Browse > Article
http://dx.doi.org/10.3795/KSME-A.2007.31.11.1100

Material Parameters Identification of Adhesive in Layered Plates Using Moiré Interferomety and Optimization Technique  

Joo, Jin-Won (충북대학교, 기계공학부)
Kim, Han-Jun (충북대학교 대학원 기계공학과)
Lee, Woo-Hyuk (한국항공대학교, 항공우주 및 기계공학부)
Kim, Jin-Young (한국항공대학교, 항공우주 및 기계공학부)
Choi, Joo-Ho (한국항공대학교, 항공우주 및 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.31, no.11, 2007 , pp. 1100-1107 More about this Journal
Abstract
In this study, a method to characterize material properties of adhesive that is used in a layered plates bonding process is developed by combined evaluation of experiment, simulation and optimization technique. A small bonded specimens of rectangular plate are prepared to this end, and put into a thermal loading conditions. $Moir{\acute{e}}$ interferomety is used to measure submicron displacements occurred during the process. The elevated temperature is chosen as control factors. FE analysis with constant values for the adhesive materials is also carried out to simulate the experiment. Significant differences are observed from the two results, in which the simulation predicts the monotonic increase of the bending displacement whereas the measurement shows decrease of the displacement at above $75^{\circ}C$. In order to minimize the difference of the two, material parameters of the adhesive at a number of different temperatures are posed as unknowns to be determined, and optimization is conducted. As a result, optimum material parameters are found that excellently matches the simulation and experiment, which are decreased with respect to the temperature.
Keywords
Layered Plates; $Moir{\acute{e}}$ Interferometry; Optimization; Material Parameter Identification; Adhesive;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 1
연도 인용수 순위
1 Yacobi B., et al., 2002, 'Adhesive Bonding in Microelectronics and Photonics,' Journal of Applied Physics, Vol. 91, No. 10, pp. 6227-6262   DOI   ScienceOn
2 Basaran, C. and Zhao, Y., 2001, 'Mesh Sensitivity and FEA for Multi-Layered Electronic Packaging,' Trans. ASME, J. Electron. Packag, Vol. 123, No. 5, pp. 218-224   DOI   ScienceOn
3 Suhir, E., 2001, 'Predicted Thermal Stresses in a Bimaterial Assembly Adhesively Bonded at the Ends,' Journal of Applied Physics, Vol. 89, No. 5, pp. 120-129   DOI   ScienceOn
4 Joo, J. W., Chai S. E., Shin, D. I., 2001, 'Deformation Analysis of Composite-Patched Concrete Using Moiré Interferometry,' Transactions of the KSME, A, Vol.26, No.1, pp.160-170   과학기술학회마을   DOI   ScienceOn
5 Post, D., Wood. J. D., Han, B. Parks, V. J. and Gerstle, Jr., F. P., 1994, 'Thermal Stresses in a Bimaterial Joint: An Experimental Analysis,' J. Applied Mechanics, Trans. ASME, Vol. 61, No. 1, pp. 192-198   DOI   ScienceOn
6 Joo, J. and Cho, S., 2004, 'Evaluation of Thermal Deformation Model for BGA Packages Using Moire Interferometry,' KSME International Journal, Vol. 2, No. 2, pp.230-239   과학기술학회마을
7 Post, D., Han, B. and Ifju, P., 1994, 'High Sensitivity Moire: Experimental Analysis for Mechanics and Materials,' Springer-Verlag, New York
8 Guo, Y., Lim, C. K., Chen, W. T. and Woychik, C. G., 1993, 'Solder Ball Connect (SBC) Assemblies Under Thermal Loading: I. Deformation Measurement Via Moire Interferometry, and Its Interpretation,' IBM J. Research Development, Vol. 37, No. 5, pp. 635-648   DOI
9 Han, B., 1997, 'Deformation Mechanism of Two Phase Solder Column Interconnections Under Highly Accelerated Thermal Cycling Condition: an Experimental Study,' J. Electronic Packaging, Tran. ASME, Vol. 119, pp. 189-196   DOI   ScienceOn
10 Han, B. and Guo, Y., 1995, 'Thermal Deformation Analysis of Various Electronic Packaging Products by Moire and Microscopic Moire Interferometry,' J. Electronic Packaging, Trans. ASME, Vol. 117, pp. 185-191   DOI
11 Han, B., 1998, 'Recent Advancements of Moire and Microscopic Moire Interferometry for Thermal Deformation Analysis of Microelectrics Devices,' Experimental Mechanics, Vol. 38, No. 4, pp. 278-288
12 Joo, J. W and Oh, K. W, 2004, 'Submicro-Displacement Measuring System with Moir$\ Interferometer and Application to the Thermal Deformation of PBGA Package,' Transactions of the KSME, A, Vol.28, No.11, pp.1646-1655   과학기술학회마을   DOI   ScienceOn
13 Plotner, M., Donat, B. and Benke, A., 1991, 'Deformation Properties of Indium-based Solders at 294 and 77k,' Cryogenic, Vol. 31, pp. 159-162   DOI   ScienceOn
14 Joo, J. W., Cho, S and Han, B,, 2005, 'Characterization of Flexural and Thermo-mechanical Behavior of Plastic Ball Grid Array Package Assembly Using Moire Interferometry,' Micrelectronics Reliability, Vol. 45, Iss. 4, pp.637-646   DOI   ScienceOn