp.245-256.   DOI   ScienceOn
11 Pai, N. G. and Hess, D. P., 2001, “ExperimentalStudy of Loosening of Threaded Fasteners due toDynamic Shear Loads,” Journal of Sound andVibration, Vol. 253, No. 3, pp. 585-602.
12 Pai, N. G. and Hess, D. P., 2001, “Three-Dimensional Finite Element Analysis of ThreadedFastener Loosening due to Dynamic Shear Load,”Engineering Failure Analysis, Vol. 9, pp. 383-402.   DOI   ScienceOn