1 |
Chen, F. K. and Chen, C. J., 2000, 'On the Nonuniform Deformation of the Cylinder Compression Test,' Transactions of the ASME., Vol. 122, pp. 192-197
DOI
ScienceOn
|
2 |
Narayanasamy, R., Murthy, R. S. N., Viswanatham, K. and Chary, G. R., 1988, 'Prediction of the Barreling of Solid Cylinders under Uniaxial Compressive Load,' Journal of Mechanical Working Technology., Vol. 16, pp. 21-30
DOI
ScienceOn
|
3 |
Banerjee, J. K., 1985, 'Barreling of Solid Cylinders under Axial Compression,' Transactions of the ASME., Vol. 107, pp. 138-144
DOI
|
4 |
Schey, J. A., Venner, T. R. and Takornana, S. L., 1982, 'Shape Changes in the Upsetting of Slender Cylinders,' Journal of Engineering for Industry., Vol. 104, pp. 79-83
DOI
|
5 |
Ma, X., Barnett, M. R. and Kim, Y. H., 2003, 'Experimental and Theoretical Investigation of Compression of a Cylinder using a Rotating Platen,' International Journal of Mechanical Sciences., Vol. 45 pp. 1717-1737
DOI
ScienceOn
|
6 |
Kulkarni, K. M. and Kalpakjian, S., 1969, 'A Study of Barreling as an Example of Free Deformation in Plastic Working,' Journal of Engineering for Industry., pp. 743-754
|
7 |
Lin, S. Y. and Lin, F. C., 2003, 'Influences of the Geometrical Conditions of Die and Workpiece on the Barreling Formation during Forging-Extrusion Process,' J. Mater. Process. Technol., Vol. 140, pp. 54-58
DOI
ScienceOn
|
8 |
Altan, T. and Cho, H. J., 2003, 'Determination of Flow Stress and Interface Friction at Elevated Temperatures by Inverse Analysis Technique,' J. Mater. Process. Technol., Vol. 170, pp. 64-70
DOI
ScienceOn
|
9 |
Ebrahimi, R. and Najafizadeh, A., 2004, 'A New Method for Evaluation of Friction in Bulk Metal Forming,' J. Mater. Process. Technol., Vol. 152, pp. 136-143
DOI
ScienceOn
|
10 |
Lin, S. Y. and Lin, F. C., 2003, 'Prediction of Fold Defect in Barreling F orrnations of Cylinder upsetting,' Finite Elements in Analysis and Design., Vol. 39, pp. 325-341
DOI
ScienceOn
|
11 |
Altan, T., Ngaile, G and Shen, G, 2005, 'Cold and Hot Forging, Fundamentals and Application,' ASM International, pp. 25-49, 67-89
|
12 |
Altan, T., 2004, 'Material Properties and Cold Forging Lubricants,' Prepared for 2nd Cold and Warm Precision Forging Workshop
|
13 |
Altan, T. and Cho, H. J., 2003, 'Simultaneous Determination of Flow Stress and Interface Friction by Finite Element Based Inverse Analysis,' Prepared for 53rd CIRP General Assembly
|
14 |
Xu, W. L., Rao, K. P., Watanabe, T. and Hua, M., 1994, 'Analysis of Ring Compression Using Artificial Neural Network,' J. Mater. Process. Technol., Vol. 44, No. 3, pp. 301-308
DOI
ScienceOn
|
15 |
Osakada, K., Kawasaki, T., Mori, K. and Taniguchi, N., 1981, 'Method of Determining Flow Stress under Forming Conditions,' Annals of the CIRP., Vol. 30, No. 1, pp. 135-138
DOI
ScienceOn
|
16 |
Choi, Y. M. and Kim, N. S. 1994, 'Determination of Flow Stress and Friction Factor by the Ring Compression Test (II),' Journal of the KSTP., Vol. 3, No.2, pp. 215-226
|
17 |
Choi, Y., Kim, H. K., Cho, H. Y., Kim, B. M. and Choi, J. C., 1998, 'A Method of Determining Flow Stress and Friction Factor Using an Inverse Analysis in Ring Compression Test,' Journal of KSTP., Vol. 22, No.3, pp. 483-492
|
18 |
Rao, K. P. and Xu, W. L., 1995, 'Neural Evaluation of Friction and Flow Stress Adaptive to Ring Geometry,' JSME. International. Journal. Series A., Vol. 38, No.4, pp. 506-514
|
19 |
Kim, N. S. and Kim, H. J., 2002, 'Metal Forming and Analysis,' 2002, Press. of Mun-Un Dang, pp. 136-144
|
20 |
Hwu, Y. J., Hsu, C. T. and Wang, F., 1993, 'Measurement of Friction and the Flow Stress of Steels at Room and Elevated Temperatures by Ring Compression Tests,' J. Mater. Process. Technol., Vol. 37, No. 1, pp. 319-335
DOI
ScienceOn
|
21 |
Bugini, A., Maccarini, G and Giardini, C., 1993, 'The Evaluation of Flow Stress and Friction in Upsetting of Rings and Cylinders,' Annals of the CIRP., Vol. 42, No.1, pp. 335-338
DOI
ScienceOn
|
22 |
Lee, C. H. and Altan, T., 1972, 'Influence of Flow Stress and Friction upon Metal Flow in Upset Forging of Ring and Cylinders,' ASME. Transactions. J. of Engr.for Industry., p. 775
|
23 |
Kim, T. J. and Kim, N. S., 2003, 'Determination of Material Properties of Tube using Inverse Engineering and Analytic Method in Tube Bulge Test,' Journal of KSTP., Vol. 27, No.9, pp. 1508-1516
|
24 |
Arora, J. S., 1989, 'Introduction to Optimum Design,' McGraw-Hill. Inc., pp. 287-304, 316-319
|
25 |
DEFORM 3D, version 5.0, 'DEFORM 3D version 5.0 user's manual
|
26 |
Malayappan, S. and Narayanasamy, R., 2004, 'An Experimental Analysis of Upset Forging of Aluminium Cylindrical Billets Considering the Dissimilar Frictional Conditions at Flat Die Surfaces,' Int. J. Adv. Manuf. Technol., Vol. 23, pp. 636-643
DOI
|
27 |
Kalpakjian, S., 1991, 'Manufacturing Processes for Engineering Materials,' Press of Addison-Wesley, pp. 166-188
|
28 |
DEFORM 2D, version 8.0, 'DEFORM 2D version 8.0 user's manual
|
29 |
Narayanasamy, R., and Ponalagusamy, R., 'Cold Forging,' Unpublished Report. Regional Engineering College. Tiruchirappalli. 620015. India
|
30 |
Narayanasamy, R., Sathiyanarayanan, S. and Ponalagusamy, R., 2000, 'A Study on Barrelling in Magnesium Alloy Solid Cylinders during Cold Upset Forming,' J. Mater. Process. Technol., Vol. 101, pp. 64-69
DOI
ScienceOn
|
31 |
Narayanasamy, R. and Pandey, K. S., 1997, 'Phenomenon of Barrelling in Aluminium Solid Cylinders during Cold Upset Forming,' J. Mater. Process. Technol., Vol. 70, pp. 17-21
DOI
ScienceOn
|