Browse > Article
http://dx.doi.org/10.3795/KSME-A.2009.33.7.621

Wear of Single Crystal Diamond(SCD) Tools in Ultra Precision Turning of Electro-Nickel Plated Drum  

Lee, D.Y. (한국생산기술연구원)
Hong, S.H. (한국생산기술연구원)
Kang, H.C. ((주)코아옵틱스)
Choi, H.Z. (한국생산기술연구원 디지털협업지원센터)
Lee, S.W. (한국생산기술연구원)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.33, no.7, 2009 , pp. 621-628 More about this Journal
Abstract
Nickel-phosphorus alloys are attractive materials for diamond turning applications such as fabrication of large optics and other high precision parts. It is also well-known that the higher phosphorus content of the alloys minimizes the diamond tool wear. Due to the weakness of electoless nickel plating that the phosphorus contents is limited to 13-14% (wgt), increased attention has been paid at electro-nickel plating which enables the alloys with 15-16% phosphorus. In this study, experiments were carried out to observe the wear characteristic of single crystal diamond tools in micro-grooving of electro-nickel plated drums. The experiments shows that long distance (50km) machining of micro-grooving on electro-nickel plated drum is possible with a single crystal diamond tool without any significant tool wear and defective machined surface.
Keywords
Nickel Plated Drum; Tool Wear; Single Crystal Diamond(SCD); Electroplate;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
Times Cited By SCOPUS : 1
연도 인용수 순위
1 Hong, S. M., Je, T. J., Lee, D. J. and Lee, J. C., 2005, 'Machining Characteristics of V-shaped Single Crystal Diamond Tool with Ductile Workpiece,' Journal of the Korea Society of Manufacturing Process Engineers, Vol. 4, No. 4, pp. 28-33
2 Biddut, A. Q., Rahman, M., Neo, K. S., Rezaur, K., Rahman, M., Sawa, M. and Maeda, Y., 2007, 'Performance of Single Crystal Diamond Tools with Different Rake Angles During Micro-Grooving on Electroless Nickel Plated Die Materials,' Int J Adv Manuf Technol, Vol. 33, pp. 891-899   DOI
3 Uddin, M. Sharif, Seah, K. H. W., Rahman, M., Li, X. P. and Liu, K., 2007, 'Performance of Single Crystal Diamond Tools in Ductile Mode Cutting of Silicon,' Journal of Materials Processing Technology, Vol. 185, pp. 24-301   DOI   ScienceOn
4 Kang, I. S., Jeong, Y. S., Kwon, D. H., Kim, J. H., Kim, J. S. and Ahn, J. H., 2006, 'Tool Condition Monitoring using AE Signal in Micro Endmilling,' Journal of the Korea Society of Precision Engineering, Vol. 23, No. 1, pp. 64-71   과학기술학회마을
5 Lee. D. E., Hwang, I., Valente, C. M. O., Oliveira, J. F. G. and Dornfeld, D. A., 2006, 'Precision Manufacturing Process Monitoring With Acoustic Emission,' International Journal of Machine Tools & Manufacture, Vol. 46, pp. 176-188   DOI   ScienceOn
6 Lu, Z. and Yoneyama, T., 1999, 'Micro Cutting in the Micro Lathe Turning System,' International Journal of Machine Tools & Manufacture, Vol. 39, pp. 1171-1183   DOI   ScienceOn
7 Shimada, S., lnamura, T., Higuchi, M., Tanaka, H. and lkawa, N., 2000, 'Suppression of Tool Wear in Diamond Turning of Copper under Reduced Oxygen Atmosphere,' CIRP, Vol. 49, No. 1, pp. 21-24   DOI   ScienceOn
8 Ahn, B. W., Lee, K. H. and Lee, S. H., 2006, 'Characteristic of Ductile Regime AFM Machining Using Acoustic Emission,' Trans. of the KSMTE, Vol. 15, No. 4, pp. 15-21   과학기술학회마을
9 Pramanik, A., Neo, K.S., Rahman, M., Li, X.P., Sawab, M. and Maedab, Y., 2003, 'Cutting Performance of Diamond Tools During Ultra-Precision Turning of Electroless-Nickel Plated Die Materials,' Journals of Materials Processing Technology, Vol. 140, pp. 308-313   DOI   ScienceOn
10 Chae, J., Park, S. S. and Freiheit, T., 2006, 'Investigation of Micro Cutting Operations' Int J Machine Tools&Manufacture, Vol. 46, pp. 313-332   DOI   ScienceOn
11 Mu, Y. H., Hung, N. P. and Ngoi, K. A., 2000, 'Monitoring a Sub-Newton Cutting Force for Ultra- Precision Machining,' The International Journal of Advanced Manufacturing Technology, Vol. 16, pp. 229-232   DOI
12 Hongli, G. and Mingheng, X., 2005, 'Intelligent Tool Condition Monitoring System for Turning Operations,' Lecture Notes in ComputerScience, Advances in Neural Networks, ISNN2005, pp. 883-889