Browse > Article
http://dx.doi.org/10.3795/KSME-A.2008.32.11.918

Feasibility Study of the Damage Monitoring for Composite Materials by the Piezoelectric Method  

Hwang, Hui-Yun (안동대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.32, no.11, 2008 , pp. 918-923 More about this Journal
Abstract
Since crack detection for laminated composites in-service is effective to improve the structural reliability of laminated composites, it have been tried to detect cracks of laminated composites by various nondestructive methods. An electric potential method is one of the widely used approaches for detection of cracks for carbon fiber composites, since the electric potential method adopts the electric conductive carbon fibers as reinforcements and sensors and the adoption of carbon fibers as sensors does not bring strength reduction induced by embedding sensors into the structures such as optical fibers. However, the application of the electric method is limited only to electrically conductive composite materials. Recently, a piezoelectric method using piezoelectric characteristics of epoxy adhesives has been successfully developed for the adhesive joints because it can monitor continuously the damage of adhesively bonded structures without producing any defects. Polymeric materials for the matrix of composite materials have piezoelectric characteristics similarly to adhesive materials, and the fracture of composite materials should lead to the fracture of polymeric matrix. Therefore, it seems to be valid that the piezoelectric method can be applied to monitoring the damage of composite materials. In this research, therefore, the feasibility study of the damage monitoring for composite materials by piezoelectric method was conducted. Using carbon fiber epoxy composite and glass fiber composite, charge output signals were measured and analyzed during the static and fatigue tests, and the effect of fiber materials on the damage monitoring of composite materials by the piezoelectric method was investigated.
Keywords
Piezoelectric Method; Damage Monitoring; Composite Material;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 2
연도 인용수 순위
1 Mallick, P. K., 1988, Fiber-Reinforced Composites, Marcel Dekker, New Yourk, pp. 417~425
2 Scott, I. G.. and Scala, C. M., 1982, "A Review of Non-Destructive Testing of Composite Materials," NDT international, Vol. 15, No. 2, pp. 75~86   DOI   ScienceOn
3 Kitade, S., Fukuda, T., Osaka, K. and Hamamoto, A., 1996, "Detection of Damages in Composite Laminates with Embedded Optical Fibers," Smart Materials & Structures, Vol. 4, No. 2, pp. 283~290
4 Kwon, J. W., Chin, W. S. and Lee, D. G., 2003, "Reliability Monitoring of Adhesive Joints by Piezoelectricity," Trans. of the KSME(A), Vol. 27, No. 8, pp. 1388~1397   과학기술학회마을   DOI   ScienceOn
5 Kwon, J. W., Chin, W. S. and Lee, D. G., 2003, "Piezoelectric Monitoring of the Reliability of Adhesive Joints," Journal of Adhesion Science and Technology, Vol. 17, No. 6, pp. 777~796   DOI   ScienceOn
6 Hwang, H. Y. and Lee, D. G., 2005, "Diagnosis Criterion for Damage Monitoring of Adhesive joints by the Piezoelectric Method," Journal of Adhesion Science and Technology, Vol. 19, No. 12, pp. 1053~1080   DOI   ScienceOn
7 Ikeda, T., 1996, Fundamentals of Piezoelectricity, Oxford Science Publication, Oxford, pp. 15~30
8 Wang, X. and Chung, D. D. L., 1997, "Real-time Monitoring of Fatigue Damage and Dynamic Strain in Carbon Fiber Polymer-matrix Composite by Electrical Resistance Measurement," Smart Materials and Structures, Vol. 6, No. 4, pp. 504~508   DOI   ScienceOn
9 Hwang, H. Y., Kim, B. J., Chin, W. S., Kim, H. S. and Lee, D. G., 2005, "Prediction of the Crack Length and Crack Growth Rate of Adhesive Joints," Journal of Adhesion Science and Technology, Vol. 19, No. 12, pp. 1081~1111   DOI   ScienceOn
10 Todoroki, A. and Suzuki, H., 1998, "Evaluation of Orthotropic Electrical Resistance for Delamination Smart Detection of Graphite/Epoxy Composites by Electric Potential Method," Proceedings of 1st Asian-Australian Conference on Composite Materials, pp. 630~633