Browse > Article
http://dx.doi.org/10.3795/KSME-A.2008.32.12.1107

Effects of Galvannealing Temperatures on Iron-Zn Intermetallic Compounds and Friction Characteristic of Galvannealed Coatings  

Lee, Jung-Min (한국국제대 자동차공학부)
Kim, Dong-Hwan (한국국제대 자동차공학부)
Lee, Seon-Bong (계명대학교 자동차공학부)
Kim, Dong-Jin (포스코 자동차강재연구가공센터)
Kim, Byung-Min (부산대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.32, no.12, 2008 , pp. 1107-1114 More about this Journal
Abstract
This paper is aimed to understand the effect of different galvannealing temperatures on the frictional properties and Fe-Zn intermetallic phases of the galvannealed (GA) coatings on steel sheets. Their galvannealing treatments were conducted at 465, 505, 515 and $540^{\circ}C$ for about 10s in the additional heating furnace of an industrial continuous hot-dip galvanizing line. The mechanical and the frictional properties of the coatings were estimated using nanoindentation, nanoscratch, micro vickers hardness tests and flat friction tests, which were performed at contact pressures of 4, 20 and 80MPa. Also, the correlation between the microstructure and the frictional properties of the GA coatings were investigated by SEM observation for the cross-section of the GA coating after and before flat friction tests. The results showed that the mechanical and the frictional properties of the coatings are strongly dependent on their phase distributions and microstructure. Especially, in low contact pressure of 4MPa the frictional properties of the coatings were dependent on the surface phases and morphology, while in high contact pressure of 80MPa it was influenced by their mechanical properties based on the dominant phase distributions.
Keywords
Galvannealed Coating; Galvannealing Temperature; Flat - Friction Test;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Alpas, A. T. et al., 2000, “Effect of Microstructure on the Fracture Mechanisms in Galvannealed Coatings,” ISIJ International, Vol. 40, No. 2, pp. 172-181   DOI
2 Nanoindenter XP System Manual ver. 10, MTS
3 Urai, M. et al., 1997, “Effect of Press-Forming Conditions and Coating Structure on Flaking Phenomenon in Galvannealed Steel Sheets,” Materials Technology for Automobiles, Vol. 47, No. 2, pp. 29-32
4 Lin, C.S. et al., 1995, “Phase Evolution in Galvanneal Coatings on the Steel Sheets,” ISIJ International, Vol. 35, No. 5, pp. 503-511   DOI
5 Rieth, M. and Schommer, W., 2004, Handbook of Theoretical and Computational Nanotechnology, Vol. 4, ASP, Stevenson Ranch, California 91381-1439, USA, pp. 387-461
6 Oliver, W. C. and Pharr, G. M., 1992, “An Improved Technique for Determining Hardness and Elastic-Modulus Using Load and Displacement Sensing Indentation Experiments,” J. of Materials Research, Vol. 7, No. 6, pp. 1564-1583   DOI
7 Rangarajan, V. et al.,1996, “Influence of Strain State on Powdering of Galvannealed Sheet Steel,” Proceeding of SAE, pp. 63-70
8 Nunomura, Y. et al., 2003, “Plastic Deformation and Fracture Behavior of Galvannealed Coating,” ISIJ International, Vol. 43, No. 3, pp. 454-460   DOI
9 Lee, J. M., et al., 2006, “Evaluation of Friction Characteristic of Galvannealed Sheet Steel with Different Annealing Temperature at Lower Normal Loads,” J. of KSPE, Vol. 23, No. 4, pp. 109-115
10 Scheers, J. et al., 1996, “The Frictional Properties of Galvannealed Steel Sheets,” 19th IDDRG Biennial Congress, pp. 515-525
11 HiRa, T. et al., 1993, “Friction Behavior of Coated Steels in Sheet Forming,” J. of JSTP, Vol. 34, No. 393, pp. 1141-1146
12 Kim, Y. S. et al., 1990, “A Study of the Frictional Characteristics of Galvanized Sheet Steels for Automobiles,” J. of KSME A, Vol. 14, No. 6, pp. 1474-1486   과학기술학회마을
13 Cheng, C. et al., 1995, “Forming Characteristics of Galvannealed Coatings on IF and P-Bearing Steels,” GALVATECH 95 Proceedings, pp. 723-731
14 Kunde, N. D. et al., 1998, “Correlation of Prephosphate Treatment, Surface Friction and Powdering of Galvannealed During Forming,” Proceeding of SAE, pp. 1-6
15 Marder, A. R., 2000, “The Metallurgy of Zinc-Coated Steel,” Progress in Material Science, Vol. 45, pp. 197-271   DOI   ScienceOn
16 Hong, M. H., 2005, “Correlation Between the Microstructure of Galvannealed Coatings and the Defoliation During Press Forming,” ISIJ International, Vol. 45, No. 6, pp. 896-902   DOI
17 Kim, Y. S. et al., 1991, “Frictional Characteristics of Electro Zn-Ni Alloy Coated Steel Sheets,” J. of KSME A, Vol. 15, No. 6, pp. 1807-1818   과학기술학회마을
18 Lee, J. M. et al., 2006, “Identification of the Bulk Behavior of Coatings by Nanodentation Test and FE Simulation and Its Application to Forming Analysis of the Coated Steel Sheet,” J. of KSME A, Vol. 30, No. 11, pp. 1425-1432   과학기술학회마을   DOI   ScienceOn
19 Garza, L. G. et al., 2007, “Friction and Formability of Galvannealed Interstitial Free Sheet Steel,” JMPT, 187-188, pp. 164-168   DOI   ScienceOn